1
Hobby & gaming
D&D dice tower shaped like a dungeon turret
A crenellated stone turret that doubles as a dice tower for Dungeons & Dragons, Pathfinder and Warhammer sessions. Dice drop through a 40 mm square opening at the top, bounce down three internal baffles set at 30 degrees, and roll out through an arched 45 x 30 mm doorway into a 90 x 60 mm tray, so even a chunky 20 mm d20 or a 30 mm oversize d20 cannot jam. The tower is 160 mm tall with 2.4 mm walls, a brick texture 0.6 mm deep on the outside, arrow-slit windows so you can see a die falling, and prints upright in one piece with the tray attached. The baffle angle guarantees a real tumble rather than a slide. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| wall thickness | 2.4 mm |
| tower height | 160 mm |
| tower outer width (square) | 90 mm |
| top drop opening size | 40 mm |
| baffle passage width | 35 mm |
| baffle thickness | 2.4 mm |
| arch exit width | 45 mm |
| arch exit height | 30 mm |
| crenellation height | 10 mm |
| merlon width | 12 mm |
| brick texture relief | 0.6 mm |
Example prompt
Design a dungeon turret dice tower 160 mm tall with a 40 mm square drop opening, three internal baffles at 30 degrees with 35 mm passages for a 30 mm d20, a 45 x 30 mm arched exit into an attached 90 x 60 x 15 mm tray, crenellations, 0.6 mm brick texture and 2.4 mm walls.
Fit notes
Instead of a random castle model, you tell SpeakCAD the tabletop theme you want, the largest die you own and how tall your screen is, preview the tower in the browser, ask for a dragon-skull version in the chat and download the STL.
Questions people ask about a D&D dice tower shaped like a dungeon turret
A crenellated stone turret that doubles as a dice tower for Dungeons & Dragons, Pathfinder and Warhammer sessions. Dice drop through a 40 mm square opening at the top, bounce down three internal baffles set at 30 degrees, and roll out through an arched 45 x 30 mm doorway into a 90 x 60 mm tray, so even a chunky 20 mm d20 or a 30 mm oversize d20 cannot jam. The tower is 160 mm tall with 2.4 mm walls, a brick texture 0.6 mm deep on the outside, arrow-slit windows so you can see a die falling, and prints upright in one piece with the tray attached. The baffle angle guarantees a real tumble rather than a slide.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
Citadel paint pot rack for 26 mm potsReady-made, opens free. A three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…WLED hex-panel stand for six cellsReady-made, opens free. A stand that holds a six-cell WLED hex (about 300 mm across) at 15 degrees with a 20 mm USB-C well in the base.Xbox Elite Series 3 paddle standReady-made, opens free. A stand that holds an Elite Series 3 without flattening the rear paddles, 30 mm clearance and a 14 mm USB-C slot.Apple Vision Pro battery-pack belt clipReady-made, opens free. A clip that parks the Vision Pro battery pack on a 40 mm belt so the cable does not yank the headset, 70 × 40 mm saddle.Paint bottle rack for dropper bottlesReady-made, opens free. Dropper-bottle paints in the 17 ml size are about 26 mm in diameter and 70 mm tall, and a tiered rack keeps labels visible and bottles off the work surface.Nintendo Switch 2 Pro Controller display standReady-made, opens free. A low cradle that holds a Nintendo Switch 2 Pro Controller (or the original Switch Pro Controller, about 152 x 106 x 60 mm) upright on a shelf with the face…