1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Dyson HP07 filter drying rack
This is not a fixed STL. SpeakCAD generates the dyson hp07 filter drying rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson hp07 filter drying rack is
A rack that stands a washed HP07 HEPA+carbon filter (about 220 mm tall, 180 mm wide) on edge so it dries before you drop it back in the tower. The cradle is 190 × 30 × 40 mm with 4 mm ribs and a 12 mm drip lip. Print in PETG with 2 mm walls.
Laying a wet filter flat grows mould. Describe HP07 vs HP09 in SpeakCAD, preview the rack in the browser without paying, then download the STL.
Example prompt
Model an HP07 filter drying rack 190×30×40 mm with 4 mm ribs, 12 mm drip lip, 2 mm PETG.
People also search
dyson hp07 filter rack stlhp07 filter drying stand 3d printdyson hot cool filter holderhp07 hepa drying rack 3d model
Questions people ask about a dyson hp07 filter drying rack
A rack that stands a washed HP07 HEPA+carbon filter (about 220 mm tall, 180 mm wide) on edge so it dries before you drop it back in the tower. The cradle is 190 × 30 × 40 mm with 4 mm ribs and a 12 mm drip lip. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an HP07 filter drying rack 190×30×40 mm with 4 mm ribs, 12 mm drip lip, 2 mm PETG.
Laying a wet filter flat grows mould. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Breville Oracle Jet knock-box linerA liner that drops into the Oracle Jet knock box (about 140 × 90 × 80 mm) so you empty pucks without washing the stainless every shot.Tea bag dispenser box with front slotA countertop box that holds a stack of wrapped tea bags and dispenses one at a time from a slot at the bottom.Textured coaster set with holderA set of four coasters with a matching holder for the coffee table.AeroPress stand with paper filter holder and cap slotA countertop stand that keeps an AeroPress Original or Clear chamber, plunger, filter cap and paper filters together in one spot.Gaggia Classic Pro steam-wand tip clipA clip that parks a Classic Pro steam wand over a 60 mm rinse cup so the tip does not drip on the cup warmer.Dreame L20 Ultra mop drying rackA rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots.