1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
FNIRSI HS-01 iron stand
This is not a fixed STL. SpeakCAD generates the fnirsi hs-01 iron stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a fnirsi hs-01 iron stand is
A stand that parks an HS-01 at 40 degrees with a 10 mm wool well. Print in PETG.
The official stand is sold separately. In SpeakCAD you confirm HS-01, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design an HS-01 stand, 40 degrees, 10 mm wool well, 2 mm PETG.
People also search
fnirsi hs-01 stand stlhs-01 iron holder 3d printfnirsi soldering standhs-01 bench stand 3d model
Questions people ask about a fnirsi hs-01 iron stand
A stand that parks an HS-01 at 40 degrees with a 10 mm wool well. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an HS-01 stand, 40 degrees, 10 mm wool well, 2 mm PETG.
The official stand is sold separately. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
TS101 iron stand with brass wellA stand that holds a TS101 at 45 degrees with a 12 mm brass-wool well and a 14 mm USB-C slot for the cable.Bambu Lab X1C AMS PTFE guide clipA clip that holds four 4 mm PTFE tubes in a tidy arc above an X1C AMS so they do not kink at the hub.Digital caliper depth base attachmentMost digital calipers have a thin depth rod that rocks on the edge of a hole, giving inconsistent readings.Headset bearing press drift set for 1 1/8 inch steererA pair of stepped drifts that turn an M8 threaded rod, two nuts and washers into a headset bearing press for integrated and zero-stack headsets.Prusa CORE One spool-holder drybox riserA riser that lifts a Prusa CORE One side spool 40 mm so a 2 L drybox can sit under the PTFE inlet.Angle-grinder cutting stand 115 mmA stand that holds a 115 mm angle grinder at 90 degrees for chopping 20 mm tube, with a 40 mm vise and a 6 mm pin hinge.