Biblioteca

Peças que as pessoas geram com o SpeakCAD

1015 peças do dia a dia imprimíveis em 3D, cada uma com as dimensões que importam e um pedido que você pode colar. Nada aqui é um arquivo fixo: descreva as suas medidas e o modelo é construído para você, no seu navegador.

Organizers & storage 115 Brackets & mounts 150 Enclosures & cases 53 Adapters & couplers 78 Desk & office 154 Kitchen & home 81 Tools & jigs 82 Replacement parts 85 Hobby & gaming 80 Garden & outdoor 38 Bike, car, pets, bathroom & travel 99

Organizers & storage

Drawer inserts, bins, trays and holders that fit a measured space.

21700 battery storage tray for 8 cells with polarity marksA desktop tray that keeps eight 21700 lithium cells upright and separated, handy for vape, torch, power bank and e-bike battery projects.

25 mm French-cleat safety-glasses bin, 3D printable part

25 mm French-cleat safety-glasses binA 120 × 80 × 60 mm bin on a 25 mm French cleat that holds two pairs of safety glasses and a pack of earplugs.

AA and AAA battery storage box with lid, 3D printable part

AA and AAA battery storage box with lidA two-level case that stores fresh cells in rows and keeps the used ones separate.

Anker Nano charger and cable desk organizer trayA tray that keeps two Anker Nano GaN chargers and their USB-C cables together on a desk or in a travel drawer.

Apple Pencil Pro desk tray with USB-C adapter pocketA desk tray that stores an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across) in a half-round groove, with a second groove for the shorter Apple…

Apple TV Siri Remote 3rd-gen trayA tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions.

Apple TV, Roku and Fire TV remote holderA sofa-side caddy with three angled slots sized to the remotes that come with streaming boxes.

Apple USB-C and Lightning cable clip for desk edgeA clip that fixes to the edge of a desk and parks Apple charging cables by the connector, so the USB-C to USB-C woven cable (about 3.5 mm across) and the old…

Apple Watch band organizer drawer insert with lug railsA drawer insert with a row of rails that copy the Apple Watch case slot, so Sport, Solo Loop and Braided bands for 42, 44, 45, 46 and 49 mm watches slide on…

Bambu Lab AMS desiccant holder tray for silica beadsA vented tray that clips into the unused floor space at the front of the Bambu Lab AMS, between the spool rollers, and holds about 60 g of loose silica gel b…

Bambu Lab H2D build-plate wall rack, 3D printable part

Bambu Lab H2D build-plate wall rackA wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch.

Bosch Click & Go rail hookA hook that snaps onto a Bosch Click & Go rail and holds a tape or knife.

Bosch L-Boxx 136 insert for GSR 12V drill kitA replacement inlay for the Bosch Professional L-Boxx 136 (Sortimo L-BOXX 136) that cradles a GSR 12V-35 drill, two GBA 12V batteries, the GAL 12V charger an…

Bosch L-BOXX 238 jigsaw-blade insertAn insert for an L-BOXX 238 that holds a GST 18V, 20 T-shank blades in 1.5 mm slots, and a splinter guard pack.

Bose QC Ultra 2 travel case insert, 3D printable part

Bose QC Ultra 2 travel case insertA drop-in insert that turns a generic hard case into a Bose QC Ultra 2 (about 170 × 170 × 80 mm folded) nest with a 40 × 20 mm well for the USB-C cable and a…

Boss pedal patch cable and 9V power lead organizer, 3D printable part

Boss pedal patch cable and 9V power lead organizerA gig-bag tray that keeps the small stuff behind a pedalboard sorted: 15 cm patch cables, 5.5 x 2.1 mm 9 V daisy-chain leads for Boss and Strymon pedals, spa…

Canon LP-E6 battery holder with SD card slots, 3D printable part

Canon LP-E6 battery holder with SD card slotsA camera-bag organizer that carries three Canon LP-E6, LP-E6N or LP-E6NH batteries, the 38.4 x 21 x 56.8 mm pack shared by the EOS R6, R6 Mark II, R5 and 5D…

Charging cable organizer with wrap posts, 3D printable part

Charging cable organizer with wrap postsA flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…

DeWalt ToughSystem drill bit index insert 1 to 13 mmA stepped drill bit index that drops into the small removable cup of a DeWalt ToughSystem 2.0 organizer (DWST08020) and holds a full metric set from 1 to 13…

DeWalt TSTAK deep-box divider setDividers that split a TSTAK deep box into four 150 × 140 mm wells for fittings.

DeWalt TSTAK VI oscillating-tool insert, 3D printable part

DeWalt TSTAK VI oscillating-tool insertAn insert for a TSTAK VI deep box that holds a DCS356, eight blades in 2 mm slots, and the charger.

DJI Mini 4 Pro ND filter case with six slotsA pocket case for the snap-on ND filters used by the DJI Mini 4 Pro and Mini 3 Pro, which measure roughly 25 x 24 mm and 8 mm deep including the clip and are…

Dr. Brown's bottle vent and insert organizer trayA tray that gives the many small parts of Dr.

Dremel accessory organizer tray for 3.2 mm shank bitsA desk tray that stands 40 Dremel accessories upright by their 3.2 mm (1/8 inch) shanks so the cutting ends face you: grinding stones, cut-off wheel mandrels…

Dunlop Tortex pick dispenser box for 30 picks, 3D printable part

Dunlop Tortex pick dispenser box for 30 picksA spring-loaded dispenser that stacks 30 standard 351-shape guitar picks such as Dunlop Tortex, Jazz III XL, Fender 351 or Ernie Ball Everlast, and pushes th…

Dyson Airwrap smoothing-brush caddyA caddy that holds the firm and soft Airwrap smoothing brushes plus the flyaway attachment in labelled wells so the magnets do not click together in a drawer.

Dyson Big+Quiet Formaldehyde remote cradleA cradle that holds the larger Big+Quiet Formaldehyde remote (about 130 × 50 × 14 mm) on the top of the cylinder so it does not slide off the curved lid.

Dyson HP07 remote bedside cradleA bedside cradle for the HP07 remote so night-time oscillation changes do not mean a trip to the tower.

Dyson Purifier Cool Gen2 remote trayA tray that parks the curved Purifier Cool Gen2 remote (about 110 × 40 × 12 mm) on the tower so it stops vanishing behind the sofa.

Dyson Supersonic nozzle magnetic caddyA caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger.

Dyson Supersonic r travel-pouch insertAn insert that keeps a Supersonic r and two nozzles from grinding in the official travel pouch.

Entryway catch-all tray for keys and wallet, 3D printable part

Entryway catch-all tray for keys and walletA low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.

ESD bin label holder 60 mm, 3D printable part

ESD bin label holder 60 mmA 60 × 20 mm clip-on label holder for conductive bins with a 1.2 mm card slot and a 4 mm lip that hangs on a 2 mm bin rim.

ESP32 dev board storage rack with 10 slotsA desk rack that stores ESP32 DevKit, ESP32-C3, ESP8266 NodeMCU and Arduino Nano boards upright with their USB ports facing up so the right one is easy to grab.

Festool Domino DF 700 tenon caddyA caddy that holds DF 700 tenons (8, 10, 12, 14 mm) in labelled wells so they are not mixed with DF 500 stock.

Festool Systainer insert for Domino cutters and drill bitsA foam-free insert that sits in the bottom of a Festool Systainer SYS3 M 137 and keeps Domino DF 500 cutters, spare bits and the wrench in fixed pockets.

Festool Systainer3 M 187 oscillator insert, 3D printable part

Festool Systainer3 M 187 oscillator insertA two-part insert for a Systainer3 M 187 that holds a Vecturo or OSC 18, five blades in 2 mm slots, and the charger.

Folding hex-key set wall holder, 3D printable part

Folding hex-key set wall holderA wall plate that holds two folding hex sets (metric and imperial) in 22 × 10 mm pockets with a 4.5 mm hole pair.

Framework 13 HDMI-module trayA tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag.

Framework 16 input-module trayA tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.

Framework Laptop 16 GPU module storage tray, 3D printable part

Framework Laptop 16 GPU module storage trayA padded tray that stores a Framework 16 GPU module (about 150 × 80 × 20 mm) plus two expansion cards in labelled 32 × 14 mm slots.

Fujifilm X100VI 49 mm filter and lens cap holderA desk or bag organizer for the small kit that the Fujifilm X100VI and X100V accumulate: the AR-X100 adapter ring, two or three 49 mm filters and the slip-on…

Glasses stand for several pairs of spectacles, 3D printable part

Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.

Grease-gun coupler wall holder, 3D printable part

Grease-gun coupler wall holderA wall hook that parks a grease-gun coupler and a spare Zerk cap, 20 mm saddle and a 8 mm cap well.

Gridfinity 1×1 bin for SD, microSD and CFexpress, 3D printable part

Gridfinity 1×1 bin for SD, microSD and CFexpressA 1×1 Gridfinity bin (42 × 42 mm, 3U) with a 33 × 24 × 3 mm SD slot, two 16 × 12 × 1.2 mm microSD slots and a 30 × 21 × 4 mm CFexpress Type B well.

Gridfinity 2×1 bin for Leatherman Wave Plus, 3D printable part

Gridfinity 2×1 bin for Leatherman Wave PlusA 2×1 Gridfinity bin (84 × 42 mm, 6U) with a 105 × 18 × 18 mm well that a Wave Plus drops into closed, plus a 12 mm slot for a bit kit.

Gridfinity 5×4 magnet-only baseplate, 3D printable part

Gridfinity 5×4 magnet-only baseplateA 5 by 4 Gridfinity baseplate (210 × 168 mm) with 6 × 2 mm magnet pockets and no screw holes, for a drawer that cannot be drilled.

Gridfinity bin for Wera Kraftform screwdriver setA 3 by 1 Gridfinity bin, 126 by 42 mm on the standard 42 mm grid, that holds six Wera Kraftform Plus screwdrivers upright by the blade so the handles fan out…

Gridfinity holder for Knipex Pliers Wrench and CobraA 2 by 2 Gridfinity block, 84 by 84 mm, with four angled slots that hold a Knipex Pliers Wrench 180 and 250 and Cobra 180 and 250 jaws-down so the handles le…

Hair tie and claw clip organizer stand, 3D printable part

Hair tie and claw clip organizer standA bathroom counter stand with a vertical 25 mm post for stacking elastic hair ties, a slotted rail that grips claw clips by their hinges, and a small cup for…

Hex key holder rack for bike workshop toolsA bench or pegboard rack that holds the hex keys, Torx keys and a Park Tool chain tool that every home bike mechanic reaches for: seven graduated hex slots f…

IKEA Alex drawer insert tray for pens and toolsA modular tray that sits in the shallow top drawer of an IKEA Alex unit and gives pens, markers, USB sticks and small tools their own compartments.

IKEA ALEX drawer pencil-well insertA shallow insert that sits in an ALEX drawer (about 264 mm internal on the 36 cm unit) with twelve 10 mm pencil wells and a 80 × 40 mm eraser tray.

IKEA BILLY extra-shelf book stopA stop that keeps paperbacks from sliding off a BILLY extra shelf (26 cm deep) when the case is on carpet.

IKEA BROR pegboard hook adapterAn adapter that lets a 6 mm pegboard hook sit in the BROR side-panel holes (about 10 mm) so you can hang tools on the trolley.

IKEA BROR shelf end-stop pairA pair of end stops that keep bins from sliding off a BROR shelf (about 85 or 110 cm) when you roll the unit.

IKEA IVAR side hook-rail clipA clip that hangs a hook rail from an IVAR side upright (about 42 mm) so bags live on the side, not the aisle.

IKEA Kallax insert divider for 33 cm cubesA cross-shaped divider that slots into a single Kallax cube and splits the 33 by 33 cm opening into four compartments for scarves, yarn, cables or toys.

IKEA MALM bed under-bin stop clipA clip that stops MALM under-bed drawers (about 100 × 20 cm) from rolling all the way out when you pull the handle.

IKEA PAX 60 cm drawer dividerA divider that splits a 60 cm PAX/KOMPLEMENT drawer (about 564 mm internal) into two 280 mm wells for folded tees.

IKEA Pax clothes rail hook for bags and beltsA hook that hangs from the Komplement clothes rail inside an IKEA Pax wardrobe and holds handbags, belts, ties or a laundry bag without taking a hanger slot.

IKEA PAX KOMPLEMENT 50 cm tray dividerA divider that splits a 50 cm KOMPLEMENT pull-out tray (about 464 mm internal) for belts and ties.

IKEA SKÅDIS 6 mm cable-hook pairA pair of SKÅDIS hooks that park 6 mm USB-C or IEC cables in a 8 mm saddle so they do not knot behind the board.

IKEA SKÅDIS 65 mm spray-can holderA SKÅDIS peg that holds a 65 mm spray can (paint, dry lube, contact cleaner) so it is not on the bench.

IKEA SKÅDIS holder for Festool Domino tenons, 3D printable part

IKEA SKÅDIS holder for Festool Domino tenonsA SKÅDIS box that holds Domino tenons in four labelled wells (4, 5, 6, 8 / 10 mm) with a 5 mm hook pair.

IKEA SKÅDIS holder for Makita impact bits, 3D printable part

IKEA SKÅDIS holder for Makita impact bitsA SKÅDIS pegboard plate with 15 hex pockets 6.6 mm across and two 5 mm SKÅDIS hooks on 40 mm centres.

IKEA SMÅSTAD wardrobe rail hookA hook that hangs backpacks from a SMÅSTAD clothes rail (about 16 mm) so they are not on the floor of the wardrobe.

IKEA TROFAST bin-lid clip pairA pair of clips that keep a TROFAST bin lid (about 42 × 30 cm) from sliding off in a car or under a bed.

IKEA TROFAST label-holder clipA clip that hangs a 70 × 25 mm label on the front of a TROFAST bin so kids can find Lego without opening every drawer.

iPad and iPhone family charging station rack with cable slotsA countertop rack with upright slots for two iPads and three iPhones, so the family devices charge in one place overnight.

Jewelry tray with ring bars and earring holes, 3D printable part

Jewelry tray with ring bars and earring holesA dresser tray combining a ring bar section, a grid of 1.5 mm holes for stud earrings, and a shallow well for bracelets and necklaces.

Keychron K2 HE travel-case insertAn insert that keeps a K2 HE (about 315 × 128 × 40 mm) from sliding in a sleeve, with a 317 × 130 mm well and a 20 mm cable trough.

KitchenAid attachment holder rack for pasta roller and grinderA rack that stores KitchenAid power hub attachments upright by their drive shafts so the pasta roller, fettuccine cutter and food grinder stop rattling loose…

KitchenAid sausage-stuffer tube rack, 3D printable part

KitchenAid sausage-stuffer tube rackA rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry.

LEGO Technic gear-tray insertA tray insert that sorts Technic gears by tooth count in labelled wells (8, 12, 16, 20, 24, 40).

Mac Studio M4 top SD-card caddyA caddy that sits on a Mac Studio M4 and holds six SD cards plus two CFexpress in labelled slots, 120 × 80 × 16 mm, rubber-foot recesses so it does not slide.

Makeup brush holder with divided cups, 3D printable part

Makeup brush holder with divided cupsA tall cup split into three sections of different heights so face brushes, eye brushes and eyeliner pencils each stand at a useful height without disappearing.

Makita MAKPAC Type 2 impact-driver insert, 3D printable part

Makita MAKPAC Type 2 impact-driver insertA Type 2 MAKPAC insert that holds an 18V LXT impact driver, a battery, and a 10-bit rail.

Makita MakPac type 2 insert for impact bit casesA shallow tray for the Makita MakPac Type 2 case (about 395 by 295 mm inside, 105 mm deep) that holds two Makita impact bit cases, a set of 1/4 inch hex nut…

Milwaukee Packout bit holder insert for 1/4 hex bitsA drop-in insert for the Milwaukee Packout Low-Profile Organizer that turns one of its removable bins into a dedicated 1/4 inch hex bit station.

Milwaukee Packout Compact Organizer bit railsTwo drop-in rails that turn a Packout Compact Organizer (48-22-8435) into a 1/4 inch hex-bit station with 20 pockets per rail, 6.6 mm hex by 12 mm deep.

Milwaukee Packout crate bottle holderA holder that drops into a Packout crate and parks a 70 mm water bottle plus a 55 mm spray can so they do not tip when you roll.

Milwaukee Packout Low-Profile Organizer dividersA set of dividers that split a Packout Low-Profile Organizer (about 380 × 250 mm) into six 120 × 80 mm wells for fittings.

Milwaukee Packout rolling-box handle hookA hook that clips onto the Packout rolling-box handle (about 30 mm) and holds a tape, knife or badge so they are not in a pocket.

Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.

Nintendo Switch 2 microSD caddyA caddy that holds eight microSD Express cards plus two game cards so they are not loose in a bag.

Philips Sonicare brush head stand for four headsA stand that holds four Philips Sonicare brush heads upright next to the charger so each family member's head dries in the air rather than lying on the sink.

Prusa MK4 nozzle storage box for Nextruder and V6 nozzlesA hinged box that keeps Prusa Nextruder nozzles, the V6 adapter nozzles and a couple of Obxidian and high-flow nozzles sorted by size instead of loose in a bag.

Prusa MK4S ObXidian nozzle-swap caddy, 3D printable part

Prusa MK4S ObXidian nozzle-swap caddyA bench caddy that holds six MK4S / Nextruder nozzles (Cht, ObXidian, brass) in 10 mm hex pockets 12 mm deep plus a 8 mm well for the nozzle wrench.

Prusa XL toolchanger nozzle caddyA caddy that holds five XL Nextruder nozzles (0.25–0.8 mm) in labelled 8 mm wells so they are not mixed with MK4S ObXidian tips.

Raspberry Pi HAT storage rack with labelled slotsA vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.

Raspberry Pi Pico breadboard holder with jumper wire trayA baseplate that holds a half-size breadboard and a Raspberry Pi Pico side by side, with a tray for the jumper wires that otherwise end up in a knot.

RIDGID Pro Gear stack bit caddy, 3D printable part

RIDGID Pro Gear stack bit caddyA caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.

Roland SP-404MKII SD-card caddyA caddy that clips under an SP-404MKII and holds four SD cards in 33 × 3 mm slots plus a 20 mm stylus well.

SD card and USB stick desktop caddy, 3D printable part

SD card and USB stick desktop caddyA compact block with angled slots that hold SD cards, microSD adapters and USB flash drives upright so the labels face you.

SIM eject tool and nano SIM card holder keychainA keychain tag that stores a SIM eject pin and up to two spare nano SIM cards (12.3 x 8.8 x 0.67 mm) for travel, so swapping an eSIM-less iPhone 15 or Galaxy…

Small parts sorting bins with label slot, 3D printable part

Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.

Smartwatch charger cable organizer for Garmin Fitbit and WhoopA tray with three bays that keeps a Garmin four-pin clip, a Fitbit Charge 6 charging clip and a Whoop 4.0 battery pack each in its own pocket with the cable…

SMD reel holder 8, 12 and 16 mm, 3D printable part

SMD reel holder 8, 12 and 16 mmA bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges.

Sonicare DiamondClean travel-case insert, 3D printable part

Sonicare DiamondClean travel-case insertAn insert that holds a DiamondClean handle and two heads in a 180 × 50 mm hard case with 0.4 mm clearance.

Sony NP-FZ100 battery case for four batteries, 3D printable part

Sony NP-FZ100 battery case for four batteriesA pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a fl…

Sony WH-1000XM6 travel-case insertAn insert that keeps XM6 cups from grinding in the official case, with two 90 mm cup wells and a 20 mm cable trough.

SRAM AXS battery wall caddyA caddy that hangs four AXS batteries (about 40 × 20 × 15 mm) on a 4.5 mm hole pair so spares are not in a bag.

Stackable drawer organizer tray with dividers, 3D printable part

Stackable drawer organizer tray with dividersA shallow open tray that drops into a desk or kitchen drawer and splits it into compartments for pens, batteries, clips and other loose items.

Stanley and Yeti tumbler lid organizer for the cabinetA rack that stands tumbler lids on edge in a kitchen cabinet so the Stanley Quencher, Yeti Rambler and Hydro Flask lids stop sliding around and losing their…

Stepped rack for craft paint bottles, 3D printable part

Stepped rack for craft paint bottlesA tiered display that holds 2 oz craft paint bottles and dropper bottles at an angle so labels face forward.

Tesla Model 3 center console organizer tray insertA tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…

Thru-axle thread-on derailleur-hanger holderA 12 mm dummy axle that holds a spare UDH or brand hanger on the workbench so the threads do not roll into the chip tray.

Tiered nail polish display rack, 3D printable part

Tiered nail polish display rackA stadium-style shelf that stands nail polish bottles in three rising rows so every shade is visible.

Tiered thread spool rack for sewing table, 3D printable part

Tiered thread spool rack for sewing tableA stepped rack that holds sewing thread spools on angled pegs so the labels stay visible and the thread ends do not unravel into each other.

Tupperware and Pyrex lid organizer rack for the cabinetA tiered rack that stores plastic and glass container lids on edge so Tupperware, Pyrex, Rubbermaid and Sistema lids stop avalanching out of the cabinet.

Watch strap storage rack with numbered slots, 3D printable part

Watch strap storage rack with numbered slotsA rack that stores spare smartwatch or quick-release straps flat and separated so silicone and leather bands do not stick together or curl.

Weekly pill organizer with hinged lids, 3D printable part

Weekly pill organizer with hinged lidsSeven compartments, one per day, each with its own print-in-place hinged lid that snaps shut with a small catch.

Whiskas and Felix cat food pouch dispenser boxA gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead…

Wüsthof knife block insert with slotted grid for any knivesA replacement insert for a Wüsthof, Zwilling or Victorinox wooden knife block whose slots no longer match the knives you own.

Brackets & mounts

Wall brackets, clips, hooks and mounts for pipes, shelves and devices.

