1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Bambu Lab P1S poop-chute extension bin
This is not a fixed STL. SpeakCAD generates the bambu lab p1s poop-chute extension bin to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bambu lab p1s poop-chute extension bin is
An extension that carries P1S purge poop 80 mm further forward into a 90 × 70 × 50 mm bin so it does not pile against the door. The chute matches the stock 32 × 18 mm outlet with 0.3 mm clearance and a 15 degree drop. Print the chute and bin as two PETG parts that slot together.
The stock bucket overflows on multi-colour prints. Tell SpeakCAD how far the door is, preview the chute in the browser without paying, then download the STL.
Example prompt
Model a P1S poop extension: 32×18 mm inlet with 0.3 mm clearance, 80 mm run at 15 degrees, 90×70×50 mm bin, two PETG parts, 1.6 mm walls.
People also search
bambu p1s poop chute stlp1s purge bin 3d printbambu p1s waste chute extensionp1s poop bucket 3d model
Questions people ask about a bambu lab p1s poop-chute extension bin
An extension that carries P1S purge poop 80 mm further forward into a 90 × 70 × 50 mm bin so it does not pile against the door. The chute matches the stock 32 × 18 mm outlet with 0.3 mm clearance and a 15 degree drop. Print the chute and bin as two PETG parts that slot together.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a P1S poop extension: 32×18 mm inlet with 0.3 mm clearance, 80 mm run at 15 degrees, 90×70×50 mm bin, two PETG parts, 1.6 mm walls.
The stock bucket overflows on multi-colour prints. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Prusa MK4S print-sheet wall rackA rack that hangs three MK4S 250 × 210 mm sheets on a wall so they are not stacked on the printer.Spray can trigger handlePressing an aerosol nozzle for long paint sessions cramps your finger and gives uneven coverage.Bambu Lab A1 mini poop chute and waste binA chute and bin that catch the filament purge from a Bambu Lab A1 mini during colour changes so it does not pile up behind the machine.Dowel centre-finder set 6, 8 and 10 mmThree centre-finders that mark matching dowel holes: 6, 8 and 10 mm bodies with a 1.5 mm centre pin.F-style clamp pads 40 mmSnap-on 40 mm pads for F-style clamps that spread the load on soft wood.Milwaukee Packout Compact driver-bit caddyA caddy that drops into a Packout Compact Organizer and holds 30 impact bits on 7 mm rails so they do not rattle in the official foam.