Xbox Elite Series 2 controller display stand
A display stand for the Xbox Elite Series 2 controller that shows off its rubberised grips and paddles while keeping it within reach of the console. The controller is roughly 153 x 109 x 61 mm, so the stand cradles the two grips in 32 mm wide pockets set 92 mm apart and leans the controller back 30 degrees against a padded rest. A 15 x 8 mm cutout under the front edge clears the bundled charging dock's USB-C lead, or you can drop the Series 2 charging puck into a 40 x 40 mm recess so the controller charges as it sits. Print it on its base with 2 mm walls and a chamfered front for a clean look.
Most generic controller stands ignore the Elite's rear paddles and scuff them. In SpeakCAD you spell out the paddle clearance and dock recess, preview the stand in the browser without charge, refine it in the chat and download the STL.
Design an Xbox Elite Series 2 controller stand 165 x 95 x 55 mm with two 32 mm wide grip pockets spaced 92 mm apart, a 30 degree padded back rest with 20 mm paddle clearance, a 40 x 40 x 6 mm recess for the charging dock, a 15 x 8 mm cable cutout and 2 mm walls.