25 mm French-cleat cordless-drill holder, 3D printable part

25 mm French-cleat cordless-drill holderA French-cleat cradle for an 18V drill with a 50 mm handle saddle and a 20 mm battery rest, cut for a 25 mm cleat.

Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…

Air-hose reel wall guide 8 mm, 3D printable part

Air-hose reel wall guide 8 mmA wall guide that keeps an 8 mm ID air hose from rubbing the reel cheek, 40 mm ring with a 4.5 mm hole pair.

AirPods Max 2 wall hook with braided cable slot, 3D printable part

AirPods Max 2 wall hook with braided cable slotA wall hook that holds AirPods Max 2 (about 188 × 168 × 83 mm) by the headband with a 20 mm padded saddle and a 8 × 40 mm slot underneath for the braided USB…

Amazon Echo Dot 5th gen outlet shelf mountA small shelf that sits over a wall outlet and carries an Amazon Echo Dot 5th gen, a 100 mm sphere-ish speaker 89 mm tall weighing about 300 g, so it takes n…

Amazon Eero Pro 6 wall mount bracketA wall bracket for the Amazon Eero Pro 6 mesh node, a 137 x 137 x 48 mm unit whose power and Ethernet ports sit on the back.

Apple TV 4K 3rd gen HDMI shelfA 100 mm shelf that hides a 3rd-gen Apple TV 4K behind a TV with a 16 mm HDMI/power cutout and two 4.5 mm holes.

Apple TV 4K behind-TV VESA mount bracketA holder that hides an Apple TV 4K behind the television using a spare VESA screw.

Aqara Hub M3 under-shelf clipA clip that hides an Aqara Hub M3 under a 12–24 mm shelf with the USB-C facing out.

Aqara Presence Sensor FP2 45-degree corner bracket, 3D printable part

Aqara Presence Sensor FP2 45-degree corner bracketA corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room.

Bambu Lab A1 AMS Lite spool holder riser bracketA riser that lifts the Bambu Lab AMS Lite 60 mm above the desk so the four spools clear the A1 or A1 mini bed when the printer sits on a shelf, and adds feet…

Bosch 18V GDR wall holsterA holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair.

Bose SoundLink Flex 2 bike mountA mount that holds a SoundLink Flex 2 (about 90 × 51 × 201 mm) on a 22.2 or 31.8 mm handlebar so a picnic ride has a speaker.

Bracket to fit a 2.5 inch SSD in a 3.5 inch bayA rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage.

Brompton handlebar mount for Garmin Edge computersBrompton M and S bars have a 22.2 mm grip section and very little real estate once the brake levers and shifter are on, so a normal out-front mount does not…

Ceiling mount ring for a round access pointA ring-shaped mounting plate for disc-style wireless access points that ship without a suitable ceiling bracket, or whose original plate was lost.

Chuckit ball launcher wall mount with ball holderA garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.

Corner bracket for 2020 aluminium extrusionAn L-shaped joining bracket for 20 x 20 mm aluminium extrusion.

Curtain rod bracket for a 25 mm poleA replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.

DeWalt 20V Atomic compact holsterA holster that parks a 20V Atomic compact drill or impact (about 160 mm) on a 4.5 mm hole pair.

DeWalt 20V MAX battery wall rack with drop-in slotsA rail-style rack for DeWalt 20V MAX and XR batteries (also the 18V XR packs sold in Europe) that mirrors the slide-on rails of a DeWalt tool so a pack click…

DeWalt FLEXVOLT battery wall rackA rack that hangs four FLEXVOLT 60V/20V batteries (about 110 × 80 mm) on a stud so they are not mixed with 20V MAX packs.

DIN rail clip for mounting a small PCBA snap-on clip for standard 35 mm top-hat DIN rail with a flat platform for a small circuit board.

DJI Osmo Pocket 3 desk cradle with tripod thread, 3D printable part

DJI Osmo Pocket 3 desk cradle with tripod threadA weighted desk cradle for a DJI Osmo Pocket 3 (about 140 × 42 × 34 mm) with a 1/4-20 brass-insert boss underneath and a 16 mm well that the handle drops into.

Dyson Gen5detect crevice-tool clip, 3D printable part

Dyson Gen5detect crevice-tool clipA clip that holds the Gen5detect crevice tool on the wand so it does not live in the other room.

Dyson Gen5detect Fluffy head wall hookA hook that hangs the Gen5detect Fluffy soft roller (about 250 mm wide) next to the dock so the roller is not crushed in a cupboard.

Dyson Gen5detect Hair Screw holsterA holster that hangs the Gen5detect Hair Screw tool on the wall dock so pet hair is not the thing left on the floor.

Dyson HP09 remote wall clipA clip that hangs the HP09 Formaldehyde remote next to a light switch so it is not the curved thing on the floor.

Dyson V10 Animal mini-motorhead clipA clip that hangs the V10 Animal mini motorhead on the wand so pet stairs are not a two-trip job.

Dyson V10 cyclone tool railA rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor.

Dyson V11 wall dock attachment holder for 5 toolsA wall rail that stores five Dyson V11, V10 and V15 attachments beside the official dock, which only holds two.

Dyson V12 Detect crevice wand clipA clip that snaps the longer V12 Detect crevice tool onto the slim wand, 38 × 26 × 16 mm with a 30 mm tool saddle and a 34 mm wand snap.

Dyson V12 Detect Slim tool clipA clip that snaps a V12 Detect Slim crevice or combination tool onto the wand so it travels with the vacuum.

Dyson V15 Detect combination-tool clipA clip that parks the V15 Detect combination tool on the wand next to the official crevice clip so both travel together.

Dyson V15 Detect wand wall holster, 3D printable part

Dyson V15 Detect wand wall holsterA wall holster that parks a V15 Detect wand and two tools next to the official dock, which only holds one.

Dyson V8 Absolute wand wall holsterA wall holster that parks a V8 Absolute wand and three click-in tools so you are not buying Dyson's official dock.

Dyson V8 Fluffy soft-roller wall hookA hook that hangs the V8 Fluffy soft roller (about 230 mm wide) next to the V8 holster so the roller is not stored on its bristles.

Elegoo Neptune 4 build plate wall hanger rackA wall rack that stores three spare Elegoo Neptune 4 or Neptune 4 Pro flexible PEI plates (235 by 235 mm) on edge so the coating never touches another plate.

Festool CT MIDI hose wall hookA hook that parks a CT MIDI 27 mm hose in a 80 mm loop so it is not a trip on the floor.

Furbo dog camera wall mount bracketA bracket that lifts a Furbo Dog Camera or Furbo 360 off the floor and onto the wall so the treat tosser clears the sofa and curious dogs cannot knock it over.

Garmin Edge 540 low profile stem cap mountA stem cap mount replaces the top cap on a 1 1/8 inch steerer and puts a Garmin Edge 540 or 840 directly above the stem, the tidiest position for a commuter,…

Garmin Edge 840 out-front mount for 31.8 mm barsAn out-front mount that clamps a 31.8 mm road handlebar and holds a Garmin Edge 840 (or the identically sized Edge 540) level with the stem, roughly 75 mm ah…

Garmin Varia radar mount for aero seatpostThe rubber band mount supplied with the Garmin Varia RTL515 and RCT715 is designed for round posts and sits crooked on the D-shaped aero seatposts found on C…

Gillette Fusion razor wall holder with adhesive padA wall holder that grips a Gillette Fusion, ProGlide or Harry's Truman handle by its neck so the cartridge hangs in the air and dries instead of rusting on t…

Google Nest Mini wall hanger with hidden cableA hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.

Google Pixel 9 Pro XL shower phone holder suctionA splash-tolerant cradle that holds a Google Pixel 9 Pro XL (162.8 x 76.6 x 8.5 mm) on shower tiles for podcasts and playlists.

Hammerhead Karoo 2 out-front mount with GoPro undersideThe Hammerhead Karoo 2 is a big unit at 100.6 x 60.8 x 19.3 mm and needs an arm long enough to clear the stem faceplate.

Hatch Rest sound machine wall shelf with cable channelA small shelf that mounts a Hatch Rest or Rest+ sound machine on the nursery wall out of reach of a toddler while keeping the top touch ring accessible.

Hatch Restore 2 wall shelf with cable slot, 3D printable part

Hatch Restore 2 wall shelf with cable slotA 160 mm shelf that holds a Restore 2 and drops the USB-C through a 8 mm slot so the nightstand stays clear.

Hex dumbbell wall mount holder bracketA pair of wall brackets that cradle a rubber hex dumbbell by its handle so a small home gym stays off the floor.

Hidden AirTag mount under bike saddle railsA small clamshell that bolts between the two 7 mm rails under a bicycle saddle and hides an Apple AirTag (31.9 mm diameter, 8 mm thick) where a thief will no…

Home Assistant Green wall mountA wall mount that holds a Home Assistant Green with a 14 mm Ethernet cutout and two 4.5 mm holes.

HomePod mini 2 outlet shelfA shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.

Ibanez RG headstock guitar wall hanger angled, 3D printable part

Ibanez RG headstock guitar wall hanger angledA wall hanger shaped for the narrow, pointed reverse headstocks on Ibanez RG, S and JEM models, which slip out of the wide yokes made for a Fender Stratocast…

IKEA Billy bookcase anti-tip wall bracketA low-profile bracket that ties the top of an IKEA Billy bookcase to the wall and replaces the flimsy strap or a lost original fitting.

IKEA EKET cabinet anti-tip bracketA bracket that ties an EKET cube (35 × 35 cm) to the wall so a stacked tower cannot tip.

IKEA HEMNES bookcase anti-tip bracketA bracket that ties a HEMNES bookcase (90 cm) to the wall through the existing top-rail holes.

IKEA KALLAX 2×2 anti-tip bracketA bracket that ties a 2×2 KALLAX (77 × 77 cm) to the wall through the existing back-panel holes.

IKEA LACK shelf wall-bracket coverA cover that hides the stamped LACK shelf bracket (about 50 × 40 mm) so the 30 or 110 cm shelf looks like it floats.

IKEA LACK wall-shelf hidden bracketA hidden bracket that replaces the stamped LACK shelf hardware with a 120 × 20 × 16 mm French-cleat style plate so a 110 cm LACK shelf sits tighter to the wall.

IKEA Ribba frame tabletop stand for 21 x 30 cmA pair of feet that lets a wall-only IKEA Ribba frame stand on a desk or shelf, since Ribba frames come without a back easel.

IKEA Skadis holder for Wera Joker wrench setA stepped rack that clips to an IKEA Skadis pegboard and stands an 11-piece Wera Joker combination wrench set (8 to 19 mm) on edge in size order.

IKEA Skadis hook for Knipex Cobra and combination pliersA double-prong Skadis hook that hangs a Knipex Cobra 250 or combination pliers by the open jaws so the handles dangle in reach.

iPad 10th gen treadmill console holder clipA cradle that hooks over the top lip of a treadmill or exercise bike console and holds an iPad 10th generation (248.6 x 179.5 x 7 mm) in landscape at a 15 de…

iPad mini car headrest mount for back seatA rear-seat holder for the iPad mini (195.4 x 134.8 x 6.3 mm) that clamps to the two headrest posts so children can watch films in landscape.

iPad Pro 13 inch under-cabinet kitchen mountA pair of L-shaped hooks that screw to the underside of a kitchen cabinet and hold an iPad Pro 13 (281.6 x 215.5 x 5.1 mm) below eye level for recipes and vi…

iPhone 15 stroller handlebar phone mount clampA two-piece clamp that bolts around a stroller or buggy handlebar between 25 and 32 mm in diameter and carries an iPhone 15 (147.6 x 71.6 x 7.8 mm) where you…

iPhone 16 Pro MagSafe wall mount for charger puckA slim wall plate that holds an Apple MagSafe charger puck (56 mm diameter, about 5.5 mm thick) so an iPhone 16 Pro (149.6 x 71.5 x 8.25 mm) snaps onto the w…

iPhone 16 Pro Max car vent mount with MagSafe cutoutA cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape.

iPhone 17 Pro MagSafe bike stem mount, 3D printable part

iPhone 17 Pro MagSafe bike stem mountAn out-front bicycle mount that holds an iPhone 17 Pro (about 150 × 72 × 8.8 mm) on a MagSafe ring so the camera bar clears the stem.

Kärcher K4 pressure washer nozzle holder wall bracketA wall bracket that parks the Vario Power lance, Dirt Blaster nozzle and foam cannon of a Kärcher K4 or K5 pressure washer so they stop rolling around the ga…

Kettlebell wall rack hook for garage gymA hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack.

L-shaped shelf bracket, 150 mm reachA simple right-angle bracket for a light shelf up to about 150 mm deep, holding books, small speakers or plants in a hallway.

Mac mini M4 Pro VESA 100 bracketA VESA 100 bracket that hangs a Mac mini M4 Pro behind a monitor, 130 × 130 mm plate with 20 mm standoffs and four M4 holes.

MagSafe phone holder for shopping cart handleA hook that drops over a 25 to 30 mm shopping cart handle and presents a MagSafe magnet ring so an iPhone 15, 16 or any Qi2 phone hangs from its magnets whil…

Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…

Makita 18V LXT impact wall holsterA holster that parks an 18V LXT impact (about 130 mm without battery) on a 4.5 mm hole pair.

Makita 40V XGT battery wall mountA mount that hangs four 40V XGT batteries (about 90 × 80 mm) on a stud so they are not mixed with 18V LXT packs.

Makita DHS680 track-adapter hookA hook that hangs a DHS680 circular saw on a French cleat or 4.5 mm hole pair by the track-adapter shoe.

Meta Quest 3 controller wall hooks pair, 3D printable part

Meta Quest 3 controller wall hooks pairA pair of wall hooks for the Meta Quest 3 and Quest 3S Touch Plus controllers, which have no tracking ring, so a conventional VR hook has nothing to grab.

Meta Quest 3 headset wall hanger with strap rest, 3D printable part

Meta Quest 3 headset wall hanger with strap restA wall hanger that carries a Meta Quest 3 (184 x 160 x 98 mm with the strap folded, about 515 g) by its facial interface bar, with a second, higher arm that…

Milwaukee M12 battery wall mount holder for 4 packsA wall strip with four sockets that grip the stem of Milwaukee M12 batteries, from the compact CP1.5 to the XC6.0, so charged packs hang ready beside the cha…

Milwaukee M12 FUEL installation-driver holsterA holster that hangs an M12 FUEL installation driver (about 280 mm long) by the barrel so the offset head stays clear.

Milwaukee M18 FUEL impact wall holsterA holster that parks an M18 FUEL impact (about 140 mm long without battery) on a 4.5 mm hole pair so the tool is not on the bench.

Milwaukee SHOCKWAVE bit-case wall clipA clip that hangs a SHOCKWAVE bit case (about 160 × 110 × 30 mm) on a stud so the case is not in a drawer.

Nintendo Switch OLED dock wall mount holder, 3D printable part

Nintendo Switch OLED dock wall mount holderA wall bracket that holds the Nintendo Switch dock beside or behind a TV so the console docks vertically and the HDMI, power and USB cables stay hidden.

Owlet Cam 2 crib-rail clamp, 3D printable part

Owlet Cam 2 crib-rail clampA clamp that holds an Owlet Cam 2 on a 20–40 mm crib rail with a 15 degree downward tilt.

Owlet Dream Sock base station wall mountA cradle that holds the Owlet Dream Sock or Smart Sock 3 base station on the nursery wall at eye level so the glowing ring is visible from the door and the c…

Pedaltrain Classic pedalboard riser for Boss pedals, 3D printable part

Pedaltrain Classic pedalboard riser for Boss pedalsA rear-row riser that clips onto the two back rails of a Pedaltrain Classic or Classic Jr and lifts a Boss compact pedal (73 x 129 x 59 mm) by 40 mm so its f…

Peloton Bike phone and tablet holder trayA tray that clamps to the horizontal section of the Peloton Bike or Bike+ handlebar and holds a phone or small tablet beside the main screen, handy for readi…

Peloton Bike+ phone shelfA shelf that clips onto a Bike+ handlebar (about 40 mm) and holds a phone at 15 degrees so you are not stacking it on the tablet.

Peloton Guide camera shelf riser, 3D printable part

Peloton Guide camera shelf riserA riser that lifts a Peloton Guide (about 140 × 50 × 25 mm) 40 mm above a TV console so the camera sees over a soundbar.

Peloton Row phone cradleA cradle that clips onto a Peloton Row rail (about 35 mm) and holds a phone at 20 degrees so you can follow a class without the official tablet.

Peloton Tread+ tablet riserA 30 mm riser that lifts a phone or small tablet on a Tread+ console so it sits above the official screen bezel.

Petzl headlamp mount for bike helmet ventsA plate that threads onto the elastic headband of a Petzl Actik, Tikka or Swift RL and then hooks into the vent slots of a road or MTB helmet, so the same la…

Philips Hue Bloom under-shelf clipA clip that hides a Hue Bloom (about 120 mm diameter, 90 mm tall) under a 12–24 mm shelf so uplight hits the wall, not the table.

Philips Hue Bridge 2 under-shelf clip, 3D printable part

Philips Hue Bridge 2 under-shelf clipA clip that hides a Philips Hue Bridge (about 91 × 91 × 26 mm) under a 12–24 mm shelf with the Ethernet and power ports facing out.

Philips Hue dimmer switch magnetic wall plateA replacement wall plate for the Philips Hue dimmer switch, a remote about 115 x 35 mm that normally clicks onto a stock plate.

Philips Hue Dimmer v2 magnetic wall plateA plate that holds a Hue Dimmer switch v2 (about 92 × 35 mm) on a steel door or fridge so it is not taped to the wall.

Philips Hue Go 2 wall shelf with USB-C, 3D printable part

Philips Hue Go 2 wall shelf with USB-CA 160 mm shelf that holds a Hue Go 2 and drops a USB-C cable through a 8 mm hole.

Philips Hue motion sensor corner mount bracketA wedge that lets the Philips Hue motion sensor sit in the corner of a room, where its field of view covers the whole space.

Philips Hue Play bar desk-edge clampA clamp that hangs a Hue Play bar (about 254 × 44 × 36 mm) from a 15–32 mm desk edge so bias lighting sits behind a monitor.

Philips Hue Play light bar monitor clip mountA clip that hangs a Philips Hue Play light bar on the back of a monitor without the stock adhesive feet.

Pixel 10 Pro XL out-front bike mount, 3D printable part

Pixel 10 Pro XL out-front bike mountAn out-front handlebar mount for a Pixel 10 Pro XL (about 163 × 77 × 8.6 mm) with a 22.2 / 31.8 mm clamp and a 70 mm deep cradle that clears the Camera Bar.

Pole mount bracket for a 40 mm mastA two-piece clamp that grips a 40 mm round mast and offers a flat face with screw holes for a small antenna or outdoor Wi-Fi unit.

Quad Lock wall mount plate for shower or workshopA flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.

Razer BlackShark V2 under desk headset hangerAn under-desk hanger for the Razer BlackShark V2 Pro and similar wide-band gaming headsets from SteelSeries Arctis Nova, HyperX Cloud III and Logitech G Pro X.

reMarkable 2 wall mount holder with Marker slotA wall holder for the reMarkable 2 tablet (187 x 246 x 4.7 mm) that keeps it and its Marker within reach beside a desk or on a kitchen wall for the shopping…

reMarkable Paper Pro wall dock with Marker slot, 3D printable part

reMarkable Paper Pro wall dock with Marker slotA wall dock that holds a reMarkable Paper Pro (about 274 × 197 × 5.1 mm) and parks the Marker Plus in a 12 mm bore 140 mm deep.

Ring Battery Doorbell Pro 45-degree wedge, 3D printable part

Ring Battery Doorbell Pro 45-degree wedgeA 45-degree wedge that aims a Ring Battery Doorbell Pro (about 128 × 62 × 28 mm) down a driveway instead of at the street.

Ring Video Doorbell 30 degree wedge mountAn angled spacer that turns a Ring Video Doorbell 2nd gen towards the path when the door sits in a recess.

Ryobi ONE+ battery wall mount strip for 18V packsA strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem.

Saddle clamp for 20 mm electrical conduitA single-screw saddle that fixes 20 mm PVC electrical conduit to a wall or joist, handy when a run needs one more clip and the shop is closed.

Samsung Galaxy S24 Ultra dashboard phone cradle mountA cradle for the Samsung Galaxy S24 Ultra (162.3 x 79 x 8.6 mm) that clips onto a standard 17 mm ball from an adhesive dash base, so the phone sits at eye le…

Samsung Galaxy Tab S9 wall mount bracket with charging slotA wall bracket that turns a Samsung Galaxy Tab S9 (254.3 x 165.8 x 5.9 mm) into a smart home panel or family calendar.

Samsung Galaxy Z Fold 6 car vent mount foldedA vent cradle sized for the Samsung Galaxy Z Fold 6 when it is closed (153.5 x 68.1 x 12.1 mm), the thick form factor that most universal phone mounts cannot…

Scotty rod holder base adapter for kayak trackA plate that lets a Scotty 241 or 244 round deck mount, and therefore any Scotty rod holder, bolt onto the 25 mm gear track found on Oru Kayak, Perception, O…

Shimano Di2 junction box holder for 31.8 mm handlebarThe Shimano SM-EW90 Di2 junction A normally hangs under the stem on a rubber band, where it rattles and gets pulled by the bar bag straps.

Ski and snowboard wall rack bracketA wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that…

Sonos Era 100 wall bracket with cable channelA wall bracket for the Sonos Era 100, a 182 mm tall, 120 mm wide and 130 mm deep speaker weighing about 2 kg with a 1/4 inch-20 threaded insert on the rear.

Sonos Era 300 wall bracket with cable channel, 3D printable part

Sonos Era 300 wall bracket with cable channelA bracket that holds an Era 300 (about 260 mm wide) 40 mm off the wall with a 10 mm cable channel.

Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.

Sony WH-1000XM5 headphone wall hook with cable slot, 3D printable part

Sony WH-1000XM5 headphone wall hook with cable slotA slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…

Starlink Gen 3 router wall mount bracketA bracket that stands the Starlink Gen 3 router upright on a wall or under a shelf so it does not take up a desk.

Starlink Mini window suction mount, 3D printable part

Starlink Mini window suction mountA window mount that holds a Starlink Mini (about 298 × 259 × 39 mm) on two 80 mm suction cups so you can park-and-stay without drilling.

Studio Display iPhone Continuity Camera mountA MagSafe clip that hangs an iPhone 16 or 17 on the top bezel of a Studio Display for Continuity Camera, 8–14 mm bezel clamp and a 56 mm MagSafe disc.

Tesla NACS mobile connector wall holster and cable hookA holster for the Tesla NACS plug on the Mobile Connector or Wall Connector, with a separate hook for the 6 m cable and a shelf for the control box.

TP-Link Tapo C200 camera ceiling mount plateAn inverted mount plate for the TP-Link Tapo C200 pan and tilt camera, which is 86.6 x 85 x 117.7 mm and screws to a base with two holes about 50 mm apart.

Type 2 EV charging plug holster with cable hookA garage holster that receives the Type 2 (Mennekes) plug of a home wallbox or granny cable so the pins stay dry and the cable hangs in a loop below.

Under-shelf bracket for a cable trayA J-shaped bracket that screws to the underside of a shelf or table and cradles a bundle of cables or a slim power strip out of sight.

UniFi Express 7 wall shelfA 140 mm shelf that holds a UniFi Express 7 with a 16 mm WAN cutout and two 4.5 mm holes.

UniFi G6 Instant corner mountA corner mount that aims a G6 Instant at 45 degrees across a porch, 80 × 40 × 40 mm with the official 4-hole pattern.

UniFi U6 Lite ceiling tile adapter plateA plate that lets a Ubiquiti UniFi U6 Lite access point clip to a suspended ceiling grid instead of being screwed through a soft tile.

Valve Index headset and controller wall mount, 3D printable part

Valve Index headset and controller wall mountA combined wall station for the Valve Index headset and its two Knuckles controllers.

VESA bracket for a mini PC behind a monitorA plate that bolts to the 100 x 100 mm VESA holes behind a monitor and holds a small form-factor PC in a cradle, freeing desk space and hiding cables.

Wahoo ELEMNT Bolt out-front mount for 35 mm barsOversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only.

Wahoo KICKR trainer phone holder for handlebarA cradle that clamps a 31.8 mm handlebar on the bike you keep on a Wahoo KICKR, Tacx or Elite trainer and holds a phone at 60 degrees so Zwift, TrainerRoad o…

Wall bracket for a 32 mm pipeA two-screw saddle bracket that holds a 32 mm round pipe or tube flush against a wall, useful for waste pipes, indoor garden lines or a curtain-weight dowel.

Wall bracket for a small bookshelf speakerA wedge-shaped bracket that lifts a compact speaker onto the wall and angles it slightly downward toward the listening position.

Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…

Wall holder for a 10 inch tabletA slim wall dock that turns a tablet into a fixed control panel for a smart home dashboard.

Wall holder for a laptop power brickA cradle that holds a power supply brick against the wall or under a shelf, keeping it off the carpet where it collects dust and overheats.

Wall hook for coiled extension cordsA deep, wide hook that hangs a coiled extension cord or garden lead on the garage wall without kinking it.

Wall mount bracket for a Wi-Fi routerThis bracket gets a flat router off the floor and onto the wall behind the TV or in a utility closet, keeping cables tidy.

Wall mount clips for a power stripA pair of C-shaped clips that screw to a wall or cabinet side and let a power strip slide in and stay put, so it stops dangling from its cord.

Wall mount for 18 V power tool batteriesA wall rail that spare 18 V slide-on battery packs click onto, so they stop rolling around a drawer and are visible when you need one.

Wall mount plate for a Raspberry Pi 4A flat carrier plate that screws to a wall or cabinet and holds a bare Raspberry Pi 4 on standoffs, keeping all ports reachable and the board open for cooling.

Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.

Wyze Cam v4 eave mount with sun hood, 3D printable part

Wyze Cam v4 eave mount with sun hoodAn eave bracket that hangs a Wyze Cam v4 (about 55 × 55 × 90 mm with the stand) under a soffit with a 20 mm sun hood.

Xbox Series S wall mount bracket vertical, 3D printable part

Xbox Series S wall mount bracket verticalA two-piece bracket set that hangs an Xbox Series S (275 x 151 x 63.5 mm, 1.93 kg) vertically on the wall next to the TV with its big round fan facing the room.

Enclosures & cases

Boxes and lids for PCBs, sensors, batteries and small electronics.

Adafruit Feather case for a FeatherWing stackAn enclosure built around the Adafruit Feather form factor: 50.8 x 22.8 mm boards with 2.5 mm mounting holes on a 45.72 x 17.78 mm pattern.

AirPods Pro 2 case belt clip with carabiner holeA snap-on sleeve for the AirPods Pro 2 charging case (60.6 x 45.2 x 21.7 mm) with a spring belt clip on the back and a 6 mm carabiner hole on top, so the ear…

AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.

AirTag luggage tag holder with screw-closed caseA luggage tag that hides an Apple AirTag (31.9 mm diameter, 8 mm thick) inside a screw-closed case so it cannot be prised out in transit, with a loop for a c…

AirTag wallet card holder slim credit card sizeA credit-card footprint (85.6 x 54 mm) card that holds an Apple AirTag (31.9 mm diameter, 8 mm thick) in a wallet card slot so the wallet can be found in the…

Apple Watch Series 11 travel charger caseA two-part clamshell that holds an Apple Watch Series 11 (about 46 mm case) on its magnetic charger plus a 1 m USB-C cable coiled in a 70 mm spiral.

Apple Watch Ultra charger puck travel case with cable wrapA pocket-size case for the Apple Watch magnetic fast charger used by the Ultra and Series 10, holding the puck (27.9 mm diameter, about 6 mm high) in a 28.4…

Arduino Uno R4 WiFi case with LED matrix windowA protective box for the Arduino Uno R4 WiFi that keeps the 12 x 8 LED matrix visible.

Backbone One 2 iPhone travel caseA two-part case that holds a Backbone One 2 with an iPhone 17 still clipped in, 180 × 90 × 25 mm.

Battery pack case for three AA cells with switchA compact holder for three AA cells side by side, with a slot for a standard 19 x 13 mm slide switch and a wire exit, giving a 4.5 V supply for LED strips, s…

Bezel case for a 0.96 inch OLED moduleA small front bezel and back cover for the popular 0.96 inch I2C OLED module, turning a bare board into a neat readout you can screw to a panel or stand on a…

BMW G20 3 Series key fob cover caseA two-part snap shell for the BMW G20, G30 and G05 key fob (2019 onward, the fob with the chrome band), protecting the glossy plastic from keys and coins.

Bosch Kiox e-bike display holder cover capWhen you take the Bosch Kiox display off a Cube, Riese und Muller or Trek e-bike, the magnetic holder and its charging contacts are left exposed to rain and…

Case for an LM2596 buck converter moduleA tidy shell for the common 43 x 21 mm LM2596 step-down module, covering the exposed inductor and trimmer while leaving the input and output terminals reacha…

Enclosure for a relay module with terminal accessA protective housing for a one- or two-channel relay module that hides live terminals while leaving the screw terminals reachable through a slot and the cont…

ESP32-C3 SuperMini case with BME280 sensor ventsA tiny room sensor enclosure for an ESP32-C3 SuperMini board (22.5 x 18 mm) paired with a BME280 breakout (about 15 x 12 mm).

ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.

Flipper Zero hard shell case with GPIO coverA bumper-style protective shell for the Flipper Zero, whose body is 100 x 40 x 25 mm.

Flipper Zero Wi-Fi devboard caseA slim case that covers a Flipper Wi-Fi devboard GPIO without blocking the SMA, snap fit, 1.2 mm PETG.

Garmin Edge 1040 silicone-style bumper caseA flexible bumper printed in TPU that wraps the Garmin Edge 1040 and 1040 Solar (59.3 x 117.6 x 20 mm) to protect the corners in a crash and the screen edge…

Handheld control box for four push buttonsA palm-sized housing for four 12 mm momentary push buttons, useful as a shortcut pad or a machine pendant.

Heltec LoRa V3 Meshtastic case with SMA antenna holeA rugged node case for the Heltec WiFi LoRa 32 V3, the board most Meshtastic beginners start with.

Home Assistant Yellow DIN-rail clipA clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap.

Junction box with gasket groove for outdoor useA small outdoor box for joining low-voltage cables, sensors or LED drivers where rain must stay out.

Kia EV6 key fob cover with lanyard loopA protective sleeve for the Kia EV6, Niro EV and Hyundai Ioniq 5 smart key, which shares the same 5-button fob body.

LilyGO T-Display S3 case with screen bezelA desktop shell for the LilyGO T-Display S3, an ESP32-S3 board with a 1.9 inch 170 x 320 pixel display.

Logitech MX Anywhere 4 travel caseA two-part case for an MX Anywhere 4, 110 × 70 × 40 mm with 0.4 mm clearance and a 8 mm dongle well.

M5Stack Atom Lite housing with Grove port cutoutAn outer housing that lets an M5Stack Atom Lite (24 x 24 x 10 mm) be screwed to a wall or DIN box while its Grove connector stays accessible.

Matter Thread border-router case for nRFA vented case for an nRF52840 Thread border-router board with SMA and USB-C cutouts.

MeanWell LRS-350 terminal cover with strain reliefA snap-on guard for the exposed screw terminals on a MeanWell LRS-350 series power supply, whose chassis is 215 x 115 x 30 mm with the terminal block at one…

Nintendo Switch 2 dock dust coverA cover that sits on a Switch 2 dock (about 170 × 80 × 60 mm) when the console is undocked so dust is not in the USB-C slot.

Oura Ring 4 charger travel capsule, 3D printable part

Oura Ring 4 charger travel capsuleA 40 mm diameter capsule that holds an Oura Ring 4 on its official puck plus 40 cm of USB-C cable.

Project box for an ESP32 dev board with USB openingA compact housing for a 30-pin ESP32 DevKit board that leaves the USB connector exposed for programming and power while covering the pins.

Project box with sliding lid, 100 x 60 x 30 mmA general purpose electronics box with a lid that slides in along dovetail grooves, avoiding screws and giving quick access to whatever is inside.

Raspberry Pi 5 case with active cooler cutoutA two-part snap-fit case sized for the Raspberry Pi 5, whose board measures 85 x 56 mm with M2.5 mounting holes on a 58 x 49 mm pattern.

Raspberry Pi 5 Hailo HAT caseA case that clears a Pi 5 with the Hailo AI HAT, 30 mm extra height, GPIO slot and 40 mm fan vents.

Raspberry Pi Camera Module 3 case with tripod threadA compact housing for the Raspberry Pi Camera Module 3, which uses a 25 x 24 mm board with 2.2 mm holes on a 21 x 12.5 mm pattern.

Raspberry Pi Pico W enclosure with header slotsA small box for the Raspberry Pi Pico W, a 51 x 21 mm board with two M2 holes on a 47 x 11.4 mm pattern and a castellated 40-pin edge.

Raspberry Pi Zero 2 W slim snap-fit caseA minimal shell for the Raspberry Pi Zero 2 W, which measures 65 x 30 mm with four M2.5 holes on a 58 x 23 mm pattern.

Safety cover for an open-frame 12 V power supplyA vented cover that fits over an open-frame 12 V 5 A switching power supply so the mains terminals are no longer exposed on a bench or inside a project.

Screw-lid enclosure for an 80 x 50 mm PCBA general purpose electronics box for a custom 80 x 50 mm circuit board, with four corner posts, a screw-down lid and blank walls you can specify openings in…

Seeed XIAO ESP32C3 tiny keychain caseA pocket-sized shell for the Seeed Studio XIAO ESP32C3, a 21 x 17.8 mm board with a USB-C port and a u.FL antenna connector.

Shelly 2PM Gen3 DIN-rail adapterAn adapter that snaps a Shelly 2PM Gen3 onto a 35 mm DIN rail with 0.3 mm clearance.

Shimano STEPS SC-E5000 display protective coverThe Shimano STEPS SC-E5000 display sits proud of the handlebar and is easily scratched when an e-bike is parked in a crowded rack or leaned against a wall.

Slim case for a Raspberry Pi PicoA low-profile shell for the Raspberry Pi Pico that guards the board and exposes only the micro USB connector and the BOOTSEL button.

Snap-lid enclosure for an Arduino UnoA protective box for an Arduino Uno with openings for the USB-B port and barrel jack, and a lid that clicks on without screws.

Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.

SONOFF ZBDongle-E protective case with USB extension slotA wraparound sleeve for the SONOFF ZBDongle-E Zigbee coordinator, which measures about 65 x 23 x 12 mm including its USB-A plug and carries an SMA antenna co…

Storage box for four 18650 cellsA lidded box that carries four 18650 lithium cells with each one in its own bore, so the terminals cannot touch and short in a bag.

Vented case for a Raspberry Pi 4A two-part shell for the Raspberry Pi 4 that protects the board while keeping it cool, with cut-outs for USB, Ethernet, HDMI, audio, USB-C power and the micr…

Vented housing for a temperature and humidity sensorA louvred shell for a DHT22, BME280 or similar sensor that shields it from direct light and drips while letting air circulate, so readings reflect the room r…

Wemos D1 Mini enclosure with DHT22 sensor slotA wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.

Whoop 4.0 battery pack protective travel caseA hard case for the Whoop 4.0 slide-on battery pack, the small rectangular block that is easy to crush in a gym bag, roughly 40 x 27 x 12 mm depending on rev…

Adapters & couplers

Hose, vacuum, tripod and thread adapters between two standards.

AA to D cell battery adapterA hollow shell the size of a D cell that carries a single AA battery, letting you run a lantern, radio or toy on the smaller cells you already have.

Adapter plate to remount a PCB on a different hole patternA thin intermediate plate that lets a circuit board with one set of mounting holes attach to an enclosure or chassis drilled for another.

Bontrager Blendr to GoPro mount adapterTrek bikes ship with Bontrager Blendr stem and bar bases that accept only Blendr accessories.

Bosch GKS 18V track dust-port adapterAn adapter from a GKS 18V-68 GC dust port (about 35 mm) to a 27 mm Festool or 36 mm shop-vac hose.

Bosch GKS 190 circular saw dust port adapter 35 mmAn adapter that clips onto the chip ejection chute of a Bosch GKS 190 or GKS 18V-57 circular saw and gives it a 35 mm round spigot for a workshop vacuum hose.

Broom handle thread adapter for a mismatched headA short adapter that lets a threaded broom or mop head screw onto a handle with a different thread, saving a perfectly good pole when the head is replaced.

Bryton Rider to Garmin quarter-turn mount adapterBryton Rider 750, S500 and S800 computers use a quarter-turn foot that is close to Garmin's but not identical, so on many Garmin out-front mounts the unit fe…

Bugaboo Fox stroller cup holder adapter clampA clamp that fixes a cup holder to the handlebar or frame of a Bugaboo Fox, Cameleon or Bee so a coffee and a water bottle ride along without dangling from a…

Canon EOS R6 hot shoe dual cold shoe bar, 3D printable part

Canon EOS R6 hot shoe dual cold shoe barA T-shaped bar that slides into the hot shoe of a Canon EOS R6, R6 Mark II or R50 and offers two cold shoes side by side, so a Rode VideoMic GO II and a smal…

DJI Action 5 Pro chest-mount adapter, 3D printable part

DJI Action 5 Pro chest-mount adapterAn adapter that puts a DJI Action 5 Pro (about 42 × 33 × 33 mm with the frame) onto a standard 3-prong GoPro chest mount.

DJI Mic 2 receiver cold-shoe hoodA hood that shades a Mic 2 receiver screen on a cold shoe, 40 × 30 × 18 mm.

DJI Mini 4 Pro landing gear extensions clip-on, 3D printable part

DJI Mini 4 Pro landing gear extensions clip-onA set of four clip-on leg extensions for the DJI Mini 4 Pro and Mini 3 Pro that raise the airframe 35 mm so the downward vision sensors and gimbal stay out o…

Dremel Multi-Max dust extraction adapter for shop vac hoseA clip-on shroud for the Dremel Multi-Max MM50 and MM40 oscillating tools that catches dust from the sanding pad and routes it to a 32 mm vacuum hose.

Dust extraction adapter, 35 mm tool port to 58 mm hoseA tapered adapter that connects the small 35 mm dust port on a sander or router to the 58 mm hose of a shop vacuum, so chips end up in the bin instead of on…

Dust-port adapter 36 mm to 27 mm Festool, 3D printable part

Dust-port adapter 36 mm to 27 mm FestoolA stepped adapter from a 36 mm shop-vac cuff to a 27 mm Festool hose with 0.2 mm tapers so both sides stay put.

Dyson V11 wand to 32 mm standard vacuum tool adapterAn adapter that clicks onto the wand or motor body of a Dyson V11, V10 or V15 and presents a standard 32 mm spigot so universal crevice tools, brush heads an…

Elgato Key Light Air quarter inch tripod adapterAn adapter that lets an Elgato Key Light Air sit on any camera tripod or light stand instead of its own weighted desk base.

Fan adapter, 80 mm frame to 120 mm fanA funnel-shaped shroud that fits a quieter 120 mm fan onto a case or power supply opening designed for an 80 mm fan.

Festool CT 27 mm hose to 32 mm adapterA short adapter that lets the 27 mm anti-static hose from a Festool CT 26, CT 36 or CTL MIDI plug into 32 mm dust ports on non-Festool tools such as Makita s…

Fidlock TWIST bottle-base spacerA 8 mm spacer that sits under a Fidlock TWIST base so a 590 ml bottle clears a down-tube boss or shock.

Filament spool hub adapter for 52 mm boresA pair of hub inserts that centre a filament spool with a large 52 mm bore on a slim holder rod so it turns smoothly instead of wobbling and tangling.

Godox V1 flash foot stand with 1/4 inch thread, 3D printable part

Godox V1 flash foot stand with 1/4 inch threadA replacement mini stand for a Godox V1, V860III or TT685 speedlight that has lost the plastic foot it shipped with.

GoPro Hero 13 bite-mount spacerA 8 mm spacer that moves a Hero 13 off a bite mount so the Media Mod does not hit your chin.

GoPro Hero 13 Media Mod cold-shoe bar, 3D printable part

GoPro Hero 13 Media Mod cold-shoe barA dual cold-shoe bar that bolts onto a GoPro Hero 13 Media Mod (about 80 mm wide) so a wireless mic and a light sit on the same axis.

GoPro mount to Garmin quarter-turn adapter for bike lightsA puck that lets a bike light with a GoPro-style two-finger foot, such as a Knog Blinder, Exposure Strada or Magicshine, hang from a spare Garmin quarter-tur…

Hydro Flask 21 oz bottle cage holder for bikeA cage that holds an insulated Hydro Flask 21 oz or 24 oz standard mouth bottle (73 mm diameter) on a bike, keeping coffee hot or water cold on a commute or…

IKEA Besta cable pass-through grommet for a 60 mm holeA two-part grommet that finishes a hole drilled through the back or shelf of an IKEA Besta TV bench so HDMI and power cables pass through cleanly without che…

IKEA Raskog cart hook and cup holder clipA clip-on accessory for the IKEA Raskog trolley that snaps over the wire rail and adds a cup holder for a drink or pen pot and a hook for scissors or headpho…

Insta360 X3 to GoPro finger mount adapterThe Insta360 X3 and X4 use a 1/4-20 tripod thread on the base, while bike, helmet and chest mounts use the GoPro three-finger interface.

Insta360 X5 invisible-selfie adapterAn adapter that puts an X5 on a 1/4-20 selfie stick at the official invisible-selfie angle, 15 degrees.

JOBY GorillaPod 3K phone saddleA saddle that puts a 70–85 mm phone on a GorillaPod 3K ball head with a 1/4-20 insert.

Knog Blinder light to GoPro mount adapterKnog Blinder and Plus lights strap around a handlebar with an integrated silicone band, which means they cannot use the GoPro mount under most out-front comp…

Lampshade reducer ring, 40 mm to 28 mm fittingA thin ring that lets a lampshade with a 40 mm European fitting sit on a lamp with a 28 mm bayonet holder, the perennial problem when shades and lamps come f…

Lezyne bike light mount to GoPro adapterLezyne Macro Drive, Lite Drive and Micro Drive lights slide onto a small rail on their strap bracket.

LoRa 868 MHz antenna mast clip for 25 mm poleA clip that fixes an SMA-mount 868 or 915 MHz LoRa whip antenna to a 25 mm pole so a Meshtastic or Helium node gets height and a clear view.

MagSafe charger puck to 1/4-20 tripod mount adapterA holder that turns an Apple MagSafe charger puck (56 mm diameter, about 5.5 mm thick) into a magnetic tripod head, so an iPhone 16 Pro snaps onto any tripod…

Makita SP6000 track saw dust port adapter 36 mmA swivel adapter for the Makita SP6000 and DSP600 18V LXT track saws that converts the saw's oval-ish 28 mm dust chute to a round 36 mm spigot for a Festool…

Manfrotto 200PL plate to Arca-Swiss dovetail adapter, 3D printable part

Manfrotto 200PL plate to Arca-Swiss dovetail adapterA block that screws to the bottom of a Manfrotto 200PL or 200PL-PRO quick-release plate and gives it a 38 mm Arca-Swiss dovetail, so a camera that lives on a…

Microphone stand thread adapter, 3/8 to 5/8 inchA threaded bushing that lets a European 3/8 inch microphone stand accept a US 5/8 inch 27 TPI clip or shock mount.

