1
Tools & jigs
Shimano SPD cleat alignment jig for cycling shoes
A jig that holds a Shimano SM-SH51 or SH56 SPD cleat at a repeatable fore-aft position and angle while you tighten the two M5 bolts (14 mm apart), so a new pair of Shimano, Specialized or Fizik MTB shoes ends up set exactly like the old one. The base is a 90 x 60 mm plate with a pocket matching the cleat outline, a sliding rule in millimetres along the shoe axis and angle marks from 0 to 10 degrees, all raised 0.6 mm so they survive shop use. Print it flat in PETG. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| long axis (X) | 90 mm |
| short axis (Y) | 60 mm |
| thickness | 5 mm |
| slot width (bolt clearance) | 6 mm |
| slot length (adjustment travel), along X | 10 mm |
| raised height for scale ticks & text | 0.6 |
Example prompt
Design a cleat alignment jig plate 90 x 60 x 5 mm with a pocket for a two-bolt SPD cleat 0.3 mm oversize, bolt slots on 14 mm centres, a raised millimetre scale along the long axis and angle marks from 0 to 10 degrees, 0.6 mm raised text.
Fit notes
Cleat position is personal and knee-critical, and a downloaded jig cannot know your measured offset. Give SpeakCAD your cleat model and the fore-aft and angle numbers from your bike fit, preview the jig in the browser, refine the pocket in the chat, then download the STL.
Questions people ask about a Shimano SPD cleat alignment jig for cycling shoes
A jig that holds a Shimano SM-SH51 or SH56 SPD cleat at a repeatable fore-aft position and angle while you tighten the two M5 bolts (14 mm apart), so a new pair of Shimano, Specialized or Fizik MTB shoes ends up set exactly like the old one. The base is a 90 x 60 mm plate with a pocket matching the cleat outline, a sliding rule in millimetres along the shoe axis and angle marks from 0 to 10 degrees, all raised 0.6 mm so they survive shop use. Print it flat in PETG.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More tools & jigs
Bambu Lab build plate scraper handle with replaceable bladeReady-made, opens free. A comfortable scraper for lifting stubborn prints off a Bambu Lab X1C, P1S or A1 textured PEI plate, using a standard 100 mm plastic paint scraper blade or a…Elegoo Centauri Carbon purge bucketReady-made, opens free. A 110 × 70 × 50 mm bucket that clips onto the Centauri Carbon's right rail and catches purge before it hits the carbon-fibre bed.Soldering fume-arm 50 mm hose clampReady-made, opens free. A bench clamp that holds a 50 mm extractor hose 200 mm above a soldering iron rest.Shimano flat-mount bleed blockReady-made, opens free. A block that keeps Shimano flat-mount pistons from popping out during a bleed, 22 × 10 × 8 mm.Soldering helping hands baseReady-made, opens free. A weighted base with sockets for flexible gooseneck arms keeps small boards and wires positioned while you solder.Glue bottle stand with roller applicator holderReady-made, opens free. Wood glue bottles stored upright form a crust in the nozzle, while a bottle stored tip-down dispenses instantly.