KitchenAid stand mixer bowl cover lid with pour chute
A splash lid for the 4.8 litre bowl of a KitchenAid Artisan tilt-head mixer that clips onto the rim and lets you add flour through a chute while the beater runs. The ring is about 240 mm across the rim with a 3 mm inner lip and three flexible tabs, sized so the beater shaft passes through a 45 mm central hole with a wedge cutout for the tilt head. The chute is 60 by 40 mm and slopes 30 degrees toward the centre. Walls are 2 mm and the lid prints flat on the bed in PETG, which tolerates dishwasher heat better than PLA.
Bowl rims vary between the 4.3, 4.8 and 6.9 litre models and between glass and steel bowls, so a lid generated from your own rim measurement beats a generic one. Describe your bowl in SpeakCAD, preview the lid in the browser without paying, adjust the tabs in the chat and download the STL.
Create a mixer bowl splash lid 244 mm in outer diameter with a 3 mm inner lip and three 15 mm flexible clip tabs for a KitchenAid 4.8 L bowl, a 45 mm central hole with a 70 mm wide wedge cutout for the tilt head, a pour chute 60 x 40 mm sloping 30 degrees and 2 mm walls.