1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Insta360 X5 invisible-selfie adapter
This is not a fixed STL. SpeakCAD generates the insta360 x5 invisible-selfie adapter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a insta360 x5 invisible-selfie adapter is
An adapter that puts an X5 on a 1/4-20 selfie stick at the official invisible-selfie angle, 15 degrees. Print in PETG.
X4 adapters sit the X5's extra lens in frame. Tell SpeakCAD the stick, preview the adapter in the browser for free, then download the STL.
Example prompt
Create an X5 selfie adapter, 15 degree invisible angle, 1/4-20, 2 mm PETG.
People also search
insta360 x5 adapter stlx5 invisible selfie 3d printinsta360 x5 stick adapterx5 selfie mount 3d model
Questions people ask about a insta360 x5 invisible-selfie adapter
An adapter that puts an X5 on a 1/4-20 selfie stick at the official invisible-selfie angle, 15 degrees. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an X5 selfie adapter, 15 degree invisible angle, 1/4-20, 2 mm PETG.
X4 adapters sit the X5's extra lens in frame. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
Speaker stand pole adapter, 35 mm socketA cup that fits over a 35 mm speaker stand pole and provides a flat top with screw holes for a monitor speaker or small light that lacks a pole socket.Lezyne bike light mount to GoPro adapterLezyne Macro Drive, Lite Drive and Micro Drive lights slide onto a small rail on their strap bracket.LoRa 868 MHz antenna mast clip for 25 mm poleA clip that fixes an SMA-mount 868 or 915 MHz LoRa whip antenna to a 25 mm pole so a Meshtastic or Helium node gets height and a clear view.Shower caddy hook adapter for a 19 mm shower railAn adapter that lets an over-the-showerhead caddy from Simplehuman, OXO or IKEA hang from the vertical riser rail instead, when the shower head is too low or…Sony ZV-E10 II cage with Arca plateA three-sided cage for a Sony ZV-E10 II (about 121 × 68 × 54 mm body) with a 38 mm Arca-Swiss dovetail on the base, a cold shoe on top, and cutouts for the f…DJI Mic 2 receiver cold-shoe hoodA hood that shades a Mic 2 receiver screen on a cold shoe, 40 × 30 × 18 mm.