1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Oral-B iO Series 10 head stand for four
This is not a fixed STL. SpeakCAD generates the oral-b io series 10 head stand for four to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a oral-b io series 10 head stand for four is
A stand that holds four iO heads on 8 mm pegs plus the handle in a 32 mm well. The base is 90 × 70 mm. Print in PETG.
Heads in a cup stay wet. In SpeakCAD you pick the head count, preview the stand in the browser without paying, then download the STL.
Example prompt
Design an iO Series 10 stand 90×70×40 mm with a 32 mm handle well and four 8 mm head pegs, 1.6 mm PETG.
People also search
oral-b io 10 stand stlio series 10 head holder 3d printoral b io charging standio 10 brush stand 3d model
Questions people ask about a oral-b io series 10 head stand for four
A stand that holds four iO heads on 8 mm pegs plus the handle in a 32 mm well. The base is 90 × 70 mm. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an iO Series 10 stand 90×70×40 mm with a 32 mm handle well and four 8 mm head pegs, 1.6 mm PETG.
Heads in a cup stay wet. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Nespresso Original capsule dispenser wall mounted gravity feedA vertical gravity dispenser for Nespresso Original capsules that screws or sticks to the wall or the side of a cabinet next to the machine.Cosori 5.5 L air fryer basket divider insertA removable divider that splits the square basket of a Cosori 5.5 litre air fryer into two halves so you can cook fries and nuggets without mixing.Ninja Creami Deluxe pint-lid rack for sixA fridge rack that holds six Creami Deluxe pints (about 90 mm) on 92 mm rings with 8 mm gaps so labels stay readable.Dyson Supersonic diffuser wall hookA hook that hangs the wide Supersonic diffuser (about 95 mm across) next to the dryer so it is not the thing that never goes back in the box.Roborock S8 Pro Ultra mop drying rackA rack that stands two S8 Pro Ultra mop pads (about 150 × 70 mm) on edge after a wash so they dry before the next dock cycle.Snap-close chip bag sealing clipsA set of bag clips that seal crisps, cereal and frozen vegetables shut.