1
Hobby & gaming
Warhammer 40k 32 mm round base movement tray
A skirmish movement tray that carries ten Warhammer 40,000 infantry on 32 mm round bases in two ranks of five, so a whole squad of Intercessors or Necron Warriors moves in one push. Each pocket is 32.6 mm in diameter and 3 mm deep with a 1.2 mm lip between neighbours, the tray edge has a 45 degree bevel to blend with the table, and small drainage holes under each pocket let you push a stuck base out with a paintbrush handle. A 6 x 2 mm magnet recess sits under every pocket for models with magnetised bases. Print it flat with 2 mm floor and no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| pocket diameter (fits 32mm base) | 32.6 mm |
| pocket depth | 3 mm |
| wall thickness between pockets and outer wall | 1.2 mm |
| floor thickness | 2 mm |
| push-out hole diameter | 6 mm |
| magnet diameter | 6 mm |
| magnet height | 2 mm |
| thin skin under magnet to keep floor closed | 0.4 mm |
Example prompt
Design a movement tray for ten 32 mm round Warhammer bases in two ranks of five with 32.6 mm pockets 3 mm deep, 1.2 mm walls between pockets, a 45 degree outer bevel, a 6 mm push-out hole and a 6 x 2 mm magnet recess under each pocket, and a 2 mm floor.
Fit notes
Squad sizes and base diameters change with every codex, so a fixed tray goes stale fast. In SpeakCAD you say how many models, which base size (25, 28.5, 32 or 40 mm) and how many ranks, preview the tray in the browser, and download the STL after adjusting it in the chat.
Questions people ask about a Warhammer 40k 32 mm round base movement tray
A skirmish movement tray that carries ten Warhammer 40,000 infantry on 32 mm round bases in two ranks of five, so a whole squad of Intercessors or Necron Warriors moves in one push. Each pocket is 32.6 mm in diameter and 3 mm deep with a 1.2 mm lip between neighbours, the tray edge has a 45 degree bevel to blend with the table, and small drainage holes under each pocket let you push a stuck base out with a paintbrush handle. A 6 x 2 mm magnet recess sits under every pocket for models with magnetised bases. Print it flat with 2 mm floor and no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More hobby & gaming
DualSense Edge back-paddle restReady-made, opens free. A rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.Pedaltrain Nano Plus power-supply mountReady-made, opens free. A mount that hangs a 9 V brick under a Nano Plus with two 6 mm zip-tie slots matching the rail.Model kit sprue cutter holder and parts trayReady-made, opens free. Building plastic model kits means dozens of tiny parts and a few sharp tools that roll off the bench.Nintendo Switch Joy-Con comfort grip for single controllerReady-made, opens free. A palm-filling grip that a single Joy-Con slides onto for sideways two-player sessions in Mario Kart or Smash.Citadel paint pot rack for 26 mm potsReady-made, opens free. A three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…Apple Vision Pro 2 Light Seal standReady-made, opens free. A desk stand that holds Apple Vision Pro 2 (about 200 mm wide) on its Light Seal so the displays stay off the desk.