1
Replacement parts
Elegoo Neptune 4 Pro bed cable strain relief
This is not a fixed STL. SpeakCAD generates the elegoo neptune 4 pro bed cable strain relief to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a bed cable strain relief, 40×25 mm clamp, 9 mm cable channel, two M3 screws, curved lead-out with 20 mm bend radius.
What a elegoo neptune 4 pro bed cable strain relief is
A strain relief that clamps the heated bed cable of a Neptune 4 Pro under the bed so it does not flex at the connector as the bed moves on Y. It is a 40 × 25 mm clamp with a 9 mm cable channel, two M3 screws and a curved lead-out with a 20 mm bend radius. Print in PETG or ASA, since the bed runs hot.
The Neptune 4 Max bed is larger and its cable exits in another spot. Open the ready-made clamp in SpeakCAD for free, change the cable size in the viewer or the chat, then download the STL.
People also search
neptune 4 pro bed cable strain relief stlneptune 4 bed cablebed cable strain relief 3d printneptune 4 pro cable clamp
Questions people ask about a elegoo neptune 4 pro bed cable strain relief
A strain relief that clamps the heated bed cable of a Neptune 4 Pro under the bed so it does not flex at the connector as the bed moves on Y. It is a 40 × 25 mm clamp with a 9 mm cable channel, two M3 screws and a curved lead-out with a 20 mm bend radius. Print in PETG or ASA, since the bed runs hot.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a bed cable strain relief, 40×25 mm clamp, 9 mm cable channel, two M3 screws, curved lead-out with 20 mm bend radius.
The Neptune 4 Max bed is larger and its cable exits in another spot. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Samsung washing machine softener siphon capA replacement siphon cap for the fabric softener compartment of Samsung front-loader detergent drawers, the small cap that goes missing and makes softener po…Bosch Purion display rain coverA snap-on cover for a Bosch Purion e-bike display that keeps rain and parking-lot knocks off the screen and buttons.CamelBak bite valve dust cover cap replacementThe hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit.Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.IKEA IVAR caster adapter plateA plate that lets you bolt a 40 mm caster under an IVAR side unit so the pine shelf becomes a rolling cart.Anycubic Kobra S1 riser feetRiser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it.