Nespresso Original capsule dispenser wall mounted gravity feed
A vertical gravity dispenser for Nespresso Original capsules that screws or sticks to the wall or the side of a cabinet next to the machine. The 37.5 mm flange of an Original capsule slides down a 39 mm channel with a 1 mm chamfer, and a curved lip at the bottom presents one capsule at a time while the rest wait above. Each channel holds ten capsules, and the model prints in halves that snap together with 1.5 mm pegs so the 320 mm height fits a normal bed. Use 1.6 mm walls and PETG if it sits near the steam vent.
Capsule counts, wall space and mounting method vary from kitchen to kitchen, and a fixed download rarely suits all three. In SpeakCAD you state how many channels and capsules you want and whether you prefer screw holes or an adhesive pad, check the preview in the browser at no charge, refine it in the chat and download the STL.
Model a wall-mounted gravity dispenser with three vertical channels 39 mm wide and 320 mm tall for Nespresso Original capsules with a 37.5 mm flange, 1.6 mm walls, a curved 20 mm bottom lip that presents one capsule, two 4.5 mm countersunk screw holes and a split at 160 mm with 1.5 mm alignment pegs.