Shelf pin drilling template, 32 mm system
Adjustable shelving needs columns of 5 mm holes at precise 32 mm spacing, and this template makes that reliable with a hand drill. It is a strip 320 x 60 x 8 mm with ten 5.2 mm holes on 32 mm centers, set 37 mm from a fence lip that registers against the panel edge, plus an indexing hole at each end so you can leapfrog down tall cabinets. Print it flat in PETG with 5 walls; a hardened steel bushing pressed into each hole extends life considerably.
Describe your hole diameter, setback and spacing to SpeakCAD and get a template that matches the hardware you already bought rather than the nearest thing found online. Need a 25 mm system or a longer strip? Ask in the same conversation. Preview is free in the browser.
Create a shelf pin drilling template 320 x 60 x 8 mm with ten 5.2 mm holes on 32 mm centers, centerline 37 mm from a 10 mm tall fence lip, a 5.2 mm indexing hole at each end 16 mm beyond the pattern.