Angled spice jar insert for kitchen drawer
A stepped insert that lays spice jars on their backs in a drawer so every label is readable. Each cradle is a 45 mm wide half-round trough for standard 42 mm jars with 1.5 mm clearance, tiers rise 20 mm and lean 15 degrees so jars roll back rather than forward, and a 3 mm stop at the base of each trough keeps lids clear of the drawer front. Walls are 1.6 mm and the insert prints on its back without supports.
Drawer width and jar diameter both vary, and downloaded inserts are almost always a few millimetres off. Give SpeakCAD your internal drawer size and jar dimensions and it generates rows that fill the space precisely. Free to preview in the browser, quick to modify in the chat, and only two credits when you download the finished STL.
Create a spice drawer insert 280 mm wide and 380 mm deep with four tiers of six half-round troughs 45 mm wide for 42 mm jars, tiers rising 20 mm and angled 15 degrees, 3 mm end stops, 1.6 mm walls, flat back so it prints without supports.