1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Pinecil V2 stand with brass-tip well
This is not a fixed STL. SpeakCAD generates the pinecil v2 stand with brass-tip well to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a pinecil v2 stand with brass-tip well is
A stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips. Print in PETG.
The iron on the bench is a burn. In SpeakCAD you add a second well, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a Pinecil V2 stand, 45 degrees, 10 mm wool well, three 8 mm tip racks, 2 mm PETG.
People also search
pinecil v2 stand stlpinecil holder 3d printpinecil v2 tip rackpine64 iron stand 3d model
Questions people ask about a pinecil v2 stand with brass-tip well
A stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Pinecil V2 stand, 45 degrees, 10 mm wool well, three 8 mm tip racks, 2 mm PETG.
The iron on the bench is a burn. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Shimano flat-mount bleed blockA block that keeps Shimano flat-mount pistons from popping out during a bleed, 22 × 10 × 8 mm.Festool Systainer3 SYS-MIDI bit insertAn insert that holds 50 bits and a Centrotec chuck in a SYS-MIDI so they replace the foam.Center finder marking gaugeA center finder lays two angled legs against the edges of a board so a pencil dropped through the middle hole scribes a line exactly down the center, whateve…Bicycle chain wear indicator checker toolA go/no-go chain checker for Shimano, SRAM and KMC chains that measures elongation over ten links (127 mm nominal).Elegoo Saturn resin vat drain stand and drip trayA tilted stand that holds the resin vat of an Elegoo Saturn 3, Saturn 2 or Saturn 8K at 60 degrees over a tray so leftover resin drains back into the bottle…Crosscut-sled runner for 19 mm mitre slotsA 19 × 10 × 400 mm runner that fits European 19 mm mitre slots with 0.1 mm side shims you snip to tune.