1
Kitchen & home
Cosori 5.5 L air fryer basket divider insert
A removable divider that splits the square basket of a Cosori 5.5 litre air fryer into two halves so you can cook fries and nuggets without mixing. The basket interior measures roughly 210 by 210 mm at the top and tapers, so the divider is 205 mm long, 80 mm tall and 3 mm thick with a slotted lower edge that sits between the crisper plate holes and lets hot air pass. Two 10 mm tabs rest on the basket rim. Print it flat in a high-temperature material such as PETG-CF or PA, since PLA will soften at air fryer temperatures; check your filament rating before use. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| overall length | 205 mm |
| overall height (below tabs) | 80 mm |
| wall thickness | 3 mm |
| slot width | 6 mm |
| slot depth | 15 mm |
| inset from each side edge | 5 mm |
Example prompt
Create a flat air fryer basket divider 205 mm long, 80 mm tall and 3 mm thick for a Cosori 5.5 L square basket, with a lower edge cut into 6 mm wide slots 15 mm deep for airflow, two 10 x 8 mm tabs at the top corners to rest on the rim and 1 mm rounded edges.
Fit notes
Basket sizes vary between Cosori, Philips and Ninja and between the 3.5, 5.5 and 6.4 litre models, which is why a divider measured to your basket is worth generating. In SpeakCAD you type the interior dimensions, preview the divider in the browser, refine the tabs in the chat and download the STL.
Questions people ask about a Cosori 5.5 L air fryer basket divider insert
A removable divider that splits the square basket of a Cosori 5.5 litre air fryer into two halves so you can cook fries and nuggets without mixing. The basket interior measures roughly 210 by 210 mm at the top and tapers, so the divider is 205 mm long, 80 mm tall and 3 mm thick with a slotted lower edge that sits between the crisper plate holes and lets hot air pass. Two 10 mm tabs rest on the basket rim. Print it flat in a high-temperature material such as PETG-CF or PA, since PLA will soften at air fryer temperatures; check your filament rating before use.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Oral-B iO Series 10 head stand for fourReady-made, opens free. A stand that holds four iO heads on 8 mm pegs plus the handle in a 32 mm well.Coffee pod holder tray for a drawer or counterReady-made, opens free. A tray that stands coffee capsules in tidy rows so you can see how many are left and grab a flavour without digging through a bag.Cotton swab dispenser with lift lidReady-made, opens free. A bathroom box that stores cotton swabs upright.Tassimo T-Disc holder rack for 30 discsReady-made, opens free. An angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging.SodaStream bottle drying rack for two bottlesReady-made, opens free. A rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages.Fellow Stagg EKG drip-tray gridReady-made, opens free. A 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.