1
Hobby & gaming
Model kit sprue cutter holder and parts tray
Building plastic model kits means dozens of tiny parts and a few sharp tools that roll off the bench. This tray combines a shallow sorting area of 120 x 80 mm with numbered compartments 15 mm deep and a vertical slot at the back that holds sprue cutters, a hobby knife and tweezers blade-down. Walls of 1.5 mm, a 3 mm base and a 2 mm chamfer under the front edge keep it stable while you cut parts loose. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| total width (X) | 160 mm |
| total depth (Y) | 100 mm |
| wall thickness | 1.5 mm |
| base thickness | 3 mm |
| pocket depth | 15 mm |
| depth of front compartment zone | 70 mm |
| depth of rear block (tray_d - front_zone_d) | 30 mm |
| total height of rear block (from base top) | 40 mm |
Example prompt
Design a hobby tray 160 x 100 mm with six 15 mm deep sorting compartments at the front, a rear block 40 mm tall with three vertical tool slots of 12 x 4, 15 x 6 and 10 x 3 mm, 1.5 mm walls and a 3 mm base.
Fit notes
SpeakCAD lets you decide the compartment count, the tool slot widths and the total footprint for your own workbench rather than accepting whatever a shared file offers. Ask for a sanding stick holder or a glue bottle pocket in the chat and preview the result in the browser.
Questions people ask about a model kit sprue cutter holder and parts tray
Building plastic model kits means dozens of tiny parts and a few sharp tools that roll off the bench. This tray combines a shallow sorting area of 120 x 80 mm with numbered compartments 15 mm deep and a vertical slot at the back that holds sprue cutters, a hobby knife and tweezers blade-down. Walls of 1.5 mm, a 3 mm base and a 2 mm chamfer under the front edge keep it stable while you cut parts loose.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
Tripod phone clamp with quarter-inch threadReady-made, opens free. A phone clamp turns any tripod into a video rig, and a printed one can be sized for a phone in a thick case that commercial clamps refuse.Xbox Elite Series 2 controller display standReady-made, opens free. A display stand for the Xbox Elite Series 2 controller that shows off its rubberised grips and paddles while keeping it within reach of the console.Wingspan board game card and token insertReady-made, opens free. A drop-in insert for the Stonemaier Wingspan base box (interior about 292 x 218 x 65 mm) that holds the 170 sleeved bird cards, bonus cards, food tokens, egg…LEGO minifig wall bar for 36 figuresReady-made, opens free. A 300 mm bar with 36 studs in two rows that hangs minifigs by the legs.AYANEO KUN travel standReady-made, opens free. A folding stand that holds an AYANEO KUN at 50 degrees with a 14 mm USB-C slot, two pieces on a 6 mm pin.Magnetic miniature movement trayReady-made, opens free. A movement tray lets you slide a whole unit of miniatures across the board in one motion.