Nalgene 32 oz bottle cage adapter for bikesA 32 oz Nalgene wide mouth is 89 mm across, far too fat for the 74 mm cages on a bikepacking or touring frame.

Ortlieb Ultimate 6 bar adapter 31.8 mmAn adapter that lets an Ultimate 6 mount clamp a 31.8 mm bar instead of the 25.4 it assumes, 4 mm shim pair.

Peak Design Bike Mount to GoPro adapterAn adapter that puts a GoPro 3-prong under a Peak Design Bike Mount so a light and a phone share the bar.

Peak Design Capture clip backing plate for thin straps, 3D printable part

Peak Design Capture clip backing plate for thin strapsA spacer plate that sits behind a Peak Design Capture V3 clip so it clamps firmly onto thin backpack straps, seatbelt-style webbing or a 20 mm MOLLE row that…

Peak Design Capture v3 to Arca adapterAn adapter that puts Capture v3 on an Arca rail, 38 mm dovetail and the official Capture hole.

Peak Design mobile SlimLink to 1/4-20 tripod adapterA tripod adapter for Peak Design Everyday cases and Universal adapters that reproduces the square SlimLink mounting boss and adds a 1/4-20 socket underneath…

Peak Design Travel Tripod phone clampA clamp that puts a 70–85 mm phone on a Travel Tripod's cold shoe, 12 mm shoe and a 1/4-20 backup.

PopSocket base to MagSafe ring adapter plateA thin plate that takes a standard PopSocket PopGrip base on one side and a stick-on MagSafe ring on the other, so the grip snaps onto an iPhone 15, 16 or Ga…

PVC pipe adapter, 40 mm to 50 mmA reducing coupler that connects a 40 mm PVC pipe to a 50 mm pipe for low-pressure drains, dust collection or a garden gravity feed.

Quad Lock Pro 22.2 mm handlebar spacerA 4 mm spacer that lets a Quad Lock Pro clamp sit on a 22.2 mm bar without crushing the sleeve.

Quad Lock to 1/4-20 tripod adapter plateA disc that screws onto any tripod, gimbal or selfie stick with a standard 1/4-20 thread and carries a Quad Lock style twist recess, so a phone in a Quad Loc…

Quad Lock to Peak Design SlimLink adapter plateAn adapter puck with a Quad Lock style four-lug pattern on one face and a Peak Design SlimLink style square boss on the other, so a phone in a Peak Design Ev…

Raspberry Pi 5 USB-C power cable strain relief bootA snap-on boot that supports the USB-C plug of the official Raspberry Pi 27 W power supply where it meets the Pi 5, preventing the wiggle that causes undervo…

Raspberry Pi 5 VESA 100 mount adapter plateA plate that hangs a Raspberry Pi 5 on the back of a monitor using the 100 x 100 mm VESA holes, turning a screen into a compact desktop or kiosk.

Raspberry Pi Camera Module 3 GoPro mount adapterAn adapter that puts a Raspberry Pi Camera Module 3 on any GoPro-style mount, giving access to hundreds of clamps, suction cups and helmet mounts.

Rigid shaft coupler, 5 mm to 8 mmA rigid coupling that joins a 5 mm motor shaft to an 8 mm lead screw or output shaft in low-torque projects such as small linear stages or slow turntables.

Rode Wireless GO II receiver cold shoe cradle, 3D printable part

Rode Wireless GO II receiver cold shoe cradleA cradle that fixes a Rode Wireless GO II receiver, which is 44 x 45.3 x 18.5 mm, onto the hot shoe of a Sony A7 IV, Canon EOS R6 or Fujifilm X-T5 without re…

RØDE Wireless ME dual cold-shoe sledA sled that holds two Wireless ME transmitters on one camera shoe, 70 × 18 × 12 mm with two ISO 518 pockets.

Rokform RokLock to MagSafe ring adapter discA disc that twists into a Rokform RokLock mount and presents a MagSafe magnet ring on its face, so an iPhone 16 or any MagSafe phone without a Rokform case c…

Samsung Galaxy Buds 3 Pro adapter insert for AirPods standsA padding insert that lets the Samsung Galaxy Buds 3 Pro case (58.9 x 48.7 x 24.4 mm) sit in stands and docks cut for the AirPods Pro 2 case (60.6 x 45.2 x 2…

Shelly 1 Mini Gen3 DIN rail adapter clipA clip that mounts a Shelly 1 Mini Gen3 relay onto a standard 35 mm top-hat DIN rail inside a consumer unit or junction box.

Shop-Vac 2.5 inch hose to 35 mm tool dust adapterA stepped reducer that joins a Shop-Vac, Craftsman or Ridgid 2.5 inch (63.5 mm OD) hose end to the 35 mm dust port found on most European sanders and track s…

Shower caddy hook adapter for a 19 mm shower railAn adapter that lets an over-the-showerhead caddy from Simplehuman, OXO or IKEA hang from the vertical riser rail instead, when the shower head is too low or…

Shure SM7B to 3/8 inch mic arm adapter, 3D printable part

Shure SM7B to 3/8 inch mic arm adapterA threaded adapter that lets a Shure SM7B or SM7dB yoke, which has a 5/8-27 female thread, screw onto a boom arm that only offers a 3/8-16 male stud, such as…

Sony A7 IV Arca-Swiss plate with anti-twist lip, 3D printable part

Sony A7 IV Arca-Swiss plate with anti-twist lipA camera-specific Arca-Swiss plate for the Sony A7 IV, A7R V and A7C II that cannot rotate on the 1/4-20 tripod socket because a 4 mm lip hooks the rear edge…

Sony ZV-E10 II cage with Arca plate, 3D printable part

Sony ZV-E10 II cage with Arca plateA three-sided cage for a Sony ZV-E10 II (about 121 × 68 × 54 mm body) with a 38 mm Arca-Swiss dovetail on the base, a cold shoe on top, and cutouts for the f…

SP Connect SPC+ to Quad Lock mount adapterAn adapter disc that lets a phone in an SP Connect SPC+ case ride on Quad Lock bike, motorbike and car mounts, or the other way round if you flip the descrip…

Speaker stand pole adapter, 35 mm socketA cup that fits over a 35 mm speaker stand pole and provides a flat top with screw holes for a monitor speaker or small light that lacks a pole socket.

Square to round duct adapter, 100 mmA transition piece that connects a 100 mm round ventilation hose to a 110 x 110 mm square wall grille or fan housing, common in bathroom extract fans and sma…

SwitchBot Blind Tilt rod adapter 6 mm, 3D printable part

SwitchBot Blind Tilt rod adapter 6 mmAn adapter that lets a SwitchBot Blind Tilt drive a 6 mm square tilt rod instead of the 7 mm it shipped for.

Tesla Model Y cup holder adapter for large water bottlesA sleeve that drops into one of the Tesla Model Y or Model 3 console cup holders, which are about 75 mm across and 70 mm deep, and widens the opening to 90 m…

Thule roof rack T-track adapter for bike carrierThule WingBar and WingBar Evo bars have a 20 x 20 mm T-track along the top, and older bike carriers, ski racks or DIY kayak saddles that clamp around a squar…

Topeak Ninja Master+ cage adapterAn adapter that puts a Ninja Master+ CO2/tool pouch on a bottle-cage boss pair when the official mount does not fit a sloping tube.

Tube reducer sleeve, 25 mm to 22 mmA stepped sleeve that lets a 22 mm tube plug into the end of a 25 mm tube, useful for extending a curtain pole, joining two lengths of aluminium tubing or fi…

UniFi Flex Mini switch DIN rail adapterAn adapter that clips a Ubiquiti UniFi Flex Mini five-port switch onto a 35 mm DIN rail inside a network cabinet or smart home panel.

Vacuum hose adapter, 32 mm to 35 mmA stepped sleeve that joins a 32 mm vacuum hose end to a 35 mm attachment, one of the most common mismatches between cleaner brands.

VESA adapter plate, 75 mm to 100 mmA flat plate that lets a monitor with a 75 x 75 mm VESA pattern hang on an arm or wall mount built for 100 x 100 mm.

Wahoo ELEMNT ACE to Garmin quarter-turn adapterAn adapter that puts an ELEMNT ACE on a Garmin quarter-turn mount, 4 mm thick with the ACE 4-hole pattern on top.

Wahoo ELEMNT Roam adapter for Garmin quarter-turn mountsA Wahoo ELEMNT Roam or Bolt will physically lock into a Garmin quarter-turn mount, but Wahoo's tabs are rotated 90 degrees so the screen ends up sideways.

Desk & office

Stands, cable management, pen holders and monitor accessories.

Adhesive desk cable clip set, 3D printable part

Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.

AirPods 4 ANC desk charging stand, 3D printable part

AirPods 4 ANC desk charging standA small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open.

AirPods Pro 2 case charging stand for MagSafe puckA small stand that holds an Apple MagSafe puck at 70 degrees and cradles the AirPods Pro 2 case (60.6 x 45.2 x 21.7 mm) against it, aligning the case coil wi…

AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.

Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.

Akai MPK Mini MK3 keyboard stand with laptop shelf, 3D printable part

Akai MPK Mini MK3 keyboard stand with laptop shelfA two-tier stand that lifts an Akai MPK Mini MK3 or MPK Mini Plus (318 x 181 x 44 mm) 20 mm off the desk at a 10 degree angle and raises a 13 to 16 inch lapt…

AKAI MPK Mini Plus standA 12 degree stand for an MPK Mini Plus that clears the extra drum pads, 220 mm span in two halves.

Amazon Echo Show 5 adjustable tilt desk standA stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.

Angled business card holder for desk, 3D printable part

Angled business card holder for deskA tilted display block that fans a stack of up to 30 business cards forward so visitors can take one cleanly.

Angled desk phone stand with cable slot, 3D printable part

Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.

Anker 7-in-1 USB-C hub under-desk clip holderA holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.

Anker 737 power bank desk cradle with cable channelA cradle that keeps the Anker 737 Power Bank (PowerCore 24K) standing upright on a desk with its charge cable plugged in and its display readable.

Anker MagGo Qi2 charger puck desk standAn angled desk stand for the round Anker MagGo Qi2 wireless charging pad, so a Qi2 phone such as an iPhone 16 or Galaxy S25 stands at 60 degrees for video ca…

Apple Pencil Pro MagSafe pair trayA tray that parks an Apple Pencil Pro and a USB-C Pencil side by side with 9 mm saddles and a 12 mm cap well.

Apple Watch Series 10 charger dock for nightstandA compact dock that holds the Apple Watch magnetic charging puck (27.9 mm diameter, about 6 mm high) at 70 degrees so a Series 10 in either 42 or 46 mm charg…

Apple Watch Series 11 nightstand angle wedgeA 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow.

Apple Watch Ultra 3 nightstand charger dock, 3D printable part

Apple Watch Ultra 3 nightstand charger dockA nightstand dock that holds an Apple Watch Ultra 3 (about 49 mm case, 12 mm thick) on its magnetic charger at 15 degrees, with a 80 × 20 mm trough behind fo…

Aqara Cube T1 Pro desk cradle, 3D printable part

Aqara Cube T1 Pro desk cradleA 50 mm cradle that parks an Aqara Cube T1 Pro at 15 degrees so it does not roll off a desk, with a 1 mm lip.

Arturia MiniLab 3 angled feetReplacement rear feet that put a MiniLab 3 at 8 degrees, 20 × 12 × 10 mm with the stock 4 mm pin.

Audient EVO 4 mic-stand clampA clamp that hangs an EVO 4 on a 15–25 mm mic stand so the interface sits next to the mic.

Bose QC Ultra Earbuds charging wellA well that parks a QC Ultra Earbuds case (about 66 × 30 × 27 mm) at 15 degrees so the lid faces up on a nightstand.

Bose Smart Ultra soundbar cable combA comb that sits behind a Smart Ultra soundbar and separates HDMI eARC, power and optical so they do not knot.

COROS Pace 3 charger clip dock, 3D printable part

COROS Pace 3 charger clip dockA bedside dock that holds a COROS Pace 3 (about 42 mm) on its pogo-clip charger at 20 degrees.

COROS Vertix 2S charger dockA dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest.

Desk tray for paper clips and binder clips, 3D printable part

Desk tray for paper clips and binder clipsA shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.

Dyson Corrale HS07 charger dockA dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass.

Dyson OnTrac charging-case standA stand that parks a Dyson OnTrac charging case (about 80 × 70 × 40 mm) at 20 degrees so the earbuds face up on a nightstand.

Elgato Facecam MK.2 privacy shutterA sliding shutter that covers a Facecam MK.2 lens, 30 × 18 × 6 mm with a 1 mm track.

Elgato Stream Deck MK.2 under-monitor mountA bracket that hangs an Elgato Stream Deck MK.2 below the bottom edge of a monitor so it stays in reach without a footprint on the desk.

Elgato Stream Deck Neo monitor-lip mount, 3D printable part

Elgato Stream Deck Neo monitor-lip mountA lip mount that hangs an Elgato Stream Deck Neo (about 140 × 85 × 20 mm) under a 4–32 mm monitor bezel.

Elgato Stream Deck XL low-profile angled standA single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.

Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.

Focusrite Scarlett 2i2 4th Gen angled desk stand, 3D printable part

Focusrite Scarlett 2i2 4th Gen angled desk standA desk stand that tilts a Focusrite Scarlett 2i2 4th Gen or Scarlett Solo (the 2i2 is 180 x 47.5 x 117 mm) back 25 degrees so the gain halos and Air button f…

Focusrite Scarlett Solo 4th Gen angled standA 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses.

Framework 16 speaker-module stand feetFeet that lift a Framework 16 8 mm when the speaker modules are in so the down-firing drivers clear a desk.

Framework Desktop under-desk trayA ventilated tray that clamps a Framework Desktop (about 190 × 190 × 75 mm) under a 15–36 mm desk so the rear exhaust stays open.

Framework Laptop 13 vertical dock, 3D printable part

Framework Laptop 13 vertical dockA vertical dock that holds a Framework Laptop 13 (about 16 mm thick closed, 297 mm wide) on its side so the expansion cards stay accessible.

Galaxy S25 Ultra S Pen desk dock, 3D printable part

Galaxy S25 Ultra S Pen desk dockA nightstand dock for a Samsung Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) that holds the phone at 50 degrees and parks the S Pen in a 7.2 mm square well 45…

Galaxy Tab S10 Ultra easel stand, 3D printable part

Galaxy Tab S10 Ultra easel standAn easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin…

Garmin Fenix 8 charger cable dock, 3D printable part

Garmin Fenix 8 charger cable dockA desk dock that holds a Garmin Fenix 8 (51 mm case) face-out while the official clip charger clamps the back.

Garmin Fenix and Forerunner charging cable dock standA desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…

Garmin Forerunner 970 bedside charger standA small bedside stand for a Garmin Forerunner 970 (about 47 mm) that holds the watch on its clip charger at 25 degrees so the display is readable from the pi…

Garmin Instinct 3 charger-clip dockA dock that holds an Instinct 3 on its clip charger at 20 degrees, 48 mm nest.

Garmin MARQ Carbon charger standA stand that holds a MARQ Carbon (about 46 mm) on its clip charger at 15 degrees so the titanium case is not on the nightstand.

Garmin Venu 3 charger-clip dockA dock that holds a Venu 3 (about 45 mm) on its clip charger at 20 degrees.

Govee TV Backlight 3 camera hood, 3D printable part

Govee TV Backlight 3 camera hoodA hood that shades the Backlight 3 camera from a downlight so the colours stay true, 40 × 30 × 20 mm with a 12 mm lens well.

HackRF One PortaPack H2M standA stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.

HomePod 2nd gen bookshelf isolation standA 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf.

IKEA ALEX desk 80 mm round grommetAn 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack.

IKEA ALEX monitor-riser 60 mm grommetA 60 mm round grommet for a homemade ALEX monitor riser so cables drop behind the drawers instead of over the front.

IKEA BESTÅ TV-unit cord channelA channel that hides HDMI and power along the back rail of a BESTÅ TV unit (about 180 mm deep frames) so cables do not show through glass doors.

IKEA EKET cube 40 mm cable grommetA 40 mm grommet for a drilled EKET cube so a router or game console can live inside with cables out the back.

IKEA HEMNES nightstand 35 mm cable grommetA 35 mm grommet that drops into a drilled HEMNES nightstand top so a lamp and phone cable pass without a raw hole.

IKEA KALLAX cube 50 mm cable passA 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole.

IKEA LACK 60 mm square cable grommet, 3D printable part

IKEA LACK 60 mm square cable grommetA square grommet that drops into a 60 mm LACK hole and presents a 20 mm brush opening plus a 8 mm USB-C notch.

IKEA LACK side-table cable clipA clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa.

IKEA LACK TV-unit cord combA comb that sits on the back rail of a LACK TV unit (145 cm) and separates HDMI, power and optical so they do not knot behind the stand.

IKEA MALM desk under-cable trayA tray that screws under a MALM desk (about 140 or 151 cm) and holds a power strip plus laptop brick so cables are not on the floor.

IKEA SKÅDIS phone charging shelfA 20 mm SKÅDIS shelf that holds a phone at 15 degrees with a 12 mm USB-C slot so a charging brick lives on the pegboard.

IKEA SKOGSTA table cable-clip pairA pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway.

iMac 24 M4 Magic accessory shelfA 16 mm shelf that sits behind a 24-inch iMac M4 stand and holds a Magic Keyboard, Magic Mouse and Magic Trackpad so the desk in front stays empty.

iMac 24-inch M4 cable-tidy footA foot that clips onto the iMac 24 M4 stand and gathers power plus Thunderbolt into a 16 mm channel so they do not show from the front.

iPad Air 11 inch drawing stand with Apple Pencil trayA low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the fro…

iPad Air 13-inch M3 Magic Keyboard riserA 28 mm riser that lifts a 13-inch iPad Air M3 in its Magic Keyboard so a USB-C hub fits underneath.

iPad mini 7 bedside reading stand, 3D printable part

iPad mini 7 bedside reading standA bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does no…

iPad Pro 11 M5 Magic Keyboard riser, 3D printable part

iPad Pro 11 M5 Magic Keyboard riserA two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath.

iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.

iPad Pro 13-inch M4 folio desk easelA low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Penc…

iPhone 16 Pro bedside MagSafe charging stand for StandByA nightstand stand that holds an Apple MagSafe puck at 65 degrees so an iPhone 16 Pro (149.6 x 71.5 x 8.25 mm) charges in landscape and shows the StandBy clock.

iPhone 17 Air MagSafe wallet stand, 3D printable part

iPhone 17 Air MagSafe wallet standA slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…

Keycap storage tray with stem posts, 3D printable part

Keycap storage tray with stem postsA tray for sorting and storing loose MX-style keycaps on a grid of cross-shaped posts that hold each cap upright and prevent scuffing.

Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.

Keychron Q1 HE magnetic wrist restA 20 mm tall wrist rest that matches a Keychron Q1 HE (about 380 × 150 mm) with two 8 × 2 mm magnet pockets that line up with the case's front magnets.

Keychron Q2 HE wrist restA 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets.

Keychron Q6 Max cable combA comb that parks a Q6 Max USB-C cable plus two USB-A dongles along a 15–32 mm desk edge.

Keychron Q8 Max split palm restA split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.

Keychron V1 Max tenting feetA set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options.

Kindle Paperwhite desk reading stand with USB-C cable slotA reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-fre…

Kindle Scribe 2025 folio desk easel, 3D printable part

Kindle Scribe 2025 folio desk easelA low easel that holds a Kindle Scribe (2025, about 230 × 196 × 6 mm) in its folio at 25 degrees for note-taking, with a 198 mm ledge and a 10 mm pen well al…

Logitech Brio 100 monitor-riser clipA clip that parks a Brio 100 (about 70 × 30 × 30 mm) on a 4–32 mm monitor riser so the camera sits above a laptop lid.

Logitech Brio webcam clip for thin bezel monitorsA replacement clip for the Logitech Brio 4K webcam that grips a monitor with a bezel under 6 mm, which the stock mount slides off.

Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.

Logitech MX Keys S angled trayA 6 degree tray that parks an MX Keys S (about 440 × 130 × 20 mm) so the front edge matches an MX Master.

Logitech MX Master 3S mouse stand with USB-C slotA parking dock that holds the Logitech MX Master 3S upright at the edge of a desk while it charges, keeping the mouse pad clear.

Logitech MX Master 4 charging-puck stand, 3D printable part

Logitech MX Master 4 charging-puck standA stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up.

Logitech MX Mechanical palm restA 18 mm palm rest that matches an MX Mechanical (about 430 × 150 mm) with a 8 mm front radius and four 3 mm rubber-foot recesses.

Logitech Pebble 2 combo trayA tray that parks a Pebble 2 mouse (about 107 × 59 × 27 mm) and Pebble 2 keyboard so a travel pair stays together.

Mac mini M4 HDMI and SD dongle trayA tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports.

Mac mini M4 rear cable combA comb that clips onto the rear edge of a Mac mini M4 and separates HDMI, two Thunderbolt cables and power so they do not unplug when you slide the mini.

Mac mini M4 under-monitor shelfA shelf that hides a Mac mini M4 (about 127 × 127 × 50 mm) under a monitor with 20 mm side vents and a 16 mm power/Thunderbolt cutout at the back.

Mac Studio M4 Thunderbolt cable combA comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time.

Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.

MacBook Air 13-inch M4 vertical dockA vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear.

MacBook Air 15 M4 MagSafe right-side clipA clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.

MacBook Air 15-inch M4 clamshell standA clamshell stand for a 15-inch MacBook Air M4 (about 11.5 mm closed, 340 mm wide) that lifts the hinge 20 mm so air can exit and a USB-C hub can sit underne…

MacBook Air M4 USB-C hub under-clamshell trayA 18 mm tray that sits under a closed MacBook Air M4 and holds an Anker or Anker-style 6-port hub so HDMI and SD do not hang off the left side.

