1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Dreame L20 Ultra mop drying rack
This is not a fixed STL. SpeakCAD generates the dreame l20 ultra mop drying rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dreame l20 ultra mop drying rack is
A rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots. Print in PETG.
Pads left in the dock stay sour. Tell SpeakCAD the pad count, preview the rack in the browser without paying, then download the STL.
Example prompt
Model an L20 Ultra mop rack 180×40×80 mm with two 6 mm slots, 1.6 mm PETG.
People also search
dreame l20 mop rack stll20 ultra pad dryer 3d printdreame mop drying standl20 ultra mop holder 3d model
Questions people ask about a dreame l20 ultra mop drying rack
A rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an L20 Ultra mop rack 180×40×80 mm with two 6 mm slots, 1.6 mm PETG.
Pads left in the dock stay sour. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Ninja Foodi PossibleCooker lid standA stand that parks a PossibleCooker lid (about 260 mm) on its side so the condensation drips into the pot, not the counter.Pot lid rack for cabinet or counterA rack that stands saucepan lids on edge in a row.Senseo coffee pad dispenser tube for 18 padsA vertical tube with an open front slot that stacks Senseo pads and lets you slide the bottom one out with a thumb.Philips Avent baby bottle drying rack with nipple pegsA compact drying rack for Philips Avent Natural bottles with pegs for the wide nipples, screw rings and caps that always end up in a puddle beside the sink.SodaStream Terra bottle drying treeA tree that holds three Terra / Duo bottles upside down on 22 mm pegs 80 mm tall with a 140 mm drip tray.Dyson Airwrap barrel drying treeA tree that stands four Airwrap barrels nozzle-up after you wipe them so water does not sit in the magnet.