1
Kitchen & home
SodaStream bottle drying rack for two bottles
A rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages. Each post is 22 mm in diameter and 120 mm tall with three fins that keep the bottle neck open for airflow, and the 1 litre bottle body, about 90 mm across, rests on a 96 mm ring. The base tray is 220 by 110 mm with a 2 mm lip and a rear drain notch so water runs into the sink. Walls are 1.6 mm, the base is 3 mm, and the posts print standing with no supports; the fins prevent a tall post from wobbling. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| tray length (X) | 220 mm |
| tray width (Y) | 110 mm |
| tray floor thickness | 3 mm |
| lip height | 2 mm |
| wall thickness throughout | 1.6 mm |
| rear drain notch width | 20 mm |
| rear drain notch depth (into lip) | 6 mm |
| post outer diameter | 22 mm |
| post height | 120 mm |
| fin thickness | 4 mm |
| fin radial length beyond post | 34 mm |
| ring outer diameter | 96 mm |
| ring height (thickness in Z) | 14 mm |
| ring center height on post | 90 mm |
Example prompt
Design a drying rack with a 220 x 110 mm base tray 3 mm thick with a 2 mm lip and a rear drain notch, two 22 mm diameter posts 120 mm tall with three 4 mm fins each, and a 96 mm support ring per post for inverted 1 L SodaStream bottles, 1.6 mm walls throughout.
Fit notes
Bottle dimensions differ between the 1 litre, 0.5 litre and the newer Quick Connect bottles, so a rack generated to your bottles seats them properly. In SpeakCAD you say which bottles you own and how many, preview the rack in the browser, add a cap holder in the chat and download the STL.
Questions people ask about a SodaStream bottle drying rack for two bottles
A rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages. Each post is 22 mm in diameter and 120 mm tall with three fins that keep the bottle neck open for airflow, and the 1 litre bottle body, about 90 mm across, rests on a 96 mm ring. The base tray is 220 by 110 mm with a 2 mm lip and a rear drain notch so water runs into the sink. Walls are 1.6 mm, the base is 3 mm, and the posts print standing with no supports; the fins prevent a tall post from wobbling.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Hario Switch 02 paper-filter caddyReady-made, opens free. A 110 × 40 × 80 mm caddy that holds a pack of 02 paper filters upright and dry next to a Hario Switch.Roborock Q Revo 20 mm threshold rampReady-made, opens free. A 400 × 80 × 20 mm ramp that lets a Q Revo climb a 20 mm doorway bar.Family toothbrush holder with drip drainReady-made, opens free. A counter stand that separates four toothbrushes and a tube of toothpaste so heads never touch and water drips through rather than pooling.Pot lid rack for cabinet or counterReady-made, opens free. A rack that stands saucepan lids on edge in a row.Dolce Gusto pod drawer that sits under the machineReady-made, opens free. A low storage drawer sized for the wide Dolce Gusto capsule, which is about 54 mm across the top and 35 mm tall, so it never fits in racks made for Nespresso.Vitamix tamper holder clip for the container baseReady-made, opens free. A clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.