1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Gillette Labs exfoliating-bar razor stand
This is not a fixed STL. SpeakCAD generates the gillette labs exfoliating-bar razor stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a gillette labs exfoliating-bar razor stand is
A stand that holds a Gillette Labs razor by the bar so the blades dry, 20 mm saddle and a 40 mm drip tray. Print in PETG.
The magnetic dock stays in the travel case. Tell SpeakCAD the bar width, preview the stand in the browser for free, then download the STL.
Example prompt
Model a Gillette Labs stand, 20 mm saddle, 40 mm drip tray, 1.6 mm PETG.
People also search
gillette labs stand stlgillette labs razor holder 3d printexfoliating bar standgillette labs dock 3d model
Questions people ask about a gillette labs exfoliating-bar razor stand
A stand that holds a Gillette Labs razor by the bar so the blades dry, 20 mm saddle and a 40 mm drip tray. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Gillette Labs stand, 20 mm saddle, 40 mm drip tray, 1.6 mm PETG.
The magnetic dock stays in the travel case. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
SodaStream bottle drying rack for two bottlesA rack that holds two upside-down SodaStream bottles so the narrow neck drains and the inside dries, which a dish rack never manages.Instant Pot Pro Crisp lid standA stand that parks a Pro Crisp air-fryer lid (about 280 mm) on its side so the element cools without scorching the counter.Dyson HP07 filter drying rackA rack that stands a washed HP07 HEPA+carbon filter (about 220 mm tall, 180 mm wide) on edge so it dries before you drop it back in the tower.KitchenAid ice-cream bowl freezer riserA riser that parks the KitchenAid ice-cream freeze bowl (about 210 mm diameter) in a freezer so air can move under it and it freezes faster.Measuring spoon and cup drawer rackA flat rack that lays measuring spoons and cups in graduated nests inside a drawer so the set stays in order.Nespresso Vertuo pod holder drawer under the machineA slim drawer unit that slides under a Nespresso Vertuo Next or Vertuo Pop so the machine sits on top and the capsules live underneath.