Furbo dog camera wall mount bracket
A bracket that lifts a Furbo Dog Camera or Furbo 360 off the floor and onto the wall so the treat tosser clears the sofa and curious dogs cannot knock it over. The Furbo base is a cylinder around 120 mm in diameter, so the bracket has a 122 mm cup with a 20 mm retaining lip and a rear opening for the USB-C cable. A 100 by 120 mm back plate carries two 5 mm keyhole slots on 60 mm centres, and a 45 degree gusset underneath supports the 1 kg unit. Walls are 4 mm; print the plate flat with the cup up and add supports only under the gusset.
Mounting height and wall type differ in every home, so a bracket generated to your Furbo model and screws sits securely without guesswork. In SpeakCAD you name the model and wall fixings, preview the mount in the browser at no cost, tilt the cup 10 degrees in the chat and download the STL or 3MF.
Create a wall bracket with a 100 x 120 mm back plate 4 mm thick with two 5 mm keyhole slots on 60 mm centres, a shelf with a 122 mm cup and a 20 mm retaining lip for a Furbo dog camera base, a 30 mm rear cable opening and a 45 degree gusset underneath, all 4 mm walls.