1
Organizers & storage
French cleat shelf for a Stanley No. 4 hand plane
This is not a fixed STL. SpeakCAD generates the french cleat shelf for a stanley no. 4 hand plane to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a French cleat hand plane shelf, 260×72 mm tray, 12 mm lip, 6 mm toe riser strip, 45 degree cleat for 19 mm plywood, PETG.
What a french cleat shelf for a stanley no. 4 hand plane is
A plane shelf for a Stanley or Record No. 4 smoothing plane (about 245 mm long with a 60 mm wide sole). The tray is 260 × 72 mm with a 12 mm lip, and a 6 mm raised strip under the toe keeps the iron off the shelf. The back is a 45 degree cleat for 19 mm plywood. Print it in two halves in PETG with 1.6 mm walls.
A No. 5 jack plane is about 355 mm long and overhangs this tray. Open the ready-made shelf in SpeakCAD for free, change the length in the viewer or the chat, then download the STL.
People also search
hand plane storagefrench cleat plane holder stlstanley no 4 plane rackplane shelf 3d print
Questions people ask about a french cleat shelf for a stanley no. 4 hand plane
A plane shelf for a Stanley or Record No. 4 smoothing plane (about 245 mm long with a 60 mm wide sole). The tray is 260 × 72 mm with a 12 mm lip, and a 6 mm raised strip under the toe keeps the iron off the shelf. The back is a 45 degree cleat for 19 mm plywood. Print it in two halves in PETG with 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a French cleat hand plane shelf, 260×72 mm tray, 12 mm lip, 6 mm toe riser strip, 45 degree cleat for 19 mm plywood, PETG.
A No. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Gridfinity 4 × 4 baseplate that fits the Bambu Lab A1 miniA 4 × 4 Gridfinity baseplate, 168 × 168 mm, that prints in one piece on the 180 × 180 mm bed of a Bambu Lab A1 mini.Hex key holder rack for bike workshop toolsA bench or pegboard rack that holds the hex keys, Torx keys and a Park Tool chain tool that every home bike mechanic reaches for: seven graduated hex slots f…Sony NP-FZ100 battery case for four batteriesA pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a fl…Thru-axle thread-on derailleur-hanger holderA 12 mm dummy axle that holds a spare UDH or brand hanger on the workbench so the threads do not roll into the chip tray.Bosch Click & Go rail hookA hook that snaps onto a Bosch Click & Go rail and holds a tape or knife.CFexpress Type B and SD card walletA hinged wallet for four CFexpress Type B cards (38.5 × 29.8 × 3.8 mm) and four SD cards (32 × 24 × 2.1 mm).