MacBook Pro 14 M4 HDMI hub under-standA 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay…

MacBook Pro 14 M4 SD-reader under-stand shelfA 20 mm shelf that sits under a 14-inch MacBook Pro stand and holds an SD card reader plus two CFexpress cards in labelled wells.

MacBook Pro 14 M4 vertical clamshell dockA vertical clamshell dock for a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) with an 17 × 314 mm slot, a 22 mm MagSafe cutout on the right, and…

MacBook Pro 14-inch M4 MagSafe cable holderA desk clip that parks a MagSafe 3 cable at the exact height of a 14-inch MacBook Pro M4 (about 15.5 mm thick) so the connector does not droop and scratch th…

MacBook Pro 16 M4 HDMI hub under-standA 24 mm shelf for a 16-inch MacBook Pro M4 (about 16.8 mm closed, 356 mm wide) that holds a Thunderbolt HDMI hub flush under the chassis.

MacBook Pro 16-inch M4 Pro vertical standA vertical stand for a 16-inch MacBook Pro M4 Pro (about 16.8 mm closed, 356 mm wide) with a 18 × 358 mm slot, a 24 mm MagSafe cutout and a 160 × 110 mm base.

MacBook Pro M4 left-side SD shelfA clip-on shelf that hangs from the left edge of a 14 or 16-inch MacBook Pro M4 and holds an SD reader flush with the HDMI port.

Magic Keyboard Folio iPad 11 riserA 30 mm riser that lifts an 11-inch iPad in its Magic Keyboard Folio so a USB-C hub fits underneath.

Magic Keyboard with Numeric Keypad angled trayA 6 degree tray for the Magic Keyboard with Numeric Keypad (about 418 × 115 × 11 mm) so the larger board matches a Magic Trackpad wedge.

Magic Keyboard with Touch ID desk trayA shallow tray that parks an Apple Magic Keyboard with Touch ID (about 279 × 115 × 11 mm) at 6 degrees with a 14 mm USB-C slot at the back.

Magic Mouse 2 charging flip standA stand that holds a Magic Mouse 2 / USB-C Magic Mouse on its side so you can charge it without the cable pointing at the ceiling.

Magic Trackpad 2 angled desk wedgeA 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard.

MagSafe 3 cable comb for a desk edgeA comb that parks a MagSafe 3 lead plus two USB-C cables along a 15–32 mm desk edge so the 13 mm MagSafe head sits at MacBook height.

MagSafe, Apple Watch and AirPods trio standA nightstand stand that holds a MagSafe puck at 60 degrees, an Apple Watch Ultra / Series puck in a 28 mm bore, and an AirPods 4 case in a 52 mm well.

Midi Fighter 3D angled standA 20 degree stand for a Midi Fighter 3D with a 14 mm USB slot and 10 mm rubber-foot recesses.

Monitor riser with under-shelf storage, 3D printable part

Monitor riser with under-shelf storageA platform that lifts a monitor 90 mm to eye height while the space beneath stores a keyboard, notebook or external drive.

Mouse bungee with weighted base, 3D printable part

Mouse bungee with weighted baseA desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.

Nothing Phone (3) Glyph desk standA clear-back-friendly stand for a Nothing Phone (3) (about 160 × 76 × 8.3 mm) that holds the phone at 65 degrees so the Glyph interface stays visible.

Novation Launchkey Mini MK4 standA 15 degree stand for a Launchkey Mini MK4 with a 14 mm USB-C slot and a 180 mm span.

Novation Launchpad X angled desk stand, 3D printable part

Novation Launchpad X angled desk standAn angled stand that tilts a Novation Launchpad X, Launchpad Mini MK3 or Launchpad Pro MK3 towards you at 20 degrees so the RGB pad grid is readable standing…

NuPhy Air75 V3 tenting feetA set of 8 degree tenting feet that replace Air75 V3 stock feet, 20 × 10 × 8 mm with the official pin.

Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…

Pen cup with sloped compartments, 3D printable part

Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.

Philips Hue Iris desk cable channelA channel that hides the Hue Iris power brick (about 70 × 40 × 25 mm) and USB-C lead behind a desk so the lamp sits clean on a shelf.

Pixel 10 Pro desk stand with USB-C passthrough, 3D printable part

Pixel 10 Pro desk stand with USB-C passthroughA low desk cradle for a Google Pixel 10 Pro (about 153 × 72 × 8.5 mm) that holds the phone at 55 degrees with a 14 mm rear slot so a USB-C cable stays plugge…

Polar Vantage V3 charger cradleA cradle that holds a Vantage V3 on its four-pogo cable at 15 degrees, 48 mm nest.

Pro Display XDR stand cable tidyA tidy that clips onto the Pro Display XDR stand foot and gathers Thunderbolt and power into a 18 mm channel so they do not show from the front.

Quad Lock desk dock stand with USB-C cable slotA desk stand with a Quad Lock style twist-lock recess on a 60 degree face, so a phone in a Quad Lock case clicks on in portrait or landscape and charges thro…

Raspberry Pi 500+ vertical standA vertical stand that holds a Pi 500+ on its side so the ports stay clear, 18 × 290 mm slot.

Samsung Galaxy Buds 3 Pro desk wellA well that parks a Buds 3 Pro case (about 65 × 50 × 25 mm) at 15 degrees with a 12 mm USB-C slot.

Samsung Galaxy S25 Ultra desk standA stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well.

Samsung Galaxy Watch charger puck holder for deskAn upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on…

Samsung Galaxy Watch Ultra charger dockA dock that holds a Galaxy Watch Ultra (about 47 mm) on its official puck at 15 degrees so the display is readable from the pillow.

Samsung Galaxy Z Flip 6 desk stand for Flex modeA desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…

Samsung Odyssey G9 cable combA comb that sits on the Odyssey G9 stand and separates DisplayPort, HDMI and power so they follow the arm.

Samsung The Frame soundbar gap shimA shim that sits between a The Frame (2024/2025) and a soundbar so the Slim Fit Cam still sees the room.

Shure SM7dB yoke spacerA pair of spacers that move an SM7dB yoke 8 mm so a thicker windscreen still clears.

Sliding webcam privacy cover for laptop, 3D printable part

Sliding webcam privacy cover for laptopA thin adhesive frame with a sliding shutter that covers a laptop camera when you are not on a call.

Slim bookend pair with anti-slip base, 3D printable part

Slim bookend pair with anti-slip baseA pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf.

Sloped wrist rest for mechanical keyboard, 3D printable part

Sloped wrist rest for mechanical keyboardA palm rest that matches the front height of a mechanical keyboard so your wrists stay level while typing.

Sonos Move 2 charging-cradle riser, 3D printable part

Sonos Move 2 charging-cradle riserA 20 mm riser under a Move 2 cradle so the speaker clears a deep windowsill lip.

Sony WF-1000XM5 desk charging wellA well that parks an XM5 charging case (about 65 × 45 × 25 mm) on its USB-C side so the lid faces up.

Sony WH-1000XM6 under-desk hanger, 3D printable part

Sony WH-1000XM6 under-desk hangerAn under-desk hanger for Sony WH-1000XM6 headphones (about 190 mm headband span) with a 22 mm saddle, a 6 mm clamp that grabs a 15–30 mm desktop, and a 10 mm…

SSL 2 MKII monitor-riser gap fillerA 20 mm filler that lets an SSL 2 MKII sit under a monitor riser with the knobs still reachable, 300 × 40 × 20 mm in two halves.

Steam Deck 2 JSAUX dock cable combA comb that sits behind a JSAUX-style Deck 2 dock and separates HDMI, USB-C and power so they do not unplug when you grab the Deck.

Sticky note caddy with pen groove, 3D printable part

Sticky note caddy with pen grooveA compact holder that keeps a 76 mm square pad of sticky notes flat and a pen in a groove alongside.

Studio Display tilt-stop wedgeA 12 mm wedge that sits under a Studio Display stand so the screen cannot droop below 10 degrees on a polished desk.

Studio Display USB-C hub shelfA 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.

Studio Display VESA cable channelA channel that hides power and Thunderbolt behind a Studio Display on the official VESA mount so the cables follow the arm instead of hanging.

Suunto Vertical charger-cable standA stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.

Teenage Engineering OP-1 Field standA low stand that holds an OP-1 Field at 12 degrees with a 14 mm USB-C slot and 3 mm side lips so it does not slide.

Thunderbolt 5 dock MacBook under-standA 30 mm stand that lifts a closed MacBook Air or 14-inch Pro and hides a Thunderbolt 5 dock (about 200 × 80 × 28 mm) underneath so the single cable is the on…

Two-piece tablet stand with adjustable angleA cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees.

Under-desk headphone holder with screw mount, 3D printable part

Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.

Universal Audio Volt 1 desk standA 15 degree stand for a Volt 1 with a 14 mm USB slot.

Vertical laptop stand for closed-lid docking, 3D printable part

Vertical laptop stand for closed-lid dockingA weighted-look holder that stores a closed laptop on its edge beside a monitor.

Whoop 5.0 battery pack nightstand dock, 3D printable part

Whoop 5.0 battery pack nightstand dockA nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back.

ZSA Moonlander tenting legs set, 3D printable part

ZSA Moonlander tenting legs setA set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.

Kitchen & home

Household fixes: knobs, feet, spacers, hangers and lids.

AeroPress Go travel funnel cap, 3D printable part

AeroPress Go travel funnel capA funnel cap that replaces the AeroPress Go's drinking lid so you can fill the chamber from a hotel kettle without spilling.

AeroPress stand with paper filter holder and cap slotA countertop stand that keeps an AeroPress Original or Clear chamber, plunger, filter cap and paper filters together in one spot.

Angled spice jar insert for kitchen drawer, 3D printable part

Angled spice jar insert for kitchen drawerA stepped insert that lays spice jars on their backs in a drawer so every label is readable.

Ball Mason jar pour spout lid regular mouth 70 mmA screw-on lid with a flip spout that turns a regular mouth Ball or Kerr Mason jar into a pourer for sugar, rice, oats or homemade dressing.

Bin bag roll dispenser for cabinet door, 3D printable part

Bin bag roll dispenser for cabinet doorA slim box that holds a roll of bin bags inside a cabinet door and feeds one out through a slot.

Breville Barista Express 54 mm portafilter tamping stationA tamping station that cradles the 54 mm portafilter of a Breville or Sage Barista Express, Barista Pro or Bambino at a comfortable angle, with a pocket for…

Breville Barista Pro 54 mm dosing funnel, 3D printable part

Breville Barista Pro 54 mm dosing funnelA 54 mm dosing funnel that sits on a Barista Pro portafilter with a 55 mm ID and a 12 mm wall so a WDT tool does not flick grounds.

Breville Oracle Jet knock-box linerA liner that drops into the Oracle Jet knock box (about 140 × 90 × 80 mm) so you empty pucks without washing the stainless every shot.

Coffee pod holder tray for a drawer or counter, 3D printable part

Coffee pod holder tray for a drawer or counterA tray that stands coffee capsules in tidy rows so you can see how many are left and grab a flavour without digging through a bag.

Cosori 5.5 L air fryer basket divider insertA removable divider that splits the square basket of a Cosori 5.5 litre air fryer into two halves so you can cook fries and nuggets without mixing.

Cosori Dual Blaze basket-divider clip, 3D printable part

Cosori Dual Blaze basket-divider clipA clip that holds a silicone liner halfway across a Dual Blaze basket so two foods do not mix.

Cotton swab dispenser with lift lid, 3D printable part

Cotton swab dispenser with lift lidA bathroom box that stores cotton swabs upright.

Custom shape cookie cutter with stampA cookie cutter made from any outline you describe, with a sharp cutting edge on one side and a wide pressing flange on the other so dough releases cleanly.

Cutlery tray sized to your kitchen drawer, 3D printable part

Cutlery tray sized to your kitchen drawerA five-section cutlery tray built to the exact internal width and depth of a kitchen drawer so it does not slide about or waste space at the sides.

DeLonghi Dedica 51 mm dosing funnel ring for the portafilterA dosing funnel that sits on the 51 mm basket of a DeLonghi Dedica EC685 or EC885 and stops ground coffee from spilling over the rim while you fill and distr…

Dolce Gusto pod drawer that sits under the machineA low storage drawer sized for the wide Dolce Gusto capsule, which is about 54 mm across the top and 35 mm tall, so it never fits in racks made for Nespresso.

Dreame L20 Ultra mop drying rack, 3D printable part

Dreame L20 Ultra mop drying rackA rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots.

Dreame X40 Ultra mop drying rackA rack that stands two X40 Ultra mop pads (about 160 × 75 mm) on edge after you rinse them, 170 × 42 × 52 mm with two 8 mm slots.

Dyson Airwrap barrel drying treeA tree that stands four Airwrap barrels nozzle-up after you wipe them so water does not sit in the magnet.

Dyson Airwrap Complete Long standA counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over.

Dyson Airwrap i.d. barrel wall rackA wall rack that parks the four Airwrap i.d.

Dyson HP07 filter drying rackA rack that stands a washed HP07 HEPA+carbon filter (about 220 mm tall, 180 mm wide) on edge so it dries before you drop it back in the tower.

Dyson Outsize wand floor standA floor stand that holds a Dyson Outsize wand and the extra-wide Motorbar so the taller vacuum does not lean on a wall.

Dyson Supersonic diffuser wall hookA hook that hangs the wide Supersonic diffuser (about 95 mm across) next to the dryer so it is not the thing that never goes back in the box.

Dyson Supersonic Nural wall holderA wall holder that parks a Dyson Supersonic Nural (about 41 mm handle) nozzle-down so water cannot run into the motor.

Dyson V15 Detect HEPA filter drying rackA rack that stands a washed V15 Detect post-motor HEPA filter (about 70 mm diameter, 40 mm tall) on edge so it dries before it goes back in the cyclone.

Family toothbrush holder with drip drain, 3D printable part

Family toothbrush holder with drip drainA counter stand that separates four toothbrushes and a tube of toothpaste so heads never touch and water drips through rather than pooling.

Fellow Stagg EKG drip-tray grid, 3D printable part

Fellow Stagg EKG drip-tray gridA 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.

Gaggia Classic 58 mm tamper stand and portafilter holderA combined tamper stand and portafilter rest for the Gaggia Classic Pro or any machine using a 58 mm basket, including Rancilio Silvia and Lelit.

Gaggia Classic Pro steam-wand tip clip, 3D printable part

Gaggia Classic Pro steam-wand tip clipA clip that parks a Classic Pro steam wand over a 60 mm rinse cup so the tip does not drip on the cup warmer.

Gillette Labs exfoliating-bar razor stand, 3D printable part

Gillette Labs exfoliating-bar razor standA stand that holds a Gillette Labs razor by the bar so the blades dry, 20 mm saddle and a 40 mm drip tray.

Gravity-fed fridge can dispenser, 3D printable part

Gravity-fed fridge can dispenserA two-lane rack that stores canned drinks in the fridge and rolls the next one forward as you take one.

Hario Switch 02 paper-filter caddy, 3D printable part

Hario Switch 02 paper-filter caddyA 110 × 40 × 80 mm caddy that holds a pack of 02 paper filters upright and dry next to a Hario Switch.

Hario V60 dripper stand with coffee scale shelfA pour-over stand that holds a Hario V60 size 02 dripper above a mug or server while a coffee scale sits underneath and reads the total brew weight.

IKEA RÅSKOG handle hook pair, 3D printable part

IKEA RÅSKOG handle hook pairTwo hooks that clip onto a RÅSKOG handle and hold a towel or a bag, 12 mm snap and a 20 mm hook.

IKEA SKUBB hanger-connector clip, 3D printable part

IKEA SKUBB hanger-connector clipA clip that joins two SKUBB hangers vertically so a second row of clothes hangs under the first.

In-drawer knife block with angled slots, 3D printable part

In-drawer knife block with angled slotsA low block that lies in a drawer and holds kitchen knives by their blades in angled slots.

Instant Pot Duo Plus lid wall holderA holder that hangs a Duo Plus lid (about 240 mm) on a cabinet door so the sealing ring dries and the lid is not on the hob.

Instant Pot lid holder that hooks on the side handleA hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so co…

Instant Pot Pro Crisp lid stand, 3D printable part

Instant Pot Pro Crisp lid standA stand that parks a Pro Crisp air-fryer lid (about 280 mm) on its side so the element cools without scorching the counter.

Instant Pot Vortex Plus basket dividerA divider that splits a Vortex Plus air-fryer basket (about 200 × 200 mm) so fries and chicken do not become one meal.

Keurig K-Cup drawer insert with 24 pod slotsA flat insert that drops into an existing kitchen drawer and holds 24 K-Cup pods upright in a four by six grid.

KitchenAid Artisan bowl-lift splash guard, 3D printable part

KitchenAid Artisan bowl-lift splash guardA 220 mm splash ring that sits on a 4.8 L Artisan bowl-lift bowl with a 30 mm pour gap and a 6 mm beater clearance.

KitchenAid flex-edge beater drying standA stand that holds a KitchenAid flex-edge beater (about 140 mm across the hub) upright so the silicone edge dries after washing.

KitchenAid ice-cream bowl freezer riserA riser that parks the KitchenAid ice-cream freeze bowl (about 210 mm diameter) in a freezer so air can move under it and it freezes faster.

KitchenAid pouring-shield wall hookA hook that hangs a KitchenAid pouring shield (about 220 mm across) so it is not the cracked thing at the back of a cupboard.

KitchenAid stand mixer bowl cover lid with pour chuteA splash lid for the 4.8 litre bowl of a KitchenAid Artisan tilt-head mixer that clips onto the rim and lets you add flour through a chute while the beater r…

KitchenAid tilt-head bowl rest padA pad that sits under a tilt-head KitchenAid bowl (4.3 or 4.8 L) so the bowl does not spin on a stone counter while you scrape.

Measuring spoon and cup drawer rack, 3D printable part

Measuring spoon and cup drawer rackA flat rack that lays measuring spoons and cups in graduated nests inside a drawer so the set stays in order.

Nespresso Lattissima milk-jug drying standA stand that holds a Lattissima milk jug (about 70 mm ID) upside down so the frother parts dry.

Nespresso Original capsule carousel for 40 pods, 3D printable part

Nespresso Original capsule carousel for 40 podsA 180 mm carousel that holds 40 Original-line capsules in two stacked rings of 20, each pocket 17.5 mm with 0.3 mm clearance.

Nespresso Original capsule dispenser wall mounted gravity feedA vertical gravity dispenser for Nespresso Original capsules that screws or sticks to the wall or the side of a cabinet next to the machine.

Nespresso Vertuo Next drip-tray extension, 3D printable part

Nespresso Vertuo Next drip-tray extensionAn extension that raises a Vertuo Next drip tray 25 mm so a 12 oz mug fits under the spout.

Nespresso Vertuo Plus capsule bin for 30 podsA bin that sits beside a Vertuo Plus and holds 30 used capsules in a 160 × 120 × 140 mm well with a 4 mm drip lip so coffee does not hit the counter.

Nespresso Vertuo pod holder drawer under the machineA slim drawer unit that slides under a Nespresso Vertuo Next or Vertuo Pop so the machine sits on top and the capsules live underneath.

Nespresso Vertuo Pop drip-tray riserA 25 mm riser under a Vertuo Pop drip tray so a taller mug fits without removing the tray.

Ninja Creami Deluxe pint-lid rack for six, 3D printable part

Ninja Creami Deluxe pint-lid rack for sixA fridge rack that holds six Creami Deluxe pints (about 90 mm) on 92 mm rings with 8 mm gaps so labels stay readable.

Ninja Foodi PossibleCooker lid standA stand that parks a PossibleCooker lid (about 260 mm) on its side so the condensation drips into the pot, not the counter.

Oral-B iO Series 10 head stand for four, 3D printable part

Oral-B iO Series 10 head stand for fourA stand that holds four iO heads on 8 mm pegs plus the handle in a 32 mm well.

Philips Avent baby bottle drying rack with nipple pegsA compact drying rack for Philips Avent Natural bottles with pegs for the wide nipples, screw rings and caps that always end up in a puddle beside the sink.

Pot lid rack for cabinet or counter, 3D printable part

Pot lid rack for cabinet or counterA rack that stands saucepan lids on edge in a row.

Razor stand with drip tray, 3D printable part

Razor stand with drip trayA small stand that holds a cartridge razor head-up so the blades dry between shaves and last longer.

Roborock Q Revo 20 mm threshold ramp, 3D printable part

Roborock Q Revo 20 mm threshold rampA 400 × 80 × 20 mm ramp that lets a Q Revo climb a 20 mm doorway bar.

Roborock S8 Pro Ultra mop drying rackA rack that stands two S8 Pro Ultra mop pads (about 150 × 70 mm) on edge after a wash so they dry before the next dock cycle.

Self-draining soap dish with raised ribs, 3D printable part

Self-draining soap dish with raised ribsA bathroom soap dish that lets bar soap dry between uses.

Senseo coffee pad dispenser tube for 18 padsA vertical tube with an open front slot that stacks Senseo pads and lets you slide the bottom one out with a thumb.

Snap-close chip bag sealing clips, 3D printable part

Snap-close chip bag sealing clipsA set of bag clips that seal crisps, cereal and frozen vegetables shut.

SodaStream bottle drying rack for two bottlesA rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages.

SodaStream Terra bottle drying tree, 3D printable part

SodaStream Terra bottle drying treeA tree that holds three Terra / Duo bottles upside down on 22 mm pegs 80 mm tall with a 140 mm drip tray.

Sofa arm remote control caddy, 3D printable part

Sofa arm remote control caddyA saddle that drapes over the arm of a sofa or chair and holds remotes and a phone within reach.

Stackable fridge egg holder tray, 3D printable part

Stackable fridge egg holder trayA tray that stores a dozen eggs in individual cups inside the fridge.

