1
Hobby & gaming
MTG Commander deck box for 100 sleeved cards
A hinged deck box sized for a full 100-card Magic: The Gathering Commander deck in double sleeves. A sleeved card is 66 x 91 mm and 100 double-sleeved cards stack about 80 mm thick, so the interior is 68 x 93 x 84 mm with a 2 mm shelf at the bottom that lets you lift the stack out with a thumb. The lid has a 40 x 75 mm recessed pocket for the commander card in a toploader and closes on two 6 x 3 mm magnets. Walls are 2 mm, the hinge uses a 3 mm pin printed in place, and the box prints on its base in a single job with the lid open. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| interior width | 68 mm |
| interior depth | 93 mm |
| interior height (box body, below lid) | 84 mm |
| wall thickness | 2 mm |
| lift shelf height | 2 mm |
| how far shelf floor is inset from front wall | 6 mm |
| lid wall height (covers top opening) | 12 mm |
| outer radius of hinge knuckle | 5 mm |
Example prompt
Model a hinged Commander deck box with an interior 68 x 93 x 84 mm for 100 double-sleeved MTG cards, 2 mm walls, a 2 mm lift shelf, a 40 x 75 x 3 mm toploader recess in the lid, two 6 x 3 mm magnet pockets and a print-in-place hinge with a 3 mm pin.
Fit notes
Retail boxes give you generic sizes; a generated one matches your sleeves. In SpeakCAD you say single or double sleeves, whether you play with a Pokémon TCG or Lorcana deck instead, or want a dice pocket, preview the box in the browser, refine in the chat and download the STL.
Questions people ask about an MTG Commander deck box for 100 sleeved cards
A hinged deck box sized for a full 100-card Magic: The Gathering Commander deck in double sleeves. A sleeved card is 66 x 91 mm and 100 double-sleeved cards stack about 80 mm thick, so the interior is 68 x 93 x 84 mm with a 2 mm shelf at the bottom that lets you lift the stack out with a thumb. The lid has a 40 x 75 mm recessed pocket for the commander card in a toploader and closes on two 6 x 3 mm magnets. Walls are 2 mm, the hinge uses a 3 mm pin printed in place, and the box prints on its base in a single job with the lid open.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
Squishmallow display shelf 20 cmReady-made, opens free. A 200 mm shelf with a 25 mm lip that keeps a medium Squishmallow from rolling off.Lenovo Legion Go 2 kickstand extensionReady-made, opens free. An extension that adds 20 mm to a Legion Go 2 kickstand so the screen sits at 60 degrees on a couch.Round miniature bases with slotReady-made, opens free. Slotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.Wall hook for headphones and cablesReady-made, opens free. A wall hook parks a headset or pair of studio headphones next to the desk and keeps the cable coiled below it.PS5 DualSense dual controller charging standReady-made, opens free. A twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…Hot Wheels wall display rack for carded carsReady-made, opens free. A wall rack for unopened Hot Wheels and Matchbox mainlines still on their blister cards, which measure 108 x 165 mm with the blister sticking out about 35 mm.