1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Tools & jigs
Elegoo Centauri Carbon purge bucket
This is not a fixed STL. SpeakCAD generates the elegoo centauri carbon purge bucket to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a elegoo centauri carbon purge bucket is
A 110 × 70 × 50 mm bucket that clips onto the Centauri Carbon's right rail and catches purge before it hits the carbon-fibre bed. The clip is a 20 mm snap with 0.3 mm clearance on the rail. Print in PETG with 1.6 mm walls.
Purge on a CF plate is a nightmare to scrape. In SpeakCAD you measure the rail, preview the bucket in the browser for free, then download the STL.
Example prompt
Create a Centauri Carbon purge bucket 110×70×50 mm with a 20 mm rail snap and 0.3 mm clearance, 1.6 mm PETG walls.
People also search
centauri carbon purge bucket stlelegoo centauri carbon poop bin 3d printcentauri carbon waste bucketelegoo centauri purge holder 3d model
Questions people ask about a elegoo centauri carbon purge bucket
A 110 × 70 × 50 mm bucket that clips onto the Centauri Carbon's right rail and catches purge before it hits the carbon-fibre bed. The clip is a 20 mm snap with 0.3 mm clearance on the rail. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Centauri Carbon purge bucket 110×70×50 mm with a 20 mm rail snap and 0.3 mm clearance, 1.6 mm PETG walls.
Purge on a CF plate is a nightmare to scrape. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More tools & jigs
Pocket-hole plug cutter guide 9.5 mmA guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round.Pipe-clamp jaw pads for 3/4 inch pipeJaw pads that slip over 3/4 inch pipe-clamp heads, 50 × 30 mm faces with 1 mm TPU.Milwaukee Packout M18 battery railA rail that mounts four M18 batteries on the side of a Packout rolling box so spares are not in a tote.Bambu Lab H2D AMS HT spool restA rest that parks an AMS HT spool (about 200 mm) beside an H2D so a fifth material is not on the floor.Hex bit holder with magnet trayA compact holder keeps 1/4 inch hex screwdriver bits sorted by type and within reach on the bench.Tesla Model 3 Aero wheel hub cap removal toolA hooked lever that pops the 18 inch Aero wheel covers off a Tesla Model 3 without gouging the alloy underneath.