1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
AnkerMake M5C filament runout funnel
This is not a fixed STL. SpeakCAD generates the ankermake m5c filament runout funnel to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ankermake m5c filament runout funnel is
A funnel that guides a new 1.75 mm end into the M5C PTFE inlet after a runout so you do not dismantle the head. The mouth is 12 mm, the exit is 4.2 mm, and a 8 mm clip grabs the stock bowden coupling. Print in PETG.
Threading a warm M5C by eye burns fingers. Tell SpeakCAD the coupling size, preview the funnel in the browser at no cost, then download the STL.
Example prompt
Design an M5C runout funnel 30 mm tall, 12 mm mouth, 4.2 mm exit, 8 mm clip for the bowden coupling, 1.6 mm PETG.
People also search
ankermake m5c funnel stlm5c filament guide 3d printankermake m5c runout helperm5c ptfe funnel 3d model
Questions people ask about a ankermake m5c filament runout funnel
A funnel that guides a new 1.75 mm end into the M5C PTFE inlet after a runout so you do not dismantle the head. The mouth is 12 mm, the exit is 4.2 mm, and a 8 mm clip grabs the stock bowden coupling. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an M5C runout funnel 30 mm tall, 12 mm mouth, 4.2 mm exit, 8 mm clip for the bowden coupling, 1.6 mm PETG.
Threading a warm M5C by eye burns fingers. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Glue bottle stand with roller applicator holderWood glue bottles stored upright form a crust in the nozzle, while a bottle stored tip-down dispenses instantly.Prusa MK4 filament runout guide with PTFE fittingA guide arm that bolts to the top of the Prusa MK4 or MK3.9 frame and routes filament from the spool holder into the Nextruder through a short length of PTFE…Pocket-hole plug cutter guide 9.5 mmA guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round.Pipe-clamp jaw pads for 3/4 inch pipeJaw pads that slip over 3/4 inch pipe-clamp heads, 50 × 30 mm faces with 1 mm TPU.Milwaukee Packout M18 battery railA rail that mounts four M18 batteries on the side of a Packout rolling box so spares are not in a tote.Bambu Lab H2D AMS HT spool restA rest that parks an AMS HT spool (about 200 mm) beside an H2D so a fifth material is not on the floor.