1
Kitchen & home
Tassimo T-Disc holder rack for 30 discs
An angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging. T-Discs are about 71 mm in diameter and 20 mm thick, so the rack uses 22 mm slots with a 5 mm lip on the front and a 15 degree backward lean so discs stay put when the rack is bumped. Three tiers of ten fit a footprint of 240 by 150 mm, small enough to sit beside a Tassimo Happy or Style. Walls are 1.6 mm and the base is 3 mm so it does not rock. Print it upright with the slots facing up; no supports are needed. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| overall width | 240 mm |
| overall depth (footprint, including lean) | 150 mm |
| overall height | 110 mm |
| base plate thickness | 3 mm |
| wall / shelf thickness | 1.6 mm |
| slots per tier | 10 |
| slot width | 22 mm |
| slot length | 75 mm |
| front lip height | 5 mm |
Example prompt
Model a three-tier rack 240 mm wide, 150 mm deep and 110 mm tall with ten slots per tier 22 mm wide and 75 mm long for Tassimo T-Discs 71 mm in diameter, a 15 degree backward lean, 5 mm front lips, 1.6 mm walls and a 3 mm base.
Fit notes
A generated rack can match the number of discs you actually keep and the exact width of your shelf, instead of the size someone else's counter allowed. Describe it in SpeakCAD, preview it in the browser, ask for a wall-mounted or narrower version in the chat, then download the STL.
Questions people ask about a Tassimo T-Disc holder rack for 30 discs
An angled rack that stores Tassimo T-Discs on edge so you can read the barcode side and pick a flavour without digging. T-Discs are about 71 mm in diameter and 20 mm thick, so the rack uses 22 mm slots with a 5 mm lip on the front and a 15 degree backward lean so discs stay put when the rack is bumped. Three tiers of ten fit a footprint of 240 by 150 mm, small enough to sit beside a Tassimo Happy or Style. Walls are 1.6 mm and the base is 3 mm so it does not rock. Print it upright with the slots facing up; no supports are needed.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More kitchen & home
Cotton swab dispenser with lift lidReady-made, opens free. A bathroom box that stores cotton swabs upright.Senseo coffee pad dispenser tube for 18 padsReady-made, opens free. A vertical tube with an open front slot that stacks Senseo pads and lets you slide the bottom one out with a thumb.SodaStream bottle drying rack for two bottlesReady-made, opens free. A rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages.Fellow Stagg EKG drip-tray gridReady-made, opens free. A 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.Dreame L20 Ultra mop drying rackReady-made, opens free. A rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots.Tea bag dispenser box with front slotReady-made, opens free. A countertop box that holds a stack of wrapped tea bags and dispenses one at a time from a slot at the bottom.