1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Oscillating-tool depth-stop collar
This is not a fixed STL. SpeakCAD generates the oscillating-tool depth-stop collar to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a oscillating-tool depth-stop collar is
A collar that clamps on a 10 mm oscillating-tool neck and presents a 40 mm fence so plunge cuts stop at a set depth. A 4 mm slot and M3 pinch bolt lock it. Print in PETG.
Tape as a depth mark rubs off. In SpeakCAD you measure the neck, preview the collar in the browser at no cost, then download the STL.
Example prompt
Design an oscillating-tool depth collar for a 10 mm neck, 40 mm fence, 4 mm slot, M3 pinch bolt, 2 mm PETG walls.
People also search
oscillating tool depth stop stlmultitool depth collar 3d printfein depth stoposcillating tool fence 3d model
Questions people ask about a oscillating-tool depth-stop collar
A collar that clamps on a 10 mm oscillating-tool neck and presents a 40 mm fence so plunge cuts stop at a set depth. A 4 mm slot and M3 pinch bolt lock it. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an oscillating-tool depth collar for a 10 mm neck, 40 mm fence, 4 mm slot, M3 pinch bolt, 2 mm PETG walls.
Tape as a depth mark rubs off. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Tap alignment guide blockStarting a thread tap perfectly square is the difference between a usable hole and a ruined part.Makita 18V LXT drill depth stop dust collector cupA clear dust cup that slides over a masonry or wood bit on a Makita DHP484 or DHP486 18V LXT drill, sets the drilling depth and catches the debris before it…Voron Trident belt-tension gauge cardA 1.2 mm card that reads Voron Trident A/B belt tension by how far a 6 mm span deflects to printed marks at 80, 90 and 100 Hz equivalents.Helping-hands PCB vise 80 mmA small vise with 80 mm jaws and a 6 mm ball joint that holds a PCB at any angle.Pinecil V2 stand with brass-tip wellA stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips.Bosch L-BOXX 102 bit insertAn insert that holds 40 bits in an L-BOXX 102 (about 357 × 316 mm) on 7 mm rails so they replace the foam.