1
Hobby & gaming
Citadel paint pot rack for 26 mm pots
A three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degrees so you can read the label on every pot. Each socket is 27 mm in diameter and 18 mm deep, a 0.5 mm oversize that lets a pot drop in without rattling, with a fingertip cutout at the front of each hole. Tiers are spaced 40 mm apart and 30 mm back, keeping every row visible. The rack prints in one piece on its back with 1.6 mm walls and a 3 mm floor, and dovetail ends let two racks butt together on a shelf. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| socket diameter | 27 mm |
| socket depth | 18 mm |
| wall thickness around/between sockets | 1.6 mm |
| sockets per tier per half (10 total per tier across both halves) | 5 |
| number of tiers | 3 |
| vertical rise between tiers | 40 mm |
| horizontal (y) setback between tiers | 30 mm |
| height of lowest tier block | 24 mm |
| dovetail protrusion/pocket depth | 6 mm |
| dovetail neck width | 6 mm |
| dovetail tip width | 10 mm |
| dovetail clearance | 0.3 mm |
Example prompt
Create a stepped paint rack for 30 Citadel paint pots with three tiers of ten sockets 27 mm diameter and 18 mm deep at 32 mm pitch, tiers 40 mm apart and set back 30 mm, 15 degree tilt, a fingertip cutout per socket, 1.6 mm walls, 3 mm floor and dovetail joints on both ends.
Fit notes
A rack for another brand's pots will not hold Citadel's shorter, wider ones. In SpeakCAD you describe the pot you own, choose rows and columns, view the rack in the browser, ask for a mixed row of Contrast pots in the chat, and download the STL.
Questions people ask about a Citadel paint pot rack for 26 mm pots
A three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degrees so you can read the label on every pot. Each socket is 27 mm in diameter and 18 mm deep, a 0.5 mm oversize that lets a pot drop in without rattling, with a fingertip cutout at the front of each hole. Tiers are spaced 40 mm apart and 30 mm back, keeping every row visible. The rack prints in one piece on its back with 1.6 mm walls and a 3 mm floor, and dovetail ends let two racks butt together on a shelf.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
Pedaltrain Nano Plus power-supply mountReady-made, opens free. A mount that hangs a 9 V brick under a Nano Plus with two 6 mm zip-tie slots matching the rail.Model kit sprue cutter holder and parts trayReady-made, opens free. Building plastic model kits means dozens of tiny parts and a few sharp tools that roll off the bench.Nintendo Switch Joy-Con comfort grip for single controllerReady-made, opens free. A palm-filling grip that a single Joy-Con slides onto for sideways two-player sessions in Mario Kart or Smash.Warhammer 40k 32 mm round base movement trayReady-made, opens free. A skirmish movement tray that carries ten Warhammer 40,000 infantry on 32 mm round bases in two ranks of five, so a whole squad of Intercessors or Necron War…Apple Vision Pro 2 Light Seal standReady-made, opens free. A desk stand that holds Apple Vision Pro 2 (about 200 mm wide) on its Light Seal so the displays stay off the desk.DualSense Edge back-paddle restReady-made, opens free. A rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.