1
Tools & jigs
Soldering fume-arm 50 mm hose clamp
A bench clamp that holds a 50 mm extractor hose 200 mm above a soldering iron rest. The clamp grabs 15–30 mm benches with an M6 screw; the hose ring is a 52 mm snap. Print in PETG. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| PETG wall thickness | 2 mm |
| max bench thickness clamp opens to | 30 mm |
| how far the clamp jaw reaches over the bench | 40 mm |
| width of the clamp body (Y direction) | 30 mm |
| riser height | 200 mm |
| riser outer diameter | 22 mm |
| hose snap ID | 52 mm |
| M6 clearance hole | 6.4 mm |
| M6 nut flat-to-flat ~10, use across-corners ~11.5 | 11.5 mm |
Example prompt
Create a fume-arm clamp for 15–30 mm benches, 52 mm hose snap, 200 mm riser, M6 screw, 2 mm PETG walls.
Fit notes
A desktop extractor is huge for one iron. In SpeakCAD you set the hose size, preview the clamp in the browser, then download the STL.
Questions people ask about a soldering fume-arm 50 mm hose clamp
A bench clamp that holds a 50 mm extractor hose 200 mm above a soldering iron rest. The clamp grabs 15–30 mm benches with an M6 screw; the hose ring is a 52 mm snap. Print in PETG.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More tools & jigs
TS101 iron stand with brass wellReady-made, opens free. A stand that holds a TS101 at 45 degrees with a 12 mm brass-wool well and a 14 mm USB-C slot for the cable.Tap alignment guide blockReady-made, opens free. Starting a thread tap perfectly square is the difference between a usable hole and a ruined part.Shimano SPD cleat alignment jig for cycling shoesReady-made, opens free. A jig that holds a Shimano SM-SH51 or SH56 SPD cleat at a repeatable fore-aft position and angle while you tighten the two M5 bolts (14 mm apart), so a new p…Elegoo Saturn resin vat drain stand and drip trayReady-made, opens free. A tilted stand that holds the resin vat of an Elegoo Saturn 3, Saturn 2 or Saturn 8K at 60 degrees over a tray so leftover resin drains back into the bottle…AnkerMake M5C filament runout funnelReady-made, opens free. A funnel that guides a new 1.75 mm end into the M5C PTFE inlet after a runout so you do not dismantle the head.Utility-knife blade disposal tinReady-made, opens free. A 70 × 40 × 20 mm tin with a 2 mm one-way slot that swallows snap-off and trapezoid blades and does not give them back.