1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Enclosures & cases
Logitech MX Anywhere 4 travel case
This is not a fixed STL. SpeakCAD generates the logitech mx anywhere 4 travel case to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a logitech mx anywhere 4 travel case is
A two-part case for an MX Anywhere 4, 110 × 70 × 40 mm with 0.4 mm clearance and a 8 mm dongle well. Print in TPU.
The mouse in a pouch scuffs. Describe the mouse in SpeakCAD, preview the case in the browser for free, then download the STL.
Example prompt
Create an Anywhere 4 travel case 110×70×40 mm, 0.4 mm clearance, 8 mm dongle well, two-part TPU.
People also search
mx anywhere 4 case stlanywhere 4 travel case 3d printlogitech anywhere 4 holdermx anywhere 4 pouch 3d model
Questions people ask about a logitech mx anywhere 4 travel case
A two-part case for an MX Anywhere 4, 110 × 70 × 40 mm with 0.4 mm clearance and a 8 mm dongle well. Print in TPU.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an Anywhere 4 travel case 110×70×40 mm, 0.4 mm clearance, 8 mm dongle well, two-part TPU.
The mouse in a pouch scuffs. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More enclosures & cases
Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.Storage box for four 18650 cellsA lidded box that carries four 18650 lithium cells with each one in its own bore, so the terminals cannot touch and short in a bag.Slim case for a Raspberry Pi PicoA low-profile shell for the Raspberry Pi Pico that guards the board and exposes only the micro USB connector and the BOOTSEL button.Whoop 4.0 battery pack protective travel caseA hard case for the Whoop 4.0 slide-on battery pack, the small rectangular block that is easy to crush in a gym bag, roughly 40 x 27 x 12 mm depending on rev…Wemos D1 Mini enclosure with DHT22 sensor slotA wall-mountable box for a Wemos D1 Mini (34.2 x 25.6 mm) with a dedicated slot for a DHT22 temperature and humidity sensor.Raspberry Pi Pico W enclosure with header slotsA small box for the Raspberry Pi Pico W, a 51 x 21 mm board with two M2 holes on a 47 x 11.4 mm pattern and a castellated 40-pin edge.