Senseo coffee pad dispenser tube for 18 pads
A vertical tube with an open front slot that stacks Senseo pads and lets you slide the bottom one out with a thumb. Senseo pads are about 70 mm across and roughly 8 mm thick, so the tube has a 72 mm inner diameter, a 25 mm wide front slot and a 12 mm gap at the base to pull one pad free. A 160 mm tube holds 18 pads; a lid with a 1 mm friction lip keeps the top pad from drying out. Print it standing with 1.2 mm walls, or lay it on its back with a flat face if you want to stick it to a cabinet.
Downloaded pad tubes are often sized for Dolce Gusto or Nespresso and are either too tight or wobbly for a soft pad. In SpeakCAD you describe the pad diameter and how many you store, preview the tube in your browser at no charge, ask for a wall-mount or a two-tube version in the chat, and download the STL.
Create a vertical dispenser tube 72 mm inner diameter and 160 mm tall with 1.2 mm walls for Senseo coffee pads 70 mm in diameter, a 25 mm wide front slot running full height, a 12 mm pull-out gap at the base, a 3 mm base plate and a press-fit lid with a 1 mm friction lip.