1
Hobby & gaming
Nintendo Switch 2 game-card display rail 24
A 280 mm rail that displays 24 Switch / Switch 2 game cards in 22 × 4 mm slots at 15 degrees. Print in two halves in PLA. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Length of each half | 140 mm |
| Rail width | 30 mm |
| Rail height | 26 mm |
| Slot width | 4 mm |
| Slot depth | 22 mm |
| Slots per half | 12 mm |
| Clearance around tongue joint | 0.3 mm |
Example prompt
Design a 280 mm card rail in two halves, 24 slots 22×4 mm at 15 degrees, 1.6 mm walls.
Fit notes
Cards in a tin hide the art. Tell SpeakCAD the count, preview the rail in the browser, then download the STL.
Questions people ask about a Nintendo Switch 2 game-card display rail 24
A 280 mm rail that displays 24 Switch / Switch 2 game cards in 22 × 4 mm slots at 15 degrees. Print in two halves in PLA.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
Strymon Iridium pedalboard riserReady-made, opens free. A 15 mm riser for an Iridium so the jacks clear a packed board, 110 × 70 mm.Desk clamp headset hangerReady-made, opens free. A headset hanger clamps to the edge of a desk and holds a gaming headset off the surface where it would otherwise gather cables and crumbs.Nintendo Switch game cartridge case for 24 cardsReady-made, opens free. A slim two-part case with a sliding lid that holds 24 Nintendo Switch game cards in a 6 by 4 grid.Gunpla HG action base adapter with 3 mm pegReady-made, opens free. A small saddle that lets High Grade Gunpla kits without a dedicated stand hole sit on a Bandai Action Base 4 or 5 arm.Nintendo Switch 2 Joy-Con charging grip standReady-made, opens free. A desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open.DJI Neo 2 pocket launch padReady-made, opens free. A 120 mm pad that gives a Neo 2 a clean launch off gravel with 8 mm lips.