1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
20 mm bench dog for Festool MFT
This is not a fixed STL. SpeakCAD generates the 20 mm bench dog for festool mft to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a 20 mm bench dog for festool mft is
A 20 mm bench dog 25 mm tall with a 0.1 mm taper so it drops into an MFT/3 hole and a 6 mm through-hole for a hold-down. Print six in PETG.
Wooden dogs swell and stick. In SpeakCAD you set the height, preview the dog in the browser without paying, then download the STL.
Example prompt
Model a 20 mm MFT bench dog 25 mm tall with a 0.1 mm taper and a 6 mm through-hole, PETG, print six.
People also search
festool mft bench dog stl20mm bench dog 3d printmft 3 dog20 mm festool dog 3d model
Questions people ask about a 20 mm bench dog for festool mft
A 20 mm bench dog 25 mm tall with a 0.1 mm taper so it drops into an MFT/3 hole and a 6 mm through-hole for a hold-down. Print six in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a 20 mm MFT bench dog 25 mm tall with a 0.1 mm taper and a 6 mm through-hole, PETG, print six.
Wooden dogs swell and stick. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Tap alignment guide blockStarting a thread tap perfectly square is the difference between a usable hole and a ruined part.Makita 18V LXT drill depth stop dust collector cupA clear dust cup that slides over a masonry or wood bit on a Makita DHP484 or DHP486 18V LXT drill, sets the drilling depth and catches the debris before it…Voron Trident belt-tension gauge cardA 1.2 mm card that reads Voron Trident A/B belt tension by how far a 6 mm span deflects to printed marks at 80, 90 and 100 Hz equivalents.Helping-hands PCB vise 80 mmA small vise with 80 mm jaws and a 6 mm ball joint that holds a PCB at any angle.Pinecil V2 stand with brass-tip wellA stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips.Bosch L-BOXX 102 bit insertAn insert that holds 40 bits in an L-BOXX 102 (about 357 × 316 mm) on 7 mm rails so they replace the foam.