Tassimo T-Disc holder rack for 30 discsAn angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging.

Tea bag dispenser box with front slot, 3D printable part

Tea bag dispenser box with front slotA countertop box that holds a stack of wrapped tea bags and dispenses one at a time from a slot at the bottom.

Textured coaster set with holder, 3D printable part

Textured coaster set with holderA set of four coasters with a matching holder for the coffee table.

Vitamix Ascent A3500 cup drying treeA tree that dries two Ascent blending cups (about 600 ml, 80 mm ID) plus the blade bases so they are not in the dishwasher rack on their blades.

Vitamix Ascent tamper holster on the lid, 3D printable part

Vitamix Ascent tamper holster on the lidA holster that clips onto an Ascent lid handle and parks the tamper so it does not roll off the machine.

Vitamix Explorian E310 blade-cover standA stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on t…

Vitamix tamper holder clip for the container baseA clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.

Weighted countertop paper towel holder, 3D printable part

Weighted countertop paper towel holderA freestanding holder that dispenses a paper towel roll with one hand thanks to a tension arm resting on the roll.

Weighted napkin holder with hinged bar, 3D printable part

Weighted napkin holder with hinged barA tabletop holder that keeps a stack of napkins tidy on a patio.

Wide mouth Mason jar sprouting lid with mesh 86 mmA sprouting lid for wide mouth Ball, Kerr or Bernardin Mason jars with the 86 mm thread, letting you rinse and drain alfalfa, lentil or broccoli sprouts twic…

Tools & jigs

Drill guides, sanding blocks, soldering aids and workshop jigs.

20 mm bench dog for Festool MFT, 3D printable part

20 mm bench dog for Festool MFTA 20 mm bench dog 25 mm tall with a 0.1 mm taper so it drops into an MFT/3 hole and a 6 mm through-hole for a hold-down.

Angle grinder cutting guide fenceStraight cuts with a 115 mm angle grinder are hard to freehand, and this guide fence clamps to the workpiece and gives the guard a straight edge to ride along.

Angle-grinder cutting stand 115 mm, 3D printable part

Angle-grinder cutting stand 115 mmA stand that holds a 115 mm angle grinder at 90 degrees for chopping 20 mm tube, with a 40 mm vise and a 6 mm pin hinge.

AnkerMake M5C filament runout funnel, 3D printable part

AnkerMake M5C filament runout funnelA funnel that guides a new 1.75 mm end into the M5C PTFE inlet after a runout so you do not dismantle the head.

Bambu Lab A1 AMS Lite PTFE guide clip, 3D printable part

Bambu Lab A1 AMS Lite PTFE guide clipA clip that holds four 4 mm PTFE tubes in a tidy arc above a Bambu Lab A1 AMS Lite so they do not kink at the hub.

Bambu Lab A1 mini AMS Lite riserA 30 mm riser that lifts an AMS Lite above an A1 mini so the PTFE path is a gentle arc instead of a kink.

Bambu Lab A1 mini poop chute and waste binA chute and bin that catch the filament purge from a Bambu Lab A1 mini during colour changes so it does not pile up behind the machine.

Bambu Lab build plate scraper handle with replaceable bladeA comfortable scraper for lifting stubborn prints off a Bambu Lab X1C, P1S or A1 textured PEI plate, using a standard 100 mm plastic paint scraper blade or a…

Bambu Lab H2D AMS HT spool restA rest that parks an AMS HT spool (about 200 mm) beside an H2D so a fifth material is not on the floor.

Bambu Lab P1S AMS desiccant boxA box that sits in a P1S AMS slot and holds 50 g of desiccant with a 0.4 mm vent grid so the official bag is not the only dryer.

Bambu Lab P1S poop-chute extension bin, 3D printable part

Bambu Lab P1S poop-chute extension binAn extension that carries P1S purge poop 80 mm further forward into a 90 × 70 × 50 mm bin so it does not pile against the door.

Bambu Lab X1C AMS PTFE guide clipA clip that holds four 4 mm PTFE tubes in a tidy arc above an X1C AMS so they do not kink at the hub.

Bench-cookie set 60 mm non-slip, 3D printable part

Bench-cookie set 60 mm non-slipFour 60 × 12 mm bench cookies with a 2 mm TPU pad recess on each face so a workpiece stays put for sanding.

Bicycle chain wear indicator checker toolA go/no-go chain checker for Shimano, SRAM and KMC chains that measures elongation over ten links (127 mm nominal).

Bladed spoke holder tool for wheel truingAero spokes such as Sapim CX-Ray (2.2 x 0.9 mm) and DT Aerolite twist when you turn the nipple, so a holder is essential during wheel building and truing.

Bosch L-BOXX 102 bit insertAn insert that holds 40 bits in an L-BOXX 102 (about 357 × 316 mm) on 7 mm rails so they replace the foam.

Center finder marking gaugeA center finder lays two angled legs against the edges of a board so a pencil dropped through the middle hole scribes a line exactly down the center, whateve…

Chain-wear hook 0.5 and 0.75 percentA hook that reads 0.5 and 0.75 percent chain wear on 11–13 speed chains, 2 mm thick with labelled ends.

Chisel edge-guard set 6, 12, 19 and 25 mm, 3D printable part

Chisel edge-guard set 6, 12, 19 and 25 mmFour snap-on edge guards for bench chisels, 6–25 mm, 1 mm TPU walls and a 0.4 mm lip over the bevel.

Creality K1C poop deflector binA deflector that sends K1C purge off the right side into a 100 × 60 × 45 mm bin instead of onto the bed heater wires.

Crosscut-sled runner for 19 mm mitre slots, 3D printable part

Crosscut-sled runner for 19 mm mitre slotsA 19 × 10 × 400 mm runner that fits European 19 mm mitre slots with 0.1 mm side shims you snip to tune.

DeWalt TOUGHSYSTEM 2.0 bit railsRails that drop into a TOUGHSYSTEM 2.0 DS150 and hold 40 bits on 7 mm slots so they replace the foam.

DeWalt TSTAK II impact-driver insertAn insert that holds a 20V impact and two batteries in a TSTAK II box (about 330 × 310 mm) so the tool does not rattle.

Digital caliper depth base attachmentMost digital calipers have a thin depth rod that rocks on the edge of a hole, giving inconsistent readings.

Disc brake pad spacer for Shimano and SRAM calipersThe little plastic spacer that stops hydraulic brake pads closing when the wheel is out is always the first thing lost from a bike bag.

Dowel centre-finder set 6, 8 and 10 mm, 3D printable part

Dowel centre-finder set 6, 8 and 10 mmThree centre-finders that mark matching dowel holes: 6, 8 and 10 mm bodies with a 1.5 mm centre pin.

Dowel drilling guide jigFor dowel joints the two mating holes must line up exactly, and this self-centering guide makes that repeatable.

Dremel 4000 plunge router base with depth stopA small router base that threads onto the nose of a Dremel 4000, 3000 or 8220 so the tool can cut inlays, dados and hinge recesses with a 3.2 mm shank bit.

Drill depth-stop collar setA drill depth-stop collar slides onto a twist bit and stops the chuck from driving deeper than you want, so dowel holes, hinge cups and pilot holes all end a…

Drill-press vice jaw pads 100 mm, 3D printable part

Drill-press vice jaw pads 100 mmA pair of 100 × 25 × 8 mm jaw pads with a 4 mm V-groove for round stock and 2 mm through-holes matching a typical 100 mm drill-press vice.

Dyson V15 Detect Absolute bin-empty standA stand that holds a V15 Detect Absolute over a bin at 40 degrees so the cyclone empties without a dust cloud in your face.

Elegoo Centauri Carbon purge bucket, 3D printable part

Elegoo Centauri Carbon purge bucketA 110 × 70 × 50 mm bucket that clips onto the Centauri Carbon's right rail and catches purge before it hits the carbon-fibre bed.

Elegoo Saturn resin vat drain stand and drip trayA tilted stand that holds the resin vat of an Elegoo Saturn 3, Saturn 2 or Saturn 8K at 60 degrees over a tray so leftover resin drains back into the bottle…

Ergonomic sanding block for hook-and-loop discsThis hand sanding block accepts the same 125 mm hook-and-loop discs you use on a random orbit sander, so leftover discs get a second life on edges and profiles.

F-style clamp pads 40 mm, 3D printable part

F-style clamp pads 40 mmSnap-on 40 mm pads for F-style clamps that spread the load on soft wood.

Fairphone 5 modular repair stand, 3D printable part

Fairphone 5 modular repair standA bench stand that holds a Fairphone 5 (about 162 × 76 × 9.6 mm) face-down at 20 degrees so you can swap the battery, cameras or USB-C port without the phone…

Festool Domino DF 500 offset spacer set for shelf jointsA set of stepped spacers that sit under the fence of a Festool Domino DF 500 so mortises land at a fixed offset from the edge for shelf pins, drawer dividers…

Festool MFT 20 mm dog-rail stopA stop that drops into two 20 mm MFT holes and gives a 120 mm fence for crosscuts so a board does not walk.

Festool Systainer3 L 337 sander insertAn insert that holds an ETS 150 or RTS 400 plus paper in a Systainer3 L 337.

Festool Systainer3 SYS-MIDI bit insertAn insert that holds 50 bits and a Centrotec chuck in a SYS-MIDI so they replace the foam.

Flashforge Adventurer 5M Pro filament guide, 3D printable part

Flashforge Adventurer 5M Pro filament guideA bowden guide that lifts filament off the Adventurer 5M Pro's top spool so it does not rub the lid.

FNIRSI HS-01 iron standA stand that parks an HS-01 at 40 degrees with a 10 mm wool well.

Glue bottle stand with roller applicator holderWood glue bottles stored upright form a crust in the nozzle, while a bottle stored tip-down dispenses instantly.

Headset bearing press drift set for 1 1/8 inch steererA pair of stepped drifts that turn an M8 threaded rod, two nuts and washers into a headset bearing press for integrated and zero-stack headsets.

Helping-hands PCB vise 80 mm, 3D printable part

Helping-hands PCB vise 80 mmA small vise with 80 mm jaws and a 6 mm ball joint that holds a PCB at any angle.

Hex bit holder with magnet trayA compact holder keeps 1/4 inch hex screwdriver bits sorted by type and within reach on the bench.

Labeled socket organizer railLoose sockets in a drawer cost minutes on every job; a rail with sized posts keeps a 1/2 inch drive set in order and shows the size on each post.

Makita 18V LXT drill depth stop dust collector cupA clear dust cup that slides over a masonry or wood bit on a Makita DHP484 or DHP486 18V LXT drill, sets the drilling depth and catches the debris before it…

Makita MAKPAC Type 1 bit caddyA caddy that fills a MAKPAC Type 1 (about 395 × 295 × 70 mm) with 40 impact bits on 7 mm rails.

Makita MAKPAC Type 3 jigsaw insertAn insert that holds an 18V jigsaw plus blades in a MAKPAC Type 3 (about 395 × 295 mm) so the shoe does not rattle.

Milwaukee Packout Compact driver-bit caddyA caddy that drops into a Packout Compact Organizer and holds 30 impact bits on 7 mm rails so they do not rattle in the official foam.

Milwaukee Packout M18 battery railA rail that mounts four M18 batteries on the side of a Packout rolling box so spares are not in a tote.

Oscillating-tool depth-stop collar, 3D printable part

Oscillating-tool depth-stop collarA collar that clamps on a 10 mm oscillating-tool neck and presents a 40 mm fence so plunge cuts stop at a set depth.

Pinecil V2 stand with brass-tip wellA stand that parks a Pinecil V2 at 45 degrees with a 10 mm brass-wool well and a 8 mm tip rack for three tips.

Pipe-clamp jaw pads for 3/4 inch pipe, 3D printable part

Pipe-clamp jaw pads for 3/4 inch pipeJaw pads that slip over 3/4 inch pipe-clamp heads, 50 × 30 mm faces with 1 mm TPU.

Plane-blade sharpening jig 50 mm, 3D printable part

Plane-blade sharpening jig 50 mmA 50 mm honing jig that holds a plane iron at 25 or 30 degrees with a 4 mm clamp bar.

Pocket-hole drilling jig blockThis jig guides a stepped 9.5 mm pocket-hole bit at the standard 15 degree angle into the edge of 18 mm sheet goods, for pocket-screw cabinet joints without…

Pocket-hole plug cutter guide 9.5 mm, 3D printable part

Pocket-hole plug cutter guide 9.5 mmA guide that holds a 9.5 mm plug cutter square to a board edge so Kreg-style plugs come out round.

Presta valve core remover tool keychainA tiny keychain tool that unscrews the removable core from a Presta valve on Stan's, Muc-Off or Peaty's tubeless valves so you can inject sealant or clear a…

Prusa CORE One purge bucketA bucket that sits under a CORE One purge chute and holds 80 × 50 × 40 mm of waste so poop is not on the desk.

Prusa CORE One spool-holder drybox riser, 3D printable part

Prusa CORE One spool-holder drybox riserA riser that lifts a Prusa CORE One side spool 40 mm so a 2 L drybox can sit under the PTFE inlet.

Prusa MK4 filament runout guide with PTFE fittingA guide arm that bolts to the top of the Prusa MK4 or MK3.9 frame and routes filament from the spool holder into the Nextruder through a short length of PTFE…

Prusa MK4S print-sheet wall rackA rack that hangs three MK4S 250 × 210 mm sheets on a wall so they are not stacked on the printer.

Rotor-truing fork 160 to 203 mmA fork that parks in a 160–203 mm caliper mount and presents two 1 mm pads so you can true a rotor in the frame.

Router circle-cutting jigA trammel jig lets a trim router cut clean circles and arcs by pivoting around a pin.

Router edge-guide clamp-on fence, 3D printable part

Router edge-guide clamp-on fenceA clamp-on fence that turns any palm router into an edge guide with a 120 mm face and a 20–40 mm clamp for the base.

Sanding block for 93 mm 1/3 sheets, 3D printable part

Sanding block for 93 mm 1/3 sheetsA 93 × 185 × 40 mm block that wraps a 1/3 sheet with 2 mm side clips.

Shelf pin drilling template, 32 mm systemAdjustable shelving needs columns of 5 mm holes at precise 32 mm spacing, and this template makes that reliable with a hand drill.

Shimano flat-mount bleed blockA block that keeps Shimano flat-mount pistons from popping out during a bleed, 22 × 10 × 8 mm.

Shimano SPD cleat alignment jig for cycling shoesA jig that holds a Shimano SM-SH51 or SH56 SPD cleat at a repeatable fore-aft position and angle while you tighten the two M5 bolts (14 mm apart), so a new p…

Shop-vac wide floor nozzle 300 mm, 3D printable part

Shop-vac wide floor nozzle 300 mmA 300 mm floor nozzle for a 35 mm shop-vac cuff with a 2 mm mouth and 8 mm wheels on 4 mm pins.

Soldering fume-arm 50 mm hose clamp, 3D printable part

Soldering fume-arm 50 mm hose clampA bench clamp that holds a 50 mm extractor hose 200 mm above a soldering iron rest.

Soldering helping hands baseA weighted base with sockets for flexible gooseneck arms keeps small boards and wires positioned while you solder.

Spray can trigger handlePressing an aerosol nozzle for long paint sessions cramps your finger and gives uneven coverage.

SRAM Level bleed blockA block that holds SRAM Level pistons in during a bleed, 24 × 12 × 8 mm.

Steam Deck OLED microSD eject toolA tool that ejects a Steam Deck OLED microSD without a paperclip, 60 × 8 × 2 mm with a 1.2 mm tip and a 12 mm finger hole.

Tap alignment guide blockStarting a thread tap perfectly square is the difference between a usable hole and a ruined part.

Tesla Model 3 Aero wheel hub cap removal toolA hooked lever that pops the 18 inch Aero wheel covers off a Tesla Model 3 without gouging the alloy underneath.

TS101 iron stand with brass wellA stand that holds a TS101 at 45 degrees with a 12 mm brass-wool well and a 14 mm USB-C slot for the cable.

Utility-knife blade disposal tin, 3D printable part

Utility-knife blade disposal tinA 70 × 40 × 20 mm tin with a 2 mm one-way slot that swallows snap-off and trapezoid blades and does not give them back.

Voron 2.4 belt tension gauge and idler spacing cardA credit card sized gauge for tuning a Voron 2.4, Trident or 0.2 build: one edge is a 110 Hz reference comb for checking AB belt tension by plucking, the oth…

Voron Trident belt-tension gauge card, 3D printable part

Voron Trident belt-tension gauge cardA 1.2 mm card that reads Voron Trident A/B belt tension by how far a 6 mm span deflects to printed marks at 80, 90 and 100 Hz equivalents.

Replacement parts

Re-created parts for appliances, furniture and gadgets.

Bambu Lab X1C purge wiper replacement bladeA replacement for the small nozzle wiper blade at the rear of the Bambu Lab X1 Carbon and P1S, which wears a groove after a few hundred hours and stops clean…

Blender lid center capThe removable center cap of a blender lid gets lost or cracked, and without it every smoothie splashes the counter.

Breville Bambino Plus drip-tray gridA replacement grid for a Breville Bambino Plus drip tray (about 200 × 90 mm) with 4 mm bars on 8 mm centres so cups sit level after the official grid rusts.

Breville Smart Grinder Pro hopper-lid clipA clip that keeps a Smart Grinder Pro hopper lid (about 110 mm) from rattling off when the grinder is on.

Cabinet hinge mounting plate replacementConcealed cabinet hinges clip onto a small mounting plate screwed to the carcass, and when the plate cracks the door sags or falls off.

CamelBak bite valve dust cover cap replacementThe hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit.

Combination-square head replacement 300 mm, 3D printable part

Combination-square head replacement 300 mmA replacement head for a 300 mm combination square with a 1 mm rule slot, a 45 degree face, and an M5 lock.

Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.

Creality Ender 3 V3 bed leveling knob replacementA replacement thumbwheel for the bed leveling screws on a Creality Ender 3 V3 SE and KE, Ender 3 V2 and Neo, which use M4 screws with a knurled 34 mm plastic…

Curtain track glider setCurtain track gliders crack and stop sliding, leaving curtains bunched at one end, and matching the profile of an older track is rarely possible from a shop.

DeWalt TOUGHSYSTEM DS150 latch guardA guard that sits over a DS150 metal latch so it does not catch on a truck liner.

DeWalt TSTAK lid latch clip replacementA replacement side latch for DeWalt TSTAK II, IV and VI cases, whose clear polycarbonate latches crack at the pivot when the case is carried by one handle.

Digital-caliper SR44 battery-door replacement, 3D printable part

Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.

Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.

Dyson Purifier Hot+Cool castor stopA pair of wedges that stop a Purifier Hot+Cool (HP07 / HP09) walking across a polished floor when oscillation is on.

ecobee Smart Thermostat Enhanced wall shim, 3D printable part

ecobee Smart Thermostat Enhanced wall shimA 6–12 mm stepped shim that sits behind an ecobee Smart Thermostat Enhanced (about 109 mm round) so the unit sits flush on a tiled wall.

Eheim filter intake pipe suction cup clip replacementA replacement clip that holds the intake and outflow pipes of an Eheim Classic or Professionel canister filter against the aquarium glass when the original c…

Extension cord reel crank handleCable reels are wound by a folding crank handle whose plastic knob and pivot break long before the cable does.

File-handle replacement for a 4 mm tangA 110 mm handle with a 4.2 mm tapered bore that a needle-file tang drives into, and a 16 mm palm swell.

Framework Laptop 16 expansion-bay coverA blank cover for a Framework 16 expansion bay when the GPU module is out, 150 × 20 × 8 mm with the official clips.

Fridge door shelf bracket supportRefrigerator door shelves hang on small plastic supports that go brittle in the cold and crack under a full milk carton.

Headset spacer set for 1 1/8 inch 28.6 mm steererStack-height spacers for a 1 1/8 inch fork steerer, 28.6 mm nominal, in 2.5, 5, 10 and 15 mm thicknesses so you can dial in bar height on a Canyon, Trek or S…

Hose reel side cover latchWall-mounted hose reels keep their spool cover on with a rotating latch that fatigues in sunlight and snaps, letting the cover flap loose.

IKEA ALEX drawer-stop clip pair, 3D printable part

IKEA ALEX drawer-stop clip pairA pair of clips that stop an ALEX drawer from rolling all the way out on a slightly uneven floor.

IKEA Bekvam step stool anti-slip foot replacementA replacement foot for the IKEA Bekvam step stool that covers the raw end of each leg when the original plastic glide falls off or the wood starts scratching…

IKEA BESTÅ 30 mm leg riserA 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit.

IKEA BESTÅ glass-door soft bump, 3D printable part

IKEA BESTÅ glass-door soft bumpA 8 mm silicone-style bump that sticks on a BESTÅ glass door so it does not slap the frame.

IKEA BESTÅ glass-shelf 5 mm pinA 5 mm pin with a 10 mm cup that holds a BESTÅ glass shelf so a lost official pin is not a wobbly bottle.

IKEA BILLY OXBERG door soft bumpA bump that sits on a BILLY OXBERG glass or panel door so it does not rattle against the bookcase.

IKEA Billy shelf pin replacement for 5 mm holesA replacement shelf support for the IKEA Billy bookcase, Hemnes and Ivar, which use 5 mm holes and lose pins every time you move house.

IKEA BROR caster brake wedgeA wedge that chocks a BROR 100 mm caster so the trolley does not roll when you open a drawer.

IKEA EKET wall-mount cover capA cap that hides the EKET wall-rail screws (about 12 mm heads) so a hanging cube looks finished.

IKEA Hemnes drawer knob replacement with M4 screwA replacement knob for IKEA Hemnes and Malm drawers that reproduces the round 25 mm shape when one cracks or goes missing from a second-hand dresser.

