1
Kitchen & home
Razor stand with drip tray
A small stand that holds a cartridge razor head-up so the blades dry between shaves and last longer. The handle rests in a 22 mm cradle angled back 10 degrees, the head sits over a 1.5 mm deep drip tray with a slot draining to the back. The base is 70 mm across with 2 mm walls, a 4 mm rounded rim and a recess for a silicone pad. Print it upright in PETG for moisture resistance. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base length (X) | 70 mm |
| base width (Y) | 60 mm |
| base height | 8 mm |
| recess depth | 1.5 mm |
| margin from base edges | 6 mm |
| drain slot width (X direction of flow, cut through rear wall) | 3 mm |
| cradle width (X) | 22 mm |
| wall thickness | 2 mm |
| rise height | 40 mm |
| internal gap for razor handle | 12 mm |
Example prompt
Design a razor stand with a 70 x 60 mm base 8 mm tall, a 22 mm wide cradle angled back 10 degrees rising 40 mm, a 1.5 mm deep drip tray under the head draining through a 3 mm slot at the rear, 2 mm walls.
Fit notes
Razor handles vary from slim disposables to fat ergonomic grips, and SpeakCAD sizes the cradle to yours with 1 mm of play so it stands straight. Preview the stand in the browser, add a slot for a shaving brush or a suction cup mount, and download the STL once the razor sits the way you want.
Questions people ask about a razor stand with drip tray
A small stand that holds a cartridge razor head-up so the blades dry between shaves and last longer. The handle rests in a 22 mm cradle angled back 10 degrees, the head sits over a 1.5 mm deep drip tray with a slot draining to the back. The base is 70 mm across with 2 mm walls, a 4 mm rounded rim and a recess for a silicone pad. Print it upright in PETG for moisture resistance.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Breville Barista Pro 54 mm dosing funnelReady-made, opens free. A 54 mm dosing funnel that sits on a Barista Pro portafilter with a 55 mm ID and a 12 mm wall so a WDT tool does not flick grounds.SodaStream Terra bottle drying treeReady-made, opens free. A tree that holds three Terra / Duo bottles upside down on 22 mm pegs 80 mm tall with a 140 mm drip tray.Dyson HP07 filter drying rackReady-made, opens free. A rack that stands a washed HP07 HEPA+carbon filter (about 220 mm tall, 180 mm wide) on edge so it dries before you drop it back in the tower.Weighted countertop paper towel holderReady-made, opens free. A freestanding holder that dispenses a paper towel roll with one hand thanks to a tension arm resting on the roll.Nespresso Vertuo pod holder drawer under the machineReady-made, opens free. A slim drawer unit that slides under a Nespresso Vertuo Next or Vertuo Pop so the machine sits on top and the capsules live underneath.Hario V60 dripper stand with coffee scale shelfReady-made, opens free. A pour-over stand that holds a Hario V60 size 02 dripper above a mug or server while a coffee scale sits underneath and reads the total brew weight.