KitchenAid attachment holder rack for pasta roller and grinder
A rack that stores KitchenAid power hub attachments upright by their drive shafts so the pasta roller, fettuccine cutter and food grinder stop rattling loose in a cupboard. Every hub attachment shares the same shaft, roughly 22 mm in diameter with a flat and a pin, so the rack has five 23 mm sockets 30 mm deep on 90 mm centres, each with a keyway that keeps the attachment from spinning. The base is 400 by 120 mm with 3 mm walls and rubber foot recesses, and the sockets sit in a raised block so heavy attachments cannot topple it. Print flat.
Which attachments you own and how wide your shelf is vary, so a rack generated to your collection fits better than a fixed five-slot download. In SpeakCAD you list the attachments and shelf depth, preview the rack in the browser at no cost, ask for a wall-hung version in the chat and download the STL or 3MF.
Design an attachment rack 400 mm long, 120 mm wide and 45 mm tall with 3 mm walls and five 23 mm diameter sockets 30 mm deep on 90 mm centres, each with a 4 mm keyway, for KitchenAid power hub attachment shafts, plus four 20 mm recesses underneath for rubber feet.