Replacement parts

Blender lid center cap

The removable center cap of a blender lid gets lost or cracked, and without it every smoothie splashes the counter. The cap is a 55 mm diameter plug 30 mm tall with a slight taper so it wedges into the lid opening, a 4 mm top flange for grip, a 2.5 mm wall and an internal cup shape that doubles as a 30 ml measure. Print it flange-down at 0.16 mm layers for a smooth seal, in PETG or PP, which tolerate the dishwasher better than PLA.

Blender openings are all slightly different, so SpeakCAD models the plug to the diameter and depth you measure on your lid and lets you adjust the taper until it seats firmly. Add measuring lines or a vent slot in a follow-up. Generating the cap is free in the browser.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a blender lid center cap: a cup-shaped plug 55 mm diameter at the flange tapering to 53 mm over 30 mm height, 2.5 mm walls, a 4 mm wide top flange 3 mm thick, an open top forming a 30 ml measuring cup, and 1 mm fillets.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More replacement parts

Cordless drill battery latch buttonThe spring-loaded latch button that locks a battery pack into a cordless drill wears out or snaps its tab, so the pack slides off mid-job.Lawn mower height adjuster leverPush mowers set cutting height with a plastic lever that engages notched positions, and the pawl tooth wears until the wheel drops mid-mow.Ortlieb QL2.1 pannier hook insert replacementOrtlieb Back-Roller and Sport-Roller panniers use QL2.1 hooks with small plastic inserts that adapt the hook to rack tubing of 8, 10, 12 or 16 mm; the insert…Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.Kärcher K4 trigger gun holder clip replacementA replacement for the clip on the back of a Kärcher K4 or K5 pressure washer that holds the trigger gun during storage and often snaps off in cold weather.Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.

Make your blender lid center cap now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.