1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Prusa CORE One spool-holder drybox riser
This is not a fixed STL. SpeakCAD generates the prusa core one spool-holder drybox riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a prusa core one spool-holder drybox riser is
A riser that lifts a Prusa CORE One side spool 40 mm so a 2 L drybox can sit under the PTFE inlet. The plate is 80 × 60 × 40 mm with the official 6 mm pin pattern and a 4.2 mm PTFE bore through the top. Print in PETG with 2 mm walls.
The stock holder leaves no room for a box. Describe the drybox height in SpeakCAD, preview the riser in the browser at no cost, then download the STL.
Example prompt
Design a CORE One spool riser 80×60×40 mm with the official 6 mm pin pattern, a 4.2 mm PTFE bore and 2 mm PETG walls.
People also search
prusa core one spool riser stlcore one drybox holder 3d printprusa core one filament risercore one spool stand 3d model
Questions people ask about a prusa core one spool-holder drybox riser
A riser that lifts a Prusa CORE One side spool 40 mm so a 2 L drybox can sit under the PTFE inlet. The plate is 80 × 60 × 40 mm with the official 6 mm pin pattern and a 4.2 mm PTFE bore through the top. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a CORE One spool riser 80×60×40 mm with the official 6 mm pin pattern, a 4.2 mm PTFE bore and 2 mm PETG walls.
The stock holder leaves no room for a box. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Tap alignment guide blockStarting a thread tap perfectly square is the difference between a usable hole and a ruined part.Makita 18V LXT drill depth stop dust collector cupA clear dust cup that slides over a masonry or wood bit on a Makita DHP484 or DHP486 18V LXT drill, sets the drilling depth and catches the debris before it…Creality K1C poop deflector binA deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires.Helping-hands PCB vise 80 mmA small vise with 80 mm jaws and a 6 mm ball joint that holds a PCB at any angle.Pinecil V2 stand with brass-tip wellA stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips.Bosch L-BOXX 102 bit insertAn insert that holds 40 bits in an L-BOXX 102 (about 357 × 316 mm) on 7 mm rails so they replace the foam.