Pot lid rack for cabinet or counter
A rack that stands saucepan lids on edge in a row. Six slots are 18 mm wide with 25 mm spacing, each with a rounded 8 mm groove so lid rims of different diameters sit stably, and the side supports rise 60 mm to lean lids against. The base is 3 mm with 2 mm slot walls and rubber-foot recesses so it stays put on a shelf, and the rack prints upright with no overhangs.
Glass lids are thicker than stamped steel ones and cupboards are never the same depth, so a rack generated to your lid count and shelf space fits where an off-the-shelf one juts out. Describe both to SpeakCAD, preview the rack in the browser at no charge, widen slots for chunky glass lids, and download the STL when it fits.
Create a pot lid rack 200 mm long and 120 mm deep with six slots 18 mm wide at 25 mm spacing, each with an 8 mm rounded groove, side supports 60 mm tall, 3 mm base with four 10 mm rubber foot recesses, 2 mm slot walls.