1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Voron Trident belt-tension gauge card
This is not a fixed STL. SpeakCAD generates the voron trident belt-tension gauge card to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a voron trident belt-tension gauge card is
A 1.2 mm card that reads Voron Trident A/B belt tension by how far a 6 mm span deflects to printed marks at 80, 90 and 100 Hz equivalents. The card is 80 × 25 mm with a 6 mm window and 0.4 mm tick marks. Print in PLA at 0.12 mm layers.
A phone-app reading varies with room noise. Tell SpeakCAD which belt width you run, preview the card in the browser for free, then download the STL.
Example prompt
Create a Voron Trident tension card 80×25×1.2 mm with a 6 mm window and tick marks at 10, 14 and 18 mm deflection, 0.12 mm detail.
People also search
voron trident belt gauge stlvoron belt tension card 3d printtrident belt toolvoron tension gauge 3d model
Questions people ask about a voron trident belt-tension gauge card
A 1.2 mm card that reads Voron Trident A/B belt tension by how far a 6 mm span deflects to printed marks at 80, 90 and 100 Hz equivalents. The card is 80 × 25 mm with a 6 mm window and 0.4 mm tick marks. Print in PLA at 0.12 mm layers.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Voron Trident tension card 80×25×1.2 mm with a 6 mm window and tick marks at 10, 14 and 18 mm deflection, 0.12 mm detail.
A phone-app reading varies with room noise. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Bladed spoke holder tool for wheel truingAero spokes such as Sapim CX-Ray (2.2 x 0.9 mm) and DT Aerolite twist when you turn the nipple, so a holder is essential during wheel building and truing.Fairphone 5 modular repair standA bench stand that holds a Fairphone 5 (about 162 × 76 × 9.6 mm) face-down at 20 degrees so you can swap the battery, cameras or USB-C port without the phone…20 mm bench dog for Festool MFTA 20 mm bench dog 25 mm tall with a 0.1 mm taper so it drops into an MFT/3 hole and a 6 mm through-hole for a hold-down.Shimano flat-mount bleed blockA block that keeps Shimano flat-mount pistons from popping out during a bleed, 22 × 10 × 8 mm.Makita MAKPAC Type 1 bit caddyA caddy that fills a MAKPAC Type 1 (about 395 × 295 × 70 mm) with 40 impact bits on 7 mm rails.Pocket-hole drilling jig blockThis jig guides a stepped 9.5 mm pocket-hole bit at the standard 15 degree angle into the edge of 18 mm sheet goods, for pocket-screw cabinet joints without…