1
Brackets & mounts
Wahoo ELEMNT Bolt out-front mount for 35 mm bars
Oversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only. This out-front mount clamps a 35 mm bar directly, without shims, and carries a Wahoo ELEMNT Bolt v2 (77 x 47 x 21 mm) flush and level so the aero profile of the head unit is preserved. The puck follows Wahoo's own quarter-turn tab layout, the arm is 70 mm long and 9 mm thick with a hollow underside rib, and the two-bolt clamp uses M5 hardware. Print it head-face down in PETG or ASA so trail vibration never fatigues the layers. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| handlebar diameter | 35 mm |
| clamp wall thickness | 6 mm |
| length along bar axis (Y) | 20 mm |
| split gap at front (closes when bolted) | 3 mm |
| width of bolt lugs | 10 mm |
| thickness of bolt lugs (along Y, matches clamp_len) | 8 mm |
| M5 clearance hole | 5.4 mm |
| plate thickness | 3 mm |
| tab radial length | 5 mm |
| tab height | 3 mm |
| per-side clearance added to tabs | 0.2 mm |
Example prompt
Model an out-front computer mount with a 35 mm split handlebar clamp using two M5 bolts, a 70 mm long 9 mm thick arm with a ribbed underside, and a Wahoo quarter-turn puck with four tabs, 3 mm walls and 0.2 mm tab clearance.
Fit notes
Measuring your bar and stem and generating the mount around those numbers means no stack of rubber shims and no head unit drooping over time. Describe the clamp diameter, reach and tilt in SpeakCAD, preview the part in the browser, adjust it in the chat, then download the STL.
Questions people ask about a Wahoo ELEMNT Bolt out-front mount for 35 mm bars
Oversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only. This out-front mount clamps a 35 mm bar directly, without shims, and carries a Wahoo ELEMNT Bolt v2 (77 x 47 x 21 mm) flush and level so the aero profile of the head unit is preserved. The puck follows Wahoo's own quarter-turn tab layout, the arm is 70 mm long and 9 mm thick with a hollow underside rib, and the two-bolt clamp uses M5 hardware. Print it head-face down in PETG or ASA so trail vibration never fatigues the layers.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Nintendo Switch OLED dock wall mount holderReady-made, opens free. A wall bracket that holds the Nintendo Switch dock beside or behind a TV so the console docks vertically and the HDMI, power and USB cables stay hidden.Philips Hue Go 2 wall shelf with USB-CReady-made, opens free. A 160 mm shelf that holds a Hue Go 2 and drops a USB-C cable through a 8 mm hole.Wall bracket for a small bookshelf speakerReady-made, opens free. A wedge-shaped bracket that lifts a compact speaker onto the wall and angles it slightly downward toward the listening position.Quad Lock wall mount plate for shower or workshopReady-made, opens free. A flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.Scotty rod holder base adapter for kayak trackReady-made, opens free. A plate that lets a Scotty 241 or 244 round deck mount, and therefore any Scotty rod holder, bolt onto the 25 mm gear track found on Oru Kayak, Perception, O…IKEA Skadis hook for Knipex Cobra and combination pliersReady-made, opens free. A double-prong Skadis hook that hangs a Knipex Cobra 250 or combination pliers by the open jaws so the handles dangle in reach.