1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA METOD hinge spacer 2 mm
This is not a fixed STL. SpeakCAD generates the ikea metod hinge spacer 2 mm to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea metod hinge spacer 2 mm is
A 2 mm spacer that sits behind a METOD hinge plate so a warped cabinet still closes. The plate is 35 × 25 mm with the official 5 mm holes. Print a set of four in PETG.
A door that springs open is a 2 mm problem. In SpeakCAD you pick 1, 2 or 3 mm, preview the spacer in the browser for free, then download the STL.
Example prompt
Create METOD hinge spacers 35×25×2 mm with 5 mm holes, PETG, print four.
People also search
ikea metod hinge spacer stlmetod door spacer 3d printikea cabinet hinge shimmetod 2mm spacer 3d model
Questions people ask about a ikea metod hinge spacer 2 mm
A 2 mm spacer that sits behind a METOD hinge plate so a warped cabinet still closes. The plate is 35 × 25 mm with the official 5 mm holes. Print a set of four in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create METOD hinge spacers 35×25×2 mm with 5 mm holes, PETG, print four.
A door that springs open is a 2 mm problem. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA KALLAX 40 mm foot riser with caster bossA 40 mm riser that replaces a KALLAX foot and adds a 10 mm boss for a plate caster so the unit rolls.IKEA HEMNES shoe-cabinet tilt stopA stop that keeps a HEMNES shoe cabinet flap (about 890 mm wide) from dropping past 15 degrees so shoes do not spill.IKEA EKET wall-mount cover capA cap that hides the EKET wall-rail screws (about 12 mm heads) so a hanging cube looks finished.Vacuum cleaner hose end cuffThe cuff where a vacuum hose meets the wand or floor head cracks from years of twisting, and once it splits the suction leaks away.Ironing board leg end capIroning board feet wear through and the bare steel tube scratches floors and slides on tile.IKEA Billy shelf pin replacement for 5 mm holesA replacement shelf support for the IKEA Billy bookcase, Hemnes and Ivar, which use 5 mm holes and lose pins every time you move house.