1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
IKEA SKÅDIS 6 mm cable-hook pair
This is not a fixed STL. SpeakCAD generates the ikea skådis 6 mm cable-hook pair to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea skådis 6 mm cable-hook pair is
A pair of SKÅDIS hooks that park 6 mm USB-C or IEC cables in a 8 mm saddle so they do not knot behind the board. Each hook is 20 × 16 × 18 mm with one official peg. Print two in PETG.
The official plastic hook is too open. In SpeakCAD you add a third hook, preview a pair in the browser at no cost, then download the STL.
Example prompt
Design SKÅDIS 6 mm cable hooks, 8 mm saddle, official peg, PETG, pair.
People also search
skadis cable hook stlikea skadis cord hook 3d printskadis usb cable holderskadis 6mm hook 3d model
Questions people ask about a ikea skådis 6 mm cable-hook pair
A pair of SKÅDIS hooks that park 6 mm USB-C or IEC cables in a 8 mm saddle so they do not knot behind the board. Each hook is 20 × 16 × 18 mm with one official peg. Print two in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design SKÅDIS 6 mm cable hooks, 8 mm saddle, official peg, PETG, pair.
The official plastic hook is too open. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Bambu Lab AMS desiccant holder tray for silica beadsA vented tray that clips into the unused floor space at the front of the Bambu Lab AMS, between the spool rollers, and holds about 60 g of loose silica gel b…Boss pedal patch cable and 9V power lead organizerA gig-bag tray that keeps the small stuff behind a pedalboard sorted: 15 cm patch cables, 5.5 x 2.1 mm 9 V daisy-chain leads for Boss and Strymon pedals, spa…Folding hex-key set wall holderA wall plate that holds two folding hex sets (metric and imperial) in 22 × 10 mm pockets with a 4.5 mm hole pair.IKEA TROFAST bin-lid clip pairA pair of clips that keep a TROFAST bin lid (about 42 × 30 cm) from sliding off in a car or under a bed.Framework 13 HDMI-module trayA tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag.Apple Watch band organizer drawer insert with lug railsA drawer insert with a row of rails that copy the Apple Watch case slot, so Sport, Solo Loop and Braided bands for 42, 44, 45, 46 and 49 mm watches slide on…