Gravity-fed fridge can dispenser
A two-lane rack that stores canned drinks in the fridge and rolls the next one forward as you take one. The lanes are 70 mm wide for 66 mm cans with 2 mm clearance, each sloping 6 degrees toward a 25 mm front stop, holding five cans per lane. Side walls are 2 mm, the floor is 2.5 mm, and the rack prints upside down in two dovetail-joined halves so it fits a typical bed.
Slim cans, standard cans and tall energy drinks all have different diameters, and fridge shelf depths differ too. Tell SpeakCAD the can size and shelf depth, preview the dispenser in the browser for free, add a third lane or lower the height to fit under a shelf, and download the STL once the fit is confirmed.
Design a gravity can dispenser 300 mm deep and 150 mm wide with two lanes 70 mm wide for 66 mm cans, lanes sloping 6 degrees toward a 25 mm front stop, 2 mm side walls, 2.5 mm floor, split into two halves with dovetail joints.