IKEA HEMNES shoe-cabinet tilt stopA stop that keeps a HEMNES shoe cabinet flap (about 890 mm wide) from dropping past 15 degrees so shoes do not spill.

IKEA IVAR 6 mm shelf-pin replacementA 6 mm pin that replaces a lost IVAR metal pin so a pine shelf sits level in the 30 or 50 cm side unit.

IKEA IVAR caster adapter plateA plate that lets you bolt a 40 mm caster under an IVAR side unit so the pine shelf becomes a rolling cart.

IKEA KALLAX 40 mm foot riser with caster boss, 3D printable part

IKEA KALLAX 40 mm foot riser with caster bossA 40 mm riser that replaces a KALLAX foot and adds a 10 mm boss for a plate caster so the unit rolls.

IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.

IKEA MALM drawer soft-close bumperA bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass.

IKEA MALM dressing-table mirror tilt stopA wedge that sits in the MALM dressing-table mirror hinge so the glass cannot flop forward.

IKEA METOD hinge spacer 2 mm, 3D printable part

IKEA METOD hinge spacer 2 mmA 2 mm spacer that sits behind a METOD hinge plate so a warped cabinet still closes.

IKEA PAX BERGSBO door soft bumpA bump that sits on a PAX BERGSBO panel door so two sliding or hinged doors do not clap.

IKEA PAX KOMPLEMENT 5 mm shelf pinA 5 mm shelf pin that replaces a lost KOMPLEMENT pin in a PAX frame so a 50 or 75 cm shelf sits level.

IKEA POÄNG cushion tie clipA clip that replaces a snapped POÄNG cushion tie so the seat pad stays on the frame.

IKEA POÄNG foot felt-pad replacementA felt-faced pad that replaces a worn POÄNG foot (about 30 × 20 mm) so the birch runners stop scratching a wood floor.

IKEA POÄNG ottoman felt glidesGlides that replace worn POÄNG ottoman feet (about 28 × 18 mm) so the stool slides without scratching.

IKEA SEKTION drawer soft-close clip, 3D printable part

IKEA SEKTION drawer soft-close clipA replacement clip that holds a SEKTION drawer damper on the runner, 18 × 10 × 8 mm with a 2 mm hook.

IKEA SKOGSTA bench felt foot capsCaps that slip over SKOGSTA bench legs (about 45 × 45 mm acacia) so the bench does not dent a wood floor.

IKEA SKOGSTA stool foot-cap setCaps for SKOGSTA stool legs (about 35 × 35 mm) so the shorter acacia stool does not mark a floor.

IKEA SMÅSTAD bin-lid soft bumpA bump that sits under a SMÅSTAD bench-bin lid so it does not slam on little fingers.

IKEA SMÅSTAD drawer-stop clipA clip that keeps a SMÅSTAD kids drawer from being pulled all the way out, 22 × 14 × 10 mm with a 3 mm lip that grabs the official runner.

IKEA TROFAST frame 35 mm caster riserA 35 mm riser that adds a 40 mm caster under a TROFAST frame so the unit rolls to the next room.

Ironing board leg end capIroning board feet wear through and the bare steel tube scratches floors and slides on tile.

Kärcher K4 trigger gun holder clip replacementA replacement for the clip on the back of a Kärcher K4 or K5 pressure washer that holds the trigger gun during storage and often snaps off in cold weather.

Kuat NV bike rack wheel tray end capThe plastic caps on the ends of Kuat NV and Sherpa wheel trays crack in the cold and let water into the extrusion.

Lawn mower height adjuster leverPush mowers set cutting height with a plastic lever that engages notched positions, and the pawl tooth wears until the wheel drops mid-mow.

Makita MAKPAC latch replacement clipA clip that replaces a cracked MAKPAC lid latch so the box still closes.

Manfrotto Befree centre-column hookA hook that hangs a bag from a Befree centre column so the tripod stays put in wind, 12 mm snap.

Marking-gauge wheel-fence replacement, 3D printable part

Marking-gauge wheel-fence replacementA 40 mm fence that replaces a cracked marking-gauge head, 20 mm stem bore with an M5 pinch, and a 0.4 mm wheel slot.

Milwaukee Packout tool box latch replacementA replacement for the front latch on Milwaukee Packout tool boxes and organizers, which snaps when the box is dropped on the latch face.

Nanoleaf Shapes 10 mm corner spacer, 3D printable part

Nanoleaf Shapes 10 mm corner spacerA 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks.

Ortlieb QL2.1 pannier hook insert replacementOrtlieb Back-Roller and Sport-Roller panniers use QL2.1 hooks with small plastic inserts that adapt the hook to rack tubing of 8, 10, 12 or 16 mm; the insert…

Osprey backpack sternum strap buckle replacementThe sliding sternum strap buckle on Osprey Talon, Stratos and Atmos packs (and similar Deuter and Gregory ones) rides along a webbing rail and cracks after a…

Osprey Talon sternum-magnet clipA replacement magnet clip for an Osprey Talon / Tempest sternum strap, 20 × 12 mm with a 2 mm webbing slot.

Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.

Roomba j9+ cliff-sensor shim, 3D printable part

Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.

Salomon ADV Skin flask-valve capA cap that covers an ADV Skin flask bite valve in a bag so it does not leak, 18 mm snap.

Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.

Sliding wardrobe door roller carriageSliding wardrobe doors ride on small roller carriages that split along the axle after years of use, making the door drop and scrape.

Sofa leg replacement foot, M8 studA missing sofa foot leaves the frame tilted and scratches the floor.

Sony a7C II cold-shoe capA cap that covers the a7C II hot shoe so the contacts stay clean in a bag.

Stroller wheel hub capA lost hub cap lets grit into a stroller wheel bearing and exposes a sharp axle end, and manufacturers seldom sell the cap alone.

Stryd foot-pod shoe-clip spare, 3D printable part

Stryd foot-pod shoe-clip spareA spare clip that holds a Stryd running pod (about 28 × 25 × 10 mm) on a lacing pattern 8–14 mm wide.

Suitcase wheel housing replacementA broken corner wheel housing turns a good suitcase into landfill, yet the part is just a bracket that holds a 50 mm wheel on a 6 mm axle.

SwitchBot Curtain 3 rod clamp for 28 mm poles, 3D printable part

SwitchBot Curtain 3 rod clamp for 28 mm polesA replacement clamp that lets a SwitchBot Curtain 3 ride a 28 mm wooden pole instead of the IKEA 25 mm it shipped with.

Tape-measure 25 mm belt-clip replacement, 3D printable part

Tape-measure 25 mm belt-clip replacementA replacement belt clip for a 5–8 m tape with a 25 mm hook and two 3.5 mm holes matching Stanley / Komelon patterns.

Thule EasyFold wheel-tray end capA replacement end cap for a Thule EasyFold wheel tray, 40 × 25 mm with the stock 4 mm rib.

Thule ProRide wheel-strap hookA hook that parks a ProRide wheel strap (about 20 mm webbing) on the tray so it does not slap the car.

Toy car wheel and axle replacementRide-on and push-along toy cars lose wheels when the axle cap or hub snaps, and spare parts are rarely sold separately.

Track-saw splinter-guard replacement strip, 3D printable part

Track-saw splinter-guard replacement stripA 1400 mm splinter-guard strip in 200 mm sections that clip onto a Festool / Makita style track's 4 mm T-slot.

Vacuum cleaner hose end cuffThe cuff where a vacuum hose meets the wand or floor head cracks from years of twisting, and once it splits the suction leaks away.

Washing machine door handle replacementFront-loader door handles snap at the pivot lugs after years of use, and manufacturers frequently charge a premium for a small plastic lever.

Window blind tilt wand clipThe small plastic hook that connects a venetian blind tilt wand to the headrail is often the first thing to break, leaving the slats stuck.

Window handle with 7 mm square spindleTilt-and-turn and casement windows use an espagnolette handle on a 7 mm square spindle; when the original breaks the window is stuck.

Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.

Hobby & gaming

Dice towers, miniature bases, card holders and controller stands.

8BitDo Ultimate 2 charging-dock riserA 15 mm riser under an Ultimate 2 dock so a thicker aftermarket grip still seats on the pogo pins.

8BitDo Ultimate controller charging dock riserA riser that tilts the 8BitDo Ultimate Bluetooth or Ultimate 2C charging dock back 15 degrees and lifts it 40 mm off the desk so the controller stands proud…

Apple Vision Pro 2 Light Seal stand, 3D printable part

Apple Vision Pro 2 Light Seal standA desk stand that holds Apple Vision Pro 2 (about 200 mm wide) on its Light Seal so the displays stay off the desk.

Apple Vision Pro battery-pack belt clipA clip that parks the Vision Pro battery pack on a 40 mm belt so the cable does not yank the headset, 70 × 40 mm saddle.

Apple Vision Pro travel battery pocketA pocket that straps the Vision Pro battery pack (about 70 × 40 × 20 mm) to the official travel case so the cable does not yank the headset in a bag.

ASUS ROG Ally charging stand with angled cradleAn angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk whi…

ASUS ROG Ally X grip shellA two-part shell that thickens Ally X grips by 8 mm without covering vents or the rear buttons.

AYANEO KUN travel standA folding stand that holds an AYANEO KUN at 50 degrees with a 14 mm USB-C slot, two pieces on a 6 mm pin.

Board game token tray with scoopsToken trays sort cardboard chits and wooden cubes into compartments with sloped scoop bottoms so you can pick pieces up with a fingertip.

Bose QuietComfort Ultra headphones hookA hook that hangs QC Ultra headphones (about 170 mm across the cups) under a desk so the headband is not on a chair.

Boss RC-5 pedalboard riserA 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses.

Card deck box with sliding lidA deck box protects sleeved trading cards during transport and stops the stack spilling in a backpack.

Citadel paint pot rack for 26 mm pots, 3D printable part

Citadel paint pot rack for 26 mm potsA three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…

Cold shoe mount adapter for cameraA cold shoe adapter lets you bolt a microphone, light or monitor onto a camera cage or tripod that only offers a 1/4 inch thread.

D&D dice tower shaped like a dungeon turret, 3D printable part

D&D dice tower shaped like a dungeon turretA crenellated stone turret that doubles as a dice tower for Dungeons & Dragons, Pathfinder and Warhammer sessions.

Desk clamp headset hangerA headset hanger clamps to the edge of a desk and holds a gaming headset off the surface where it would otherwise gather cables and crumbs.

Desktop microphone shock mount ringA shock mount isolates a condenser microphone from desk thumps and keyboard rumble that travel up the arm.

Dice tower with catch trayA dice tower randomises rolls and keeps dice from flying off the table, which matters when a game night involves drinks and miniatures.

DJI Mini 5 Pro prop holderA holder that clips Mini 5 Pro props in pairs so they do not bend in a bag, 80 × 20 × 12 mm.

DJI Neo 2 pocket launch padA 120 mm pad that gives a Neo 2 a clean launch off gravel with 8 mm lips.

DualSense Edge back-paddle restA rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.

Flydigi Vader 4 Pro display standA stand that holds a Vader 4 Pro at 25 degrees with the RGB face visible and a 14 mm USB-C slot.

Funko Pop shelf riser three tier for boxed figures, 3D printable part

Funko Pop shelf riser three tier for boxed figuresA stepped riser that lifts the back rows of boxed Funko Pop figures so all three rows are visible on a normal bookshelf.

Game controller stand for two padsA controller stand keeps two gamepads upright on a shelf instead of sliding around in a drawer, and it stops the analogue sticks getting crushed.

GameSir G8 Galileo phone-stopA pair of stops that keep a 70–85 mm phone from sliding out of a G8 Galileo, 2 mm TPU lips.

Guitar pick holder with headstock clipPicks vanish constantly, and a holder that clips onto the headstock keeps four within reach mid-song.

Guitar wall hanger with padded yokeA wall hanger lifts a guitar off the floor and out of the way of feet and vacuum cleaners.

Gunpla HG action base adapter with 3 mm peg, 3D printable part

Gunpla HG action base adapter with 3 mm pegA small saddle that lets High Grade Gunpla kits without a dedicated stand hole sit on a Bandai Action Base 4 or 5 arm.

Hexagonal dice vault with lidA dice vault stores a full seven-piece polyhedral set in a compact hex body with a friction-fit or threaded lid.

Hot Wheels Premium wall ledge for 10 cardsA 400 mm ledge with a 2 mm slot that holds 10 Premium blister cards at 10 degrees.

Hot Wheels wall display rack for carded cars, 3D printable part

Hot Wheels wall display rack for carded carsA wall rack for unopened Hot Wheels and Matchbox mainlines still on their blister cards, which measure 108 x 165 mm with the blister sticking out about 35 mm.

Kindle Colorsoft one-hand page-turn grip, 3D printable part

Kindle Colorsoft one-hand page-turn gripA palm grip that clips onto a Kindle Colorsoft (about 175 × 124 × 8 mm) so you can hold it one-handed and tap the page-turn zone with the thumb.

LeapFrog LeapReader pen standA stand that parks a LeapReader pen in a 14 mm well with a 40 mm book rest.

LEGO minifig wall bar for 36 figuresA 300 mm bar with 36 studs in two rows that hangs minifigs by the legs.

LEGO minifigure display shelf for 24 figures, 3D printable part

LEGO minifigure display shelf for 24 figuresA stepped, wall-hanging shelf with four tiers of six LEGO minifigures each, every figure standing on a pair of real 4.8 mm studs at the 8 mm LEGO pitch so it…

Leica Q3 thumb grip with Arca footA thumb grip that bolts to a Q3 (about 130 × 80 × 93 mm) with an Arca-swiss foot so the camera sits on a travel tripod without a separate plate.

Lenovo Legion Go 2 kickstand extensionAn extension that adds 20 mm to a Legion Go 2 kickstand so the screen sits at 60 degrees on a couch.

Logitech G Pro X 2 headset hookA hook that hangs a G Pro X 2 (about 190 mm across the cups) under a desk so the boom is not on the keyboard.

Magnetic miniature movement trayA movement tray lets you slide a whole unit of miniatures across the board in one motion.

Meta Quest 3 head strap battery pack mountA counterweight cradle that straps a slim USB power bank to the rear of a Meta Quest 3 or Quest 3S standard head strap, extending play time and balancing the…

Meta Quest 3S Elite strap wall dock, 3D printable part

Meta Quest 3S Elite strap wall dockA wall dock that holds a Quest 3S with the Elite battery strap hanging on a 40 mm hook and the headset sitting in a 180 mm wide cradle.

Model kit sprue cutter holder and parts trayBuilding plastic model kits means dozens of tiny parts and a few sharp tools that roll off the bench.

Modular board game insert binsInsert bins fill a game box so components stay sorted and set-up drops from ten minutes to two.

MTG Commander deck box for 100 sleeved cards, 3D printable part

MTG Commander deck box for 100 sleeved cardsA hinged deck box sized for a full 100-card Magic: The Gathering Commander deck in double sleeves.

Nintendo Switch 2 game-card display rail 24A 280 mm rail that displays 24 Switch / Switch 2 game cards in 22 × 4 mm slots at 15 degrees.

Nintendo Switch 2 Joy-Con charging grip stand, 3D printable part

Nintendo Switch 2 Joy-Con charging grip standA desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open.

Nintendo Switch 2 Joy-Con wall hooksA pair of hooks that hang Switch 2 Joy-Con (about 110 × 30 × 25 mm each) on a wall so they are not in a bowl.

Nintendo Switch 2 Pro Controller display standA low cradle that holds a Nintendo Switch 2 Pro Controller (or the original Switch Pro Controller, about 152 x 106 x 60 mm) upright on a shelf with the face…

Nintendo Switch 2 Pro Controller standA stand that parks a Switch 2 Pro Controller (about 160 × 110 × 60 mm) at 20 degrees with a 14 mm USB-C slot so it charges on a shelf.

Nintendo Switch game cartridge case for 24 cardsA slim two-part case with a sliding lid that holds 24 Nintendo Switch game cards in a 6 by 4 grid.

Nintendo Switch Joy-Con comfort grip for single controllerA palm-filling grip that a single Joy-Con slides onto for sideways two-player sessions in Mario Kart or Smash.

Paint bottle rack for dropper bottlesDropper-bottle paints in the 17 ml size are about 26 mm in diameter and 70 mm tall, and a tiered rack keeps labels visible and bottles off the work surface.

Pedaltrain Nano Plus power-supply mountA mount that hangs a 9 V brick under a Nano Plus with two 6 mm zip-tie slots matching the rail.

PlayStation 5 Pro vertical-stand feetA pair of 80 × 40 × 12 mm feet that widen a PS5 Pro vertical stand so it does not rock on carpet.

PlayStation Portal desk stand with cable channelA stand for the PlayStation Portal remote player that supports the grips on either side of its 8 inch screen and tilts it back 20 degrees for a bedside or de…

Pokémon ETB deck-box insertAn insert that turns an Elite Trainer Box into two 80-card deck wells plus a 20 mm token tray.

Pokémon TCG toploader wall display rack, 3D printable part

Pokémon TCG toploader wall display rackA wall rack that shows twelve Pokémon TCG cards in standard 3 x 4 inch toploaders (76 x 102 mm, about 2 mm thick for a 35 pt sleeve) in three rows of four.

PS5 DualSense dual controller charging standA twin-bay stand for two PlayStation 5 DualSense or DualSense Edge controllers (160 x 66 x 106 mm) that holds them face-out with their USB-C ports aligned ov…

RC car body post extensionBody post extensions raise an RC car shell to clear larger tyres or a taller chassis, and the stock posts are rarely long enough.

RC car shock tower braceA shock tower brace spans the two upper shock mounts and stops the towers flexing or snapping during hard landings.

Round miniature bases with slotSlotted round bases hold metal or resin miniatures with a tab underneath, and buying them in odd sizes gets expensive.

Sony FX30 cage NATO-rail stopA stop that clips onto an FX30 cage NATO rail (about 50 mm) so a handle does not slide off.

Squishmallow display shelf 20 cmA 200 mm shelf with a 25 mm lip that keeps a medium Squishmallow from rolling off.

Steam Deck 2 travel kickstand with case lip, 3D printable part

Steam Deck 2 travel kickstand with case lipA clip-on kickstand for a Steam Deck 2 (about 300 × 120 × 50 mm) that still clips over a Jsaux or dbrand case.

Steam Deck 2 travel-dock cable blockA block that holds a USB-C hub and the Deck 2 charger in a 160 × 80 × 30 mm travel case with 0.4 mm clearance.

Steam Deck OLED clip-on kickstand for tabletop play, 3D printable part

Steam Deck OLED clip-on kickstand for tabletop playA removable kickstand that clips over the bottom edge of a Steam Deck LCD or OLED (298 x 117 x 49 mm) and props it at 60 degrees for docked-style play with a…

Steam Deck OLED dock stand with USB-C cutoutA desk stand that holds a Steam Deck OLED (298 x 117 x 49 mm) at a 15 degree lean while a USB-C hub or the official dock's cable stays plugged into the top p…

Steam Deck OLED front-plate standA stand that holds a Deck OLED (about 298 × 117 × 49 mm) by the front plate at 30 degrees so the kickstand is not the only option.

Strymon Iridium pedalboard riserA 15 mm riser for an Iridium so the jacks clear a packed board, 110 × 70 mm.

Toniebox 2 wall shelf with Tonie pegsA 220 mm shelf that holds a Toniebox 2 and six Tonies on 8 mm pegs.

Tripod phone clamp with quarter-inch threadA phone clamp turns any tripod into a video rig, and a printed one can be sized for a phone in a thick case that commercial clamps refuse.

Vallejo 17 ml dropper bottle tiered rack, 3D printable part

Vallejo 17 ml dropper bottle tiered rackA tiered rack for Vallejo Model Color and Game Color 17 ml dropper bottles, which are 27 mm across and about 65 mm tall, and equally at home with Army Painte…

Wall hook for headphones and cablesA wall hook parks a headset or pair of studio headphones next to the desk and keeps the cable coiled below it.

Wall-mounted SD card and battery holderCamera batteries and SD cards pile up fast, and a wall-mounted holder keeps charged batteries and empty cards separate from used ones.

Warhammer 40k 32 mm round base movement trayA skirmish movement tray that carries ten Warhammer 40,000 infantry on 32 mm round bases in two ranks of five, so a whole squad of Intercessors or Necron War…

Wingspan board game card and token insert, 3D printable part

Wingspan board game card and token insertA drop-in insert for the Stonemaier Wingspan base box (interior about 292 x 218 x 65 mm) that holds the 170 sleeved bird cards, bonus cards, food tokens, egg…

WLED hex-panel stand for six cells, 3D printable part

WLED hex-panel stand for six cellsA stand that holds a six-cell WLED hex (about 300 mm across) at 15 degrees with a 20 mm USB-C well in the base.

Xbox Elite Series 2 controller display standA display stand for the Xbox Elite Series 2 controller that shows off its rubberised grips and paddles while keeping it within reach of the console.

Xbox Elite Series 3 paddle standA stand that holds an Elite Series 3 without flattening the rear paddles, 30 mm clearance and a 14 mm USB-C slot.

Yoto Player Mini wall dockA wall dock that holds a Yoto Mini and four cards in 2 mm slots, 80 × 40 × 60 mm.

Garden & outdoor

Planters, hose guides, label stakes and bike accessories.

Apidura Expedition drybag roll clipA clip that keeps an Expedition drybag roll from unrolling, 40 mm jaws with a 2 mm TPU lip.

Bee hotel nesting block insertSolitary bees pollinate a garden all season and need only a block of tunnels to nest.

Black Diamond Spot 400 helmet clipA clip that puts a Spot 400 on a vented helmet without the official kit, 18 mm vent snap and a 25 mm lamp saddle.

Bosch Kiox 300 display sun hoodA 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon.

Brompton C Line front-carrier block coverA cover that keeps grit out of a C Line front-carrier block when the bag is off, 40 × 30 × 15 mm with a 2 mm snap.

