1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Pocket-hole plug cutter guide 9.5 mm
This is not a fixed STL. SpeakCAD generates the pocket-hole plug cutter guide 9.5 mm to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a pocket-hole plug cutter guide 9.5 mm is
A guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round. The fence is 80 × 20 × 12 mm with a 9.7 mm bore. Print in PETG.
Freehand plugs go oval. In SpeakCAD you set the cutter size, preview the guide in the browser at no cost, then download the STL.
Example prompt
Design a plug-cutter guide 80×20×12 mm with a 9.7 mm bore and a 12 mm fence, 2 mm PETG walls.
People also search
pocket hole plug guide stlkreg plug cutter jig 3d print9.5 mm plug guidepocket hole plug jig 3d model
Questions people ask about a pocket-hole plug cutter guide 9.5 mm
A guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round. The fence is 80 × 20 × 12 mm with a 9.7 mm bore. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a plug-cutter guide 80×20×12 mm with a 9.7 mm bore and a 12 mm fence, 2 mm PETG walls.
Freehand plugs go oval. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Sanding block for 93 mm 1/3 sheetsA 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips.DeWalt TOUGHSYSTEM 2.0 bit railsRails that drop into a TOUGHSYSTEM 2.0 DS150 and hold 40 bits on 7 mm slots so they replace the foam.Prusa MK4S print-sheet wall rackA rack that hangs three MK4S 250 × 210 mm sheets on a wall so they are not stacked on the printer.Spray can trigger handlePressing an aerosol nozzle for long paint sessions cramps your finger and gives uneven coverage.Bambu Lab A1 mini poop chute and waste binA chute and bin that catch the filament purge from a Bambu Lab A1 mini during colour changes so it does not pile up behind the machine.AnkerMake M5C filament runout funnelA funnel that guides a new 1.75 mm end into the M5C PTFE inlet after a runout so you do not dismantle the head.