1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Nespresso Original capsule carousel for 40 pods
This is not a fixed STL. SpeakCAD generates the nespresso original capsule carousel for 40 pods to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nespresso original capsule carousel for 40 pods is
A 180 mm carousel that holds 40 Original-line capsules in two stacked rings of 20, each pocket 17.5 mm with 0.3 mm clearance. A 8 mm centre pin lets it spin on a 90 mm base. Print the rings and base in PLA.
A drawer of loose pods is how you grab decaf at 6 am. Tell SpeakCAD the pod count, preview the carousel in the browser without paying, then download the STL.
Example prompt
Model a 180 mm capsule carousel, two rings of 20 pockets 17.5 mm with 0.3 mm clearance, 8 mm centre pin, 90 mm base, PLA.
People also search
nespresso capsule carousel stloriginal line pod holder 3d print40 nespresso pod spinnernespresso original carousel 3d model
Questions people ask about a nespresso original capsule carousel for 40 pods
A 180 mm carousel that holds 40 Original-line capsules in two stacked rings of 20, each pocket 17.5 mm with 0.3 mm clearance. A 8 mm centre pin lets it spin on a 90 mm base. Print the rings and base in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a 180 mm capsule carousel, two rings of 20 pockets 17.5 mm with 0.3 mm clearance, 8 mm centre pin, 90 mm base, PLA.
A drawer of loose pods is how you grab decaf at 6 am. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
KitchenAid flex-edge beater drying standA stand that holds a KitchenAid flex-edge beater (about 140 mm across the hub) upright so the silicone edge dries after washing.Dreame X40 Ultra mop drying rackA rack that stands two X40 Ultra mop pads (about 160 × 75 mm) on edge after you rinse them, 170 × 42 × 52 mm with two 8 mm slots.Gravity-fed fridge can dispenserA two-lane rack that stores canned drinks in the fridge and rolls the next one forward as you take one.Tassimo T-Disc holder rack for 30 discsAn angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging.Wide mouth Mason jar sprouting lid with mesh 86 mmA sprouting lid for wide mouth Ball, Kerr or Bernardin Mason jars with the 86 mm thread, letting you rinse and drain alfalfa, lentil or broccoli sprouts twic…SodaStream Terra bottle drying treeA tree that holds three Terra / Duo bottles upside down on 22 mm pegs 80 mm tall with a 140 mm drip tray.