1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Angle-grinder cutting stand 115 mm
This is not a fixed STL. SpeakCAD generates the angle-grinder cutting stand 115 mm to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a angle-grinder cutting stand 115 mm is
A stand that holds a 115 mm angle grinder at 90 degrees for chopping 20 mm tube, with a 40 mm vise and a 6 mm pin hinge. Print the base and arm in PETG; the guard stays on the tool.
A chop saw is overkill for one tube. Describe the grinder in SpeakCAD, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a 115 mm grinder stand with a 40 mm vise, 6 mm hinge, 90 degree stop and 2.4 mm PETG walls. Guard remains on the tool.
People also search
angle grinder stand stl115mm grinder chop stand 3d printmini chop saw grinder jigangle grinder cutting jig 3d model
Questions people ask about a angle-grinder cutting stand 115 mm
A stand that holds a 115 mm angle grinder at 90 degrees for chopping 20 mm tube, with a 40 mm vise and a 6 mm pin hinge. Print the base and arm in PETG; the guard stays on the tool.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a 115 mm grinder stand with a 40 mm vise, 6 mm hinge, 90 degree stop and 2.4 mm PETG walls. Guard remains on the tool.
A chop saw is overkill for one tube. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Festool Systainer3 SYS-MIDI bit insertAn insert that holds 50 bits and a Centrotec chuck in a SYS-MIDI so they replace the foam.Center finder marking gaugeA center finder lays two angled legs against the edges of a board so a pencil dropped through the middle hole scribes a line exactly down the center, whateve…Bicycle chain wear indicator checker toolA go/no-go chain checker for Shimano, SRAM and KMC chains that measures elongation over ten links (127 mm nominal).Elegoo Saturn resin vat drain stand and drip trayA tilted stand that holds the resin vat of an Elegoo Saturn 3, Saturn 2 or Saturn 8K at 60 degrees over a tray so leftover resin drains back into the bottle…Crosscut-sled runner for 19 mm mitre slotsA 19 × 10 × 400 mm runner that fits European 19 mm mitre slots with 0.1 mm side shims you snip to tune.Sanding block for 93 mm 1/3 sheetsA 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips.