1
Kitchen & home
Snap-close chip bag sealing clips
A set of bag clips that seal crisps, cereal and frozen vegetables shut. Each clip is a hinged jaw 100 mm long with 1.5 mm gripping ridges, a living hinge 0.5 mm thick at one end, and a snap latch at the other with a 0.2 mm interference. The body is 4 mm thick so the hinge flexes without fatigue, and the clips print flat in a single piece. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| jaw width | 15 mm |
| jaw thickness | 4 mm |
| mouth opening between jaws | 3 mm |
| length of hinge zone | 6 mm |
| flex web thickness | 0.5 mm |
| gripping ridge height (each jaw, meets mid-gap) | 1.5 mm |
| reserved length near tip for latch | 10 mm |
| snap latch interference | 0.2 mm |
Example prompt
Create a set of three bag clips 80, 120 and 160 mm long, each a hinged jaw 15 mm wide and 4 mm thick with 1.5 mm gripping ridges, a 0.5 mm living hinge at one end, a snap latch with 0.2 mm interference at the other.
Fit notes
Long clips for cereal bags and short ones for snack packs are often wanted in the same kitchen, and SpeakCAD generates any length you name rather than a single fixed size. Preview the clip in the browser, ask for a stiffer latch or a magnet pocket so it sticks to the fridge, then download the STL and print a batch.
Questions people ask about snap-close chip bag sealing clips
A set of bag clips that seal crisps, cereal and frozen vegetables shut. Each clip is a hinged jaw 100 mm long with 1.5 mm gripping ridges, a living hinge 0.5 mm thick at one end, and a snap latch at the other with a 0.2 mm interference. The body is 4 mm thick so the hinge flexes without fatigue, and the clips print flat in a single piece.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Razor stand with drip trayReady-made, opens free. A small stand that holds a cartridge razor head-up so the blades dry between shaves and last longer.Keurig K-Cup drawer insert with 24 pod slotsReady-made, opens free. A flat insert that drops into an existing kitchen drawer and holds 24 K-Cup pods upright in a four by six grid.Instant Pot lid holder that hooks on the side handleReady-made, opens free. A hook that slides over the side handle of an Instant Pot Duo or Ninja Foodi and holds the lid upright at the side of the base while you stir or serve, so co…AeroPress Go travel funnel capReady-made, opens free. A funnel cap that replaces the AeroPress Go's drinking lid so you can fill the chamber from a hotel kettle without spilling.IKEA SKUBB hanger-connector clipReady-made, opens free. A clip that joins two SKUBB hangers vertically so a second row of clothes hangs under the first.Self-draining soap dish with raised ribsReady-made, opens free. A bathroom soap dish that lets bar soap dry between uses.