1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Sanding block for 93 mm 1/3 sheets
This is not a fixed STL. SpeakCAD generates the sanding block for 93 mm 1/3 sheets to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a sanding block for 93 mm 1/3 sheets is
A 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips. The face has 1 mm dust grooves. Print in PLA with 2 mm walls.
A random block leaves the grit unused at the edges. In SpeakCAD you set the sheet size, preview the block in the browser at no cost, then download the STL.
Example prompt
Design a 93×185×40 mm sanding block with 2 mm sheet clips and 1 mm dust grooves, 2 mm walls.
People also search
93mm sanding block stl1/3 sheet sanding block 3d printorbital sheet hand block93 mm sandpaper block 3d model
Questions people ask about a sanding block for 93 mm 1/3 sheets
A 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips. The face has 1 mm dust grooves. Print in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a 93×185×40 mm sanding block with 2 mm sheet clips and 1 mm dust grooves, 2 mm walls.
A random block leaves the grit unused at the edges. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Creality K1C poop deflector binA deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires.Helping-hands PCB vise 80 mmA small vise with 80 mm jaws and a 6 mm ball joint that holds a PCB at any angle.TS101 iron stand with brass wellA stand that holds a TS101 at 45 degrees with a 12 mm brass-wool well and a 14 mm USB-C slot for the cable.Steam Deck OLED microSD eject toolA tool that ejects a Steam Deck OLED microSD without a paperclip, 60 × 8 × 2 mm with a 1.2 mm tip and a 12 mm finger hole.Dowel drilling guide jigFor dowel joints the two mating holes must line up exactly, and this self-centering guide makes that repeatable.Presta valve core remover tool keychainA tiny keychain tool that unscrews the removable core from a Presta valve on Stan's, Muc-Off or Peaty's tubeless valves so you can inject sealant or clear a…