Compost aerator tool headA compost heap breaks down faster when air gets into the middle, and this aerator head turns a broom handle into a plunging turner.

Cowboy Cruiser ST phone-pad riserA 15 mm riser under a Cowboy phone pad so a MagSafe case still sits flush on the stem.

Downspout splash diverterA downspout that empties straight onto the soil erodes a hole and splashes the wall.

Drip irrigation tube stakeDrip lines wander out of pots unless pinned, and this stake holds 4 mm micro tubing right at the plant base.

Garden hose nozzle holster for postSpray nozzles left on the lawn get run over by the mower; a holster on a fence post keeps one at hand next to the tap.

Garden tool handle clips for shed railRakes, hoes and spades lean in a corner until a clip system holds them upright by the handle.

Garmin Edge 1050 out-front mount 31.8 mmAn out-front mount for an Edge 1050 on a 31.8 mm bar with the quarter-turn head and a 20 mm GoPro boss underneath.

Garmin inReach Mini 2 sternum mountA mount that puts an inReach Mini 2 on a 25 mm sternum strap with the antenna up, 28 mm well and a 2 mm webbing slot.

Greenhouse glazing clipsAluminium greenhouses hold their 3 mm glass panes with W-shaped spring clips and Z-shaped overlap clips that disappear into the lawn every windy winter.

Hammerhead Karoo 3 out-front mountAn out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.

Jetboil Flash 2.0 pot-support ringA ring that lets a Flash 2.0 hold a non-Jetboil 1 L pot, 110 mm ID with three 8 mm tabs.

Jetboil fuel canister stabilizer stand for camping stoveA tripod foot that clips onto the base of a 100 g or 230 g isobutane canister so a Jetboil Flash, MiniMo or MSR PocketRocket does not tip on uneven ground.

Kuat NV 2.0 ratchet-handle hookA hook that parks an NV 2.0 ratchet handle so it does not swing into the tailgate, 16 mm snap.

MSR PocketRocket 2 110 g canister standA three-leg stand that widens a 110 g canister under a PocketRocket 2 so it does not tip a 1 L pot.

Outdoor tap frost coverA frozen outside tap can split the pipe behind the wall, and a snug cover traps air around it through winter.

Petzl Actik Core bike-helmet mountA mount that puts an Actik Core on a bike-helmet vent, 20 mm snap and the official 25 mm lamp plate.

Rad Power RadRunner basket spacerA 20 mm spacer pair that lifts a RadRunner rear basket so a fat 4 inch tyre does not rub.

Rain gauge with fence bracketKnowing how much rain fell overnight tells you whether to water, and a printed rain gauge costs less than a coffee.

Raised bed corner connectorTimber raised beds are quickest to build when the boards slot into corner connectors instead of being screwed at awkward angles.

Roborock Qrevo Master dock threshold rampA 22 mm ramp that lets a Qrevo Master climb a dock lip or room threshold the stock 20 mm Qrevo ramp does not clear.

Sea to Summit Spark footbox vent clipA clip that holds a Spark bag's footbox vent open on a humid night, 20 mm snap.

Seed starting tray with drainage cellsA modular seed tray gives each seedling its own cell so roots do not tangle and transplanting is painless.

Self-watering pot insert with wickA self-watering insert sits inside a standard pot and lets a wick draw water up from a reservoir, so plants stay hydrated during a week away.

Solar garden light ground stakeSolar path lights come with flimsy stakes that snap in dry soil or when a foot catches them, and once the stake is gone the light is useless.

Specialized Levo SL bottle-cage adapterAn adapter that moves a bottle cage 20 mm off a Levo SL downtube so a 750 ml bottle clears the motor.

Tent ceiling lantern hook for Black Diamond MojiA double-ended hook that hangs a Black Diamond Moji, Goal Zero Crush Light or any small lantern from the fabric loop in a tent ceiling, low enough to read by…

Tent guy line tensioner for 3 mm reflective cordA three-hole line tensioner for the 2 to 3 mm reflective guy cord used on MSR, Big Agnes, Nemo and Decathlon Quechua tents, replacing the sliders that snap i…

Tent stake puller hook for MSR Groundhog stakesA palm-sized hook that slides under the notched head of an MSR Groundhog, Mini Groundhog or any Y-beam stake and pulls it out of packed ground without bendin…

Tern GSD seatpost phone mountA mount that clamps a 30.9 mm GSD seatpost and holds a 70–85 mm phone for the rear-facing kid cam.

Trek Rail Bosch charger holsterA garage holster that parks a Bosch 4A charger and the Rail's charge-port cap on a 4.5 mm hole pair.

Tube bird feeder with perchesA tube feeder dispenses seed slowly through small ports and keeps most of it dry.

VanMoof S5 rear-fender mudflapA 120 × 80 mm mudflap that clips onto an S5 rear fender so the motor does not get a stripe.

Writable plant label stakesWooden labels rot and rubber-banded tags fall off; a printed stake with a recessed writing panel lasts several seasons and takes a pencil or paint marker.

Bike, car, pets, bathroom & travel

Light mounts, dash holders, feeder risers, razor stands, cable wraps and other everyday fixes.

AirTag hidden bike bottle-cage mountA 40 × 36 × 12 mm plate that hides an AirTag under a bottle cage so a thief does not see a hanging tag.

AirTag hidden pocket for a MacBook sleeveA 40 × 36 × 10 mm TPU pocket that slips an AirTag into the seam of a 13 or 16-inch MacBook sleeve without a bulge.

AirTag hidden steerer-cap mountA steerer cap that hides an AirTag under a 1-1/8 inch top cap with a 32 mm well and a 5 mm star-nut hole.

AirTag house-key silent snap fobA silent fob that holds an AirTag and a house key on a 6 mm ring without the rattle of Apple's plastic case.

AirTag key ring holder hard shell snap caseA two-part hard shell that closes around an Apple AirTag (31.9 mm diameter, 8 mm thick) and hangs from a key ring, keeping the white plastic and steel back f…

AirTag saddle-rail stealth coverA cover that looks like a rail bumper and holds an AirTag between 7 mm rails with 1 mm TPU lips.

Apple Pencil Pro ergonomic grip sleeve TPUA slide-on TPU sleeve that thickens an Apple Pencil Pro or 2nd generation (8.9 mm across with one flat side, 166 mm long) to a 13 mm grip for long drawing se…

Apple Watch Ultra 3 Action-button bumperA TPU bumper that guards the Ultra 3 Action button and siren grille without covering the crown, 52 mm ring 2 mm thick.

Aquarium feeding ring with suction armA feeding ring stops flakes drifting into the filter intake and concentrates food where slow fish can find it.

Aquarium glass clip for airline tubingAirline and CO2 tubing float loose in an aquarium and kink over the rim.

Aquarium plant tweezers and scissors holderAquascaping tools are long and sharp, and leaving them on the cabinet top means wet drips and lost tweezers.

Away Bigger Carry-On handle AirTag clipA clip that hides an AirTag on an Away Bigger Carry-On trolley handle, 32 mm well and a 20 mm snap.

BabyBjörn bouncer toy-bar clip, 3D printable part

BabyBjörn bouncer toy-bar clipA clip that hangs a toy bar on a BabyBjörn bouncer frame, 18 mm snap and a 8 mm ring.

Black Diamond trekking pole tip protector capsRubber tip protectors for Black Diamond Trail, Distance Z and Alpine Carbon poles, as well as Leki and Komperdell, that slip over the carbide tip so the pole…

BMW iX armrest key trayA tray that sits in the iX armrest well (about 160 × 90 mm) and holds a key fob plus two cards so they do not rattle.

Bottle cage adapter for small framesSmall frames and full-suspension bikes often leave no room for a standard bottle cage in the normal position.

Bottle cage tool holder insertA tool holder shaped like a water bottle drops into a spare bottle cage and carries a tube, CO2 cartridge and multitool without a saddle bag.

Bugaboo Butterfly phone mount, 3D printable part

Bugaboo Butterfly phone mountA phone mount that clamps a 70–85 mm phone onto a Butterfly handle, 18 mm snap and a 12 mm lip.

Cannondale Scalpel bottle-cage spacerA spacer that lifts a bottle cage 12 mm off a Scalpel down tube so a 750 ml bottle clears the shock.

Canyon Grizl top-tube bag mountA mount that gives a Grizl two M5 bosses on 64 mm centres for a top-tube bag when the frame has only bottle mounts.

Clip-on rear fender for seatpostA seatpost fender stops road spray soaking your back on wet commutes and clips on without tools.

Clothes hanger connector clipsHanger connectors let a second hanger dangle from the first, doubling closet space for shirts and trousers.

Cup holder insert for narrow cansSlim 250 ml energy cans and small coffee cups rattle in a standard 80 mm car cup holder and tip on corners.

Cup holder phone mount with gooseneck baseA cup holder phone mount avoids sticky dash pads and suction cups by wedging into a cup holder with an expanding base.

Cybertruck vault-bin dividerA divider that splits a Cybertruck vault bin into two 150 mm wells for straps and a lock.

Dash vent phone holder with hook clipsA vent phone holder hangs a phone at eye level for navigation without blocking the view.

Dashboard key and sunglasses holderKeys and sunglasses slide around a flat dash and end up under the seat.

Door panel trim clip replacementDoor panel trim clips snap when you remove a card to fix a window regulator, and dealers charge a fortune for a bag.

EDC pocket organizer clip for pen and torchAn EDC organizer clip holds a pen and a small torch together on a pocket edge so they do not sink to the bottom.

Ford F-150 Lightning console trayA tray that sits in the Lightning centre-console well (about 220 × 110 mm) and holds a phone, a USB-C cable and coins so they do not rattle on the trail.

Frame bag clip for top tubeTop-tube bags held by velcro straps slide and scuff the paint, while a rigid clip holds them square.

Front fork mudguard for mountain bikeA fork-mounted mudguard sits under the crown and behind the arch to keep mud out of your eyes and off the stanchions.

Galaxy S26 Ultra car vent cradle, 3D printable part

Galaxy S26 Ultra car vent cradleA vent-clip cradle for a Samsung Galaxy S26 Ultra (about 164 × 79 × 8.1 mm) with a 82 × 12 mm well that clears the camera island and a pair of 10–16 mm slat…

Garage parking stop wheel chock for Tesla Model YA low parking stop that screws to the garage floor so the front wheel of a Tesla Model Y or any similar SUV settles into the same spot every time, leaving ro…

Garmin Dash Cam Mini 3 mirror clipA clip that hangs a Dash Cam Mini 3 (about 46 × 32 × 32 mm) from a 8–16 mm rear-view mirror stem so you are not on the glass.

Garmin Edge 540 out-front mount 22.2 mmAn out-front mount that puts an Edge 540 on a 22.2 mm road bar with a Garmin quarter-turn and a GoPro boss underneath.

Google Pixel Buds Pro 2 case carabiner clip holderA cradle that snaps around the Google Pixel Buds Pro 2 charging case (about 63 x 50 x 25 mm) and adds a carabiner loop so the earbuds clip onto a bag strap o…

GoPro-style bike light mount under computerAn under-computer light mount hangs a front light beneath an out-front GPS mount using the standard GoPro three-prong interface, freeing bar space and loweri…

Handlebar bike light mount adapterMany bike lights ship with a rubber strap that slips on cold mornings or a bracket sized for a 25.4 mm bar that will not stretch to a 31.8 mm one.

Hard earbud case with carabiner loopWired earbuds get crushed and tangled in a pocket, and a hard clamshell keeps them safe on a keyring or bag strap.

Honda Civic 11th-gen seat-gap trayA tray that fills the gap between an 11th-gen Civic seat and the console (about 30 mm) so phones stop falling.

Hyundai Ioniq 6 charge-port holsterA garage holster that parks a CCS / NACS handle next to an Ioniq 6 so the cable does not sit in a puddle.

IKEA Lack side table leg riser 50 mmA riser that slips over the bottom of each IKEA Lack table leg and adds 50 mm of height so a robot vacuum fits underneath or the table reaches sofa arm level.

iPhone 16 Pro camera lens protector bumper frameA thin raised frame that sticks around the camera plateau of an iPhone 16 Pro, the rounded square that stands about 3 mm proud of the back and measures rough…

iPhone 17 Pro Max MagSafe car vent mount, 3D printable part

iPhone 17 Pro Max MagSafe car vent mountA clip-on car vent mount for an iPhone 17 Pro Max (about 163 × 78 × 8.8 mm) that hangs from a horizontal slat 8–14 mm thick.

Kindle Paperwhite one-hand page-turn grip ringA stick-on ring grip for the back of a Kindle Paperwhite (176.7 x 127.6 mm on the 2024 model) that slips over two fingers so the tablet hangs from your hand…

Kong dog toy drying rack and wall holderA wall rack that holds stuffed Kong Classic toys upside down so they drain and dry after washing, and doubles as the place where the toys live between uses.

Laundry basket clip-on dryer sheet caddyDryer sheets and stain pens end up loose in the laundry room, and a caddy that clips onto the basket rim keeps them where you fold.

Leatherman Wave belt clip sheath holsterA rigid kydex-style holster for the Leatherman Wave+, Charge or Surge that clips onto a 40 mm belt or a MOLLE column and lets the tool drop into your palm wi…

Litter-Robot 3 step ramp for small cats and kittensA step that sits in front of a Litter-Robot 3 or Litter-Robot 4 and lowers the jump into the globe, which is around 250 mm off the floor and too high for a k…

Luggage tag with hidden address slotA luggage tag makes a suitcase easy to spot on the belt and keeps your address hidden from casual glances.

MacBook Air M4 sleeve corner guardsFour TPU corners that slip over a 13-inch Air M4 in a thin sleeve so backpack drops do not dent the aluminium.

MAM pacifier clip with ring loop and strap slotA pacifier clip that fastens to a bib or shirt and holds a MAM, Philips Avent or NUK pacifier by its ring so it stops hitting the floor.

Meshtastic T-Deck Plus dash cradleA dash cradle that holds a T-Deck Plus at 40 degrees with a 14 mm USB-C slot and a 20 mm antenna clearance.

Meshtastic T-Echo belt clipA clip that puts a LilyGO T-Echo on a 40 mm belt with the antenna up, 2 mm PETG snap.

Minimalist wallet money clipA slim card wallet with a money clip holds four cards and folded notes in a package barely thicker than the cards themselves.

MOLLE PALS pouch insert organizer for small gearA rigid insert that drops into a soft MOLLE admin pouch on a 5.11, Condor or Helikon pack and turns the sagging fabric into ordered slots for a Leatherman, a…

MOLLE webbing clip for CamelBak hydration tubeA clip that weaves through one row of 25 mm PALS webbing on a MOLLE pack, plate carrier or Osprey Talon shoulder strap and holds a 12 mm CamelBak, Source or…

NACS to J1772 adapter holsterA wall holster that parks a NACS-to-J1772 adapter so the pins stay dry, 70 mm well and a 4.5 mm hole pair.

Nanit Pro floor-stand weight plate, 3D printable part

Nanit Pro floor-stand weight plateA 160 mm plate that adds printed mass and a 8 mm rubber-foot set under a Nanit floor stand so it does not walk.

Peak Design Everyday Backpack zip AirTag pouchA pouch that slips an AirTag into the 25 mm webbing of an Everyday Backpack 20L or 30L so it is not hanging on a zipper.

Peak Design Everyday Sling 6L AirTag pouch, 3D printable part

Peak Design Everyday Sling 6L AirTag pouchA slim pouch that slips an AirTag into the webbing of a Peak Design Everyday Sling 6L without adding a bulge.

Porsche Macan Electric armrest key trayA felt-style tray that sits in a Macan Electric armrest bin for the key and sunglasses, 160 × 80 × 20 mm.

Porsche Taycan charge-port holsterA garage holster that parks a Taycan Type 2 or NACS adapter and the charge-port cap so they are not on the floor.

Race bib magnetic holder clips for running vestA set of four magnetic bib holders that pin a race number to a Salomon or Nike running vest, a Hoka singlet or a cycling jersey without safety pins puncturin…

Raised feeder stand for small dogsA raised feeder lifts food and water bowls to a comfortable height for small dogs and older pets with stiff necks.

Rimowa Essential handle AirTag sleeveA sleeve that slides an AirTag into a Rimowa Essential handle strap, 40 × 36 × 10 mm with a 32 mm well.

Rimowa Original luggage tag holder with handle strap, 3D printable part

Rimowa Original luggage tag holder with handle strapA rigid card holder that hangs from the telescopic handle of a Rimowa Original, Essential or Classic case, or an Away Carry-On and Samsonite spinner, and sho…

Rivian R1S door-pocket bottle stopA stop that keeps a 70 mm bottle from falling out of an R1S door pocket on a trail.

Rivian R1S Gen 2 console trayA tray that sits in an R1S Gen 2 console bin and splits keys, cards and a USB-C cable, 180 × 90 × 30 mm with 1.2 mm walls.

Rivian R1T tonneau prop clipA clip that holds an R1T tonneau prop so it does not rattle in the bed, 20 mm snap.

Roborock S8 dock threshold ramp for door sillsA gentle ramp that lets a Roborock S8, S7 MaxV or Q Revo climb a 20 to 25 mm door threshold that otherwise stops it dead, and a matching wedge that levels th…

RTL-SDR V4 dipole-arm clipA clip that holds RTL-SDR V4 dipole arms at 90 degrees on a window, 8 mm snap.

Ryanair 40x20x25 cm cabin bag sizer template, 3D printable part

Ryanair 40x20x25 cm cabin bag sizer templateA collapsible frame that reproduces the Ryanair small personal bag limit of 40 x 20 x 25 cm, so you can check a backpack or tote at home before it is measure…

Safety razor stand with drip baseA safety razor left flat on the sink rusts the blade and stains the ceramic.

Shimano STEPS E8000 display sun hoodA 35 mm hood that clips onto a STEPS E8000 display (about 60 × 45 mm) so the screen stays readable at noon.

Shokz OpenSwim Pro goggle strap clip, 3D printable part

Shokz OpenSwim Pro goggle strap clipA clip that parks Shokz OpenSwim Pro bone-conduction headphones (about 16 mm band) on a 12–20 mm swim-goggle strap so they do not slide during flip turns.

Shower shelf razor and bottle clipShower shelves fill up with bottles and razors that fall off the moment you reach for shampoo.

Single-speed chain guide for bottom bracketA chain guide keeps the chain from bouncing off the chainring on single-speed or 1x setups over rough ground.

Slotted soap dish with drain channelBar soap turns to mush in a flat dish, while a slotted tray drains water and lets air reach the underside.

Snap cable wrap for charging cablesCharging cables knot in a bag unless something holds the coil, and a rigid wrap works better than a velcro strap that sheds fluff.

Specialized Turbo Levo charger holsterA garage holster that parks a Turbo Levo charger (about 180 × 80 × 50 mm) and the charge-port cap.

Stokke Tripp Trapp cup holder clip for the side railA clip-on cup holder for the Stokke Tripp Trapp high chair that attaches to the wooden side rail and puts a sippy cup or snack pot within reach of a toddler…

Subaru Outback cargo-bin dividerA divider that splits the Outback side cargo bin (about 350 × 160 mm) so a lock and a washer fluid bottle stay put.

Tesla Cybertruck frunk bin dividerA divider that splits the Cybertruck frunk side bin (about 400 × 180 mm) so a lock and a towel do not become one pile.

Tesla Model 3 Highland console coin trayA tray that sits in the Highland Model 3 centre-console well (about 180 × 90 mm) and holds coins, a key card and two USB-C tips so they do not rattle.

Tesla Model 3 seat gap filler for center consoleA wedge that fills the 25 to 35 mm gap between the front seat and the center console in a Tesla Model 3 or Model Y so keys, cards and fries stop disappearing…

Tesla Model S Plaid key-card slotA slot that sits in the Model S Plaid console and parks two key cards plus a fob so they are not in a cup holder.

Tesla Model Y Juniper charge-cable hookA hook that hangs a NACS charge cable on the Juniper Model Y frunk or garage wall so the cable is not on the floor.

Tesla Model Y Juniper console-lid organizerA shallow organizer that sits under a Juniper Model Y console lid for cards and a USB-C dongle, 140 × 70 × 12 mm.

Toyota RAV4 Prime charge-cable hookA hook that hangs a RAV4 Prime J1772 cable on a garage wall so it is not on the floor.

Trek Checkpoint top-tube AirTag mountA mount that hides an AirTag under a Checkpoint top-tube bag boss so the tag is not in a saddle bag.

Type 2 Mennekes cable-tidy hookA 120 mm hook that holds a coiled Type 2 cable on a garage wall with a 8 mm drain so rain does not sit in the loop.

Uppababy Vista V3 cup-holder clamp, 3D printable part

Uppababy Vista V3 cup-holder clampA clamp that puts a 70 mm cup on a Vista V3 handlebar, 22 mm snap and a 2 mm drain.

Van cabinet magnetic key hookCampervans and work vans rarely have a good place for keys, and a hook that mounts with a magnet moves without drilling.

Volvo EX30 console coin wellA well that sits in the EX30 centre console (about 140 × 80 mm) and holds coins, a card and a USB-C tip.

VW ID. Buzz front seat-gap trayA tray that fills the ID.

Wall toothbrush holder with drain slotsToothbrushes standing in a cup collect grey water at the bottom; a wall holder with open drain slots dries them fast.

Wall-mounted leash hook with treat shelfA leash hook by the door means no more hunting under coats before a walk, and a small shelf holds treats and poop bags.

Não achou a sua peça?

Descreva-a com as suas próprias palavras e as suas próprias medidas. Comece um teste grátis de 7 dias com créditos para gerar e baixar, e cancele antes do fim se não for para você.Descreva-a com as suas próprias palavras e as suas próprias medidas, gere-a e baixe-a. Planos a partir de US$ 3,99 por mês, cancele quando quiser.

Teste grátisComeçarVer preços