1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Creality K1C poop deflector bin
This is not a fixed STL. SpeakCAD generates the creality k1c poop deflector bin to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a creality k1c poop deflector bin is
A deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires. The chute matches the stock 28 × 16 mm outlet with 0.3 mm clearance. Print chute and bin in PETG.
Stock K1C poop lands on the loom. In SpeakCAD you measure the outlet, preview the chute in the browser at no cost, then download the STL.
Example prompt
Design a K1C poop deflector: 28×16 mm inlet with 0.3 mm clearance, 70 mm chute, 100×60×45 mm bin, two PETG parts, 1.6 mm walls.
People also search
creality k1c poop chute stlk1c purge bin 3d printk1c waste deflectorcreality k1c poop bucket 3d model
Questions people ask about a creality k1c poop deflector bin
A deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires. The chute matches the stock 28 × 16 mm outlet with 0.3 mm clearance. Print chute and bin in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a K1C poop deflector: 28×16 mm inlet with 0.3 mm clearance, 70 mm chute, 100×60×45 mm bin, two PETG parts, 1.6 mm walls.
Stock K1C poop lands on the loom. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Drill depth-stop collar setA drill depth-stop collar slides onto a twist bit and stops the chuck from driving deeper than you want, so dowel holes, hinge cups and pilot holes all end a…Glue bottle stand with roller applicator holderWood glue bottles stored upright form a crust in the nozzle, while a bottle stored tip-down dispenses instantly.Prusa MK4 filament runout guide with PTFE fittingA guide arm that bolts to the top of the Prusa MK4 or MK3.9 frame and routes filament from the spool holder into the Nextruder through a short length of PTFE…Pocket-hole plug cutter guide 9.5 mmA guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round.Pipe-clamp jaw pads for 3/4 inch pipeJaw pads that slip over 3/4 inch pipe-clamp heads, 50 × 30 mm faces with 1 mm TPU.Milwaukee Packout M18 battery railA rail that mounts four M18 batteries on the side of a Packout rolling box so spares are